光纤陀螺信号处理中SLD驱动电路设计

光纤陀螺用光源要求输出功率高、相干性低、稳定性好，超辐射发光二极管（SLD）是能满足这些要求的理想光源，目前国内光纤陀螺用的光源基本上主要选择超辐射发光二极管（SLD），从工程实际应用出发，介绍了超辐射发光二极管（SLD）驱动电路设计，以此来提高光纤陀螺性能。     

潜热型热功能流体强化换热分析

本文建立了分析带有相变微胶囊的潜热型热功能流体的流动和换热过程数理模型,应用有限差分法和移动热源法进行联合求解。计算结果表明,相变微胶囊的加入:较好地提高了流体的换热性能。获得了相变颗粒大小和体积分数对强化换热影响等结果。计算结果对该类流体的设计和应用提供了理论依据。     

Studies on the blends of cardanol-based epoxidized novolac resin and CTPB

Cardanol-based novolac-type phenolic resins were synthesized with different mole ratios of cardanol-to-formaldehyde, viz., 1:0.6, 1:0.7, and 1:0.8. These novolac resins were epoxidized with molar excess of epichlorohydrin at 120 °C in basic medium. The epoxidized novolac resins were, separately, blended with different weight ratios of carboxyl-terminated polybutadiene liquid rubber ranging between 0-25 wt% with an interval of 5 wt%. All the blends were cured at 150 °C with 40 wt% polyamide. The formation of various products during the curing of blend samples has been studied by Fourier-transform infra-red spectroscopic analysis. The tensile strength and elongation-at-break of the cured samples increased up to 15 wt% in the blend and decreased thereafter. This blend sample was also found to be most thermally stable system. The blend morphology, studied by scanning electron microscopy analysis, was finally correlated with the structural and property changes in the blends.     

轴线起爆式螺线管型爆磁压缩发生器理论模型

 对轴线起爆式螺线管型爆磁压缩发生器进行了理论模型研究，建立了爆炸管的一维爆轰驱动模型、螺线管内空间磁场强度分布模型、爆炸管外表面磁压力模型和发生器系统的等效电路模型等，对此类发生器的物理过程进行系统描述。在此基础上，编制了相应的零维数值模拟程序CEMG 1.0，利用该程序分别对四种不同模型参数的发生器进行了理论计算和参数优化，并对其中一模型发生器爆炸管外表面的磁压力及其引起的剩余电感进行了计算，给出了剩余电感与初始输入条件及负载电感的关系，从而得到该模型的输出性能极限。对理论模型的正确性进行了实例验算证明。     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

Determination of the rheological behavior of epoxy–amine thermosets by dynamic mechanical analysis: Isothermal methods versus nonisothermal methods

The reticulation process of an epoxy resin using an amine as a cure agent was studied at different temperatures and concentrations of the cure agent with dynamic mechanical thermal analysis. The study was performed under both isothermal and nonisothermal conditions, and a temperature–time–transformation diagram was obtained. The measurements from the two modes gave similar results, although the nonisothermal mode required fewer experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1965–1977, 2003     

热喷涂技术的现状和发展

介绍了热喷涂工艺的特点，喷涂方法的种类及其技术以及热喷涂技术的应用概况，并对热喷涂技术的发展方向给予了展望。     

Thermal analysis as a tool in the study of GMM in Angra Dos Reis region,Rio de Janeiro,Brazil

Angra dos Reis/Itaguai region of the state of Rio de Janeiro, Brazil, is a very problematic area due to the instability of slope and landslides, due to geological and geomorphological conditions and to the significant and continuous human occupation over favorable areas is prone to the triggering of landslides. The samples were analyzed by thermogravimetry (TG), derivative thermogravimetry (DTG) and differential thermal analysis (DTA). This paper analyzes and characterizes the clay minerals and presence of water, gravitational mass movements’ sites and compares it with sites where gravitational mass movements do not occur. Indeed, this analysis also attempts to verify the presence of minerals.