并联换热系统中冷媒分配的优化分析

为减小并联换热系统的质量,本文在一定的简化和假设之上,建立了其流动与传热的物理和数学模型;并以系统总换热面积最小为优化目标,通过对分配系数的变量转换,提出了一种可准确求解最佳分配系数的方法,并对计算结果进行了讨论,发现分配系数的结果与势容耗散最大基本一致.根据计算结果.本文给出了支路较少时分配系数与换热支路效能之间的近似关联式.     

Decontamination Efficiency of Thermal,Photothermal, Microwave,and Steam Treatments for Biocontaminated Household Textiles

With the outbreak of the COVID-19 pandemic, textile laundering hygiene has proved to be a fundamental measure in preventing the spread of infections. The first part of our study evaluated the decontamination efficiency of various treatments (thermal, photothermal, and microwave) for bio contaminated textiles. The effects on textile decontamination of adding saturated steam into the drum of a household textile laundering machine were investigated and evaluated in the second part of our study. The results show that the thermal treatment, conducted in a convection heating chamber, provided a slight reduction in efficiency and did not ensure the complete inactivation of Staphylococcus aureus on cotton swatches. The photothermal treatment showed higher reduction efficiency on contaminated textile samples, while the microwave treatment (at 460 W for a period of 60 s) of bio contaminated cotton swatches containing higher moisture content provided satisfactory bacterial reduction efficiency (more than 7 log steps). Additionally, the treatment of textiles in the household washing machine with the injection of saturated steam into the washing drum and a mild agitation rhythm provided at least a 7 log step reduction in S. aureus. The photothermal treatment of bio contaminated cotton textiles showed promising reduction efficiency, while the microwave treatment and the treatment with saturated steam proved to be the most effective.     

孔梯度陶瓷纤维复合膜管的制备及特性

陶瓷过滤管具有孔隙率高、耐腐蚀、耐高温、机械强度高、便于清洗、使用寿命长等优点,是高温烟尘处理用的高效过滤元件.本文研制了一种具有梯度孔结构堇青石陶瓷纤维复合膜过滤元件,该过滤元件是由多孔支撑体、过渡层和分离膜层组成.其中支撑体、过渡层和分离层的气孔率分别为35～40;、50～60;和60～70;.文中主要分析了孔梯度陶瓷纤维复合膜管的材料结构和抗热震性能,同时对复合膜管进行含尘气体过滤的冷态模拟试验.对于烟气中粒径大于或等于0.1μm的颗粒,复合膜管的截留率达到99.8;以上.     

Preparation of CdO nanoparticles by mechanochemical reaction

CdO nanoparticles of 43 nm in crystal size were successfully synthesized by the mechanochemical reaction (CdCl₂ + Na₂CO₃) with NaCl as a diluent and subsequent thermal treatment at 700°C for 2 h. The samples were characterized by differential thermal analysis (DTA), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and transmission electron microscopy (TEM). Effect of calcination temperature on the crystal size of CdO nanoparticles was primarily investigated. The apparent activation energy of CdO nanoparticle formation during thermal treatment was calculated to be 12.2 kJ/mol.     

新型风成像干涉仪温度补偿理论研究

简述了高层大气风场被动式遥感探测的基本原理;论述了新型风成像干涉仪宽场、消色差、温度补偿理论,针对目前国际上采用的风成像干涉仪补偿方法的不足,从理论上进行了分析与讨论,给出了四层介质的优化补偿理论和方案.模拟结果表明,该补偿可完全理想地消去单色光的温差,且复色光的温差补偿要比现有的方法提高1—2个量级.该研究为设计宽场、消色差、温度补偿的新型风成像干涉仪和提高风场探测精度提供了重要的理论依据和实践指导.     

光纤微位移法测量固体线膨胀系数

本文绘出了一种金属固体线膨胀系数的测量方法,即采用光纤位移传感器的方法（光纤微位移法）来测量固体的线膨胀系数．测量了黄铜的线胀系数,分别用逐差法和线性回归法处理了实验数据,并与标准值进行了比较．     

一种模拟热导率的非平衡分子动力学方法

提出一种计算热导率的非平衡分子动力学(NEMD)方法,通过构造均匀内热源获得抛物线形温度分布,并基于Fourier导热定律计算热导率,与Müller-Plathe发展的反扰动非平衡分子动力学(RNEMD)方法相比,不仅具有能量动量守恒和收敛性好的优点,还克服了常规NEMD方法中热冷源区域存在局域热力学非平衡的问题,并有模拟系统温差影响小的特点.对液态氩的热导率进行模拟并与RNEMD方法的模拟结果进行对比.     

4~20 K 温区固体界面导热填料接触热阻实验研究

超导量子干涉仪、 超导光子探测器等深空探测器需要液氦温区制冷技术提供极低温温度, 固体界面接触热阻的存在会增大耦合界面温度差, 进而增加制冷机系统冷损. 为定量探究4~20 K 深低温区固体接触热阻, 采用GM 作为冷源, 设计了一台可同时调节压力和低温温度的固体界面接触热阻测试实验台. 利用感压纸进行接触界面压力校核, 并对温度重复性进行验证. 实验测试了不同导热介质填充情况下, 温度和压力变化时固体接触热阻的变化规律. 基于最小二乘法对实验数据进行半经验公式拟合, 获得4 ~20 K 温区不同压力加载条件下的接触热阻的定量参考.     

Influences of nanoparticles and chain length on thermodynamic and electrical behavior of fluorine liquid crystals

Hydrogen-bonded polar nematic liquid crystal series with the general formula nOBAF (n = 7—12) is studied. The mesomorphic characterization is demonstrated through differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The complexes with short alkyl chains (n=7, 8) present a wide nematic range and monotropic smectic F mesophase, whereas the longer alkyl chain (n=10—12) analogues show high melting and low clearing mesomorphic liquid crystals. The thermal range of the mesophase and the birefringence increase with chain length decreasing. Furthermore, the effect of the nanoparticles (LiNbO₃) on the thermal and the electrical behavior of 8OBAF are investigated. The presence of LiNbO₃ nanoparticles increases the conductivity and reduces the resistivity of the complex.     

3ω方法及其在纳米材料器件表征中的应用

阐明了3ω方法的机理，并在此基础上讨论了它的一些基本应用.利用3ω方法可以对具有优 良导热和导电能力的材料的热导率和热容进行测量；对不能导电的材料，固态的或液态的， 利用3ω方法能对它们的热导率进行测量.对测量中涉及到的热辐射问题的讨论表明，由于使 用的是小样品，热辐射造成的影响可以忽视.通过理论推导，使用二维隧穿结点阵并借助3ω 方法，可以给出一种性能良好的二维库仑阻塞测温法. 关键词： 3ω方法 热容（定压） 热导率 库仑阻塞