Titanium production in a plasma reactor: A feasibility investigation

The feasibility of producing titanium metal from titanium tetrachloride in a thermal plasma under equilibrium and adiabatic expansion conditions has been theoretically investigated. Free energy minimization and adiabatic expansion calculations to simulate a nozzle expansion were used to study the practicality of production. The crucial requirements for the production of titanium powder from TiCl₄ and H₂ appear to be rapid quenching of the plasma gas at high temperature (e.g., 3700 K) and appropriate reactant concentrations. Quenching of tire plasma gas and production of titanium powder can be achieved by adiabatic expansion through a nozzle. Preliminary experimental data indicate that titanium powder of approximately 5 nm in size can be produced in an argon plasma rising a nozzle expansion approach.     

第一性原理计算钛酸铅A位掺杂对其负热膨胀性的影响

近年来,实验发现钛酸铅基材料具有负热膨胀性,且其热膨胀程度会受到掺杂元素的影响. 目前所研究的A位掺杂体系中,仅Cd原子掺杂能使钛酸铅负热膨胀性增强. 所以研究A位掺杂钛酸铅,比较Cd原子与其他原子在掺杂钛酸铅时化学键的异同,有助于深刻理解钛酸铅负热膨胀的本质. 本文利用第一性原理,分别优化了Sr、Ba、Cd掺杂钛酸铅的晶格常数,计算了它们的态密度和电荷密度. 结果表明Cd―O键的共价性强于Pb―O键,而Ba―O键和Sr―O键几乎呈离子性,Ba/Sr对Pb的替代削弱了化合物的共价性,降低了自发极化强度. 与实验测量的热膨胀系数对比可以发现,A位原子与氧原子之间的共价性增强,化合物负热膨胀程度升高;若A位原子与氧原子之间的共价性削弱,负热膨胀程度降低. 可见A位原子与氧原子之间的共价性影响了钛酸铅基化合物负热膨胀性.     

A new multi analytical approach for the identification of synthetic and natural dyes mixtures. The case of orcein-mauveine mixture in a historical dress of a Sicilian noblewoman of nineteenth century

Abstract

In this paper, the application of a multi-analytical approach for the characterisation of synthetic and natural dyes in a historical textile is presented. The work is focused on a historical dress of a Sicilian noblewoman, dating from about 1865–1870. Firstly, SERS on fibre was performed, in order to individuate the classes of dyes employed. The SERS spectra suggested the presence of two main dyes: mauveine and orcein. In order to confirm these preliminary results, two different extraction protocols were applied. The extracts obtained were analysed by ESI-MS, MALDI-ToF and UHPCL-MS analyses, confirming the SERS results. In particular, the application of the ammonia mild extraction technique allowed to selectively extract the phenoxazonic dyes, separating them already in the extraction step from the synthetic ones. Thanks to this multi-analytical approach, this dress could be considered as one of the first examples of employment of synthetic dyes in association with natural ones.     

p—Si上电沉积Ni—W—P薄膜的结构与热稳定性

研究了ｐ－Ｓｉ上恒电流沉积Ｎｉ－Ｗ－Ｐ合金薄膜组成与结构的关系，讨论了镀层的组成、结构随沉积时间的变化．测定了非晶合金的晶体结构随热处理温度的改变以及ＤＴＡ曲线，结果表明，非晶Ｎｉ－Ｗ－Ｐ合金在晶化过程中形成两个纳米超微晶相，非晶Ｎｉ－Ｗ－Ｐ薄膜的热稳定性远高于通常使用的非晶Ｎｉ－Ｐ薄膜．     

酞侧基聚芳醚酮的热学性能

酞侧基聚芳醚酮的热学性能谢红卫，李滨耀（中国科学院长春应用化学研究所长春１３００２２）关键词酞侧基聚芳醚酮，ｐｖＴ行为，导热系数，定压比热容酞侧基聚芳醚酮（ＰＥＫ－Ｃ）具有较高的玻璃化转变温度，其流变加工性能和力学性能已被广泛研究［１～３］，被证明是...     

气相色谱法研究配位化合物的热稳定性——ⅩⅢ.普鲁士蓝化合物的热分解及其加氢反应研究

普鲁士蓝化合物的热分解过程,可分为三个阶段:(1)脱水;(2)Fe³⁺还原至Fe²⁺;(3)C≡N^-键的断裂。H₂气中的热分解由于发生了一系列的加氢反应,分解产物及所对应的分解温度都不同于He气中的情况,其产物的种类增加,C≡N^-键的断裂温度降低。普鲁士蓝化合物中,CN^-呈典型的双端基配位,可看作是一种双金属配位的活化模型,与CN^-呈单端基配位的K₃[Fe(CN)₆]相比,C≡N^-键的活化程度增加,不仅断裂温度降低,且能发生更深度的加氢反应。     

Synthesis and thermal stability of silicon-containing esters of phosphorus acids

A number of trialkylsilylmethyl diphenyl phosphates MeRR′SiCH₂OP(O)(OPh)₂ (1a-e: R=Et (a), Pr (b), CF₃CH₂CH₂ (c, e), Me₃SiCH₂ (d); R′=Me (a-d), Et (e)) were synthesized and their thermal rearrangement, of the 1,2-shift type, was studied. The rearrangement consists of the migration of an alkyl group from Si atom to the methylene carbon atom and gives the corresponding silyl esters. The rate of the rearrangement was found to increase in the order1d<1b<1a<1 (R=R′=Me)<1c corresponding to the enhancement of the total inductive effect (−I) of the substituents at the Si atom. The relative migration ability of the substituents at the Si atom, determined by GC/MS analysis of the disiloxane fraction resulting from hydrolysis of pyrolyzed phosphates1a-e, increases in the order R=Pr<Et<CF₃CH₂CH₂<Me≪Me₃SiCH₂, which differs substantially from the order in which the rate of the rearrangement of phosphates1a-d changes. The electronegativity of the migrating group affects noticeably the relative ability to migrate. For Part 4, see Ref. 1. Deceased. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 9, pp. 1767–1772, September, 1998.     

Thermochemical Investigations of Calcium Carbonate Phase Transitions I. Thermal activated vaterite—calcite transition

The vaterite—calcite transition above 630 K has been studied by isothermal and non-isothermal differential scanning calorimetry. Vaterite samples prepared under different conditions were investigated. The transition temperature is strongly dependent on the sample preparation. The observed transition enthalpy H_tr is nearly equal for different samples and experimental conditions. From 28 measurements a value of H_tr–(3.12±0.11) kJ mol^–1 was obtained. The activation energy for the polymorphic transition was calculated from the Arrhenius plot and by use of isoconversional methods, as a function of the degree of conversion. The influence of the kinetic model distortion and experimental uncertainties on the obtained data was discussed. The actual value of the activation energy was assessed at E_a=(250±10) kJ mol^–1 for nearly all examined samples. Functions, corresponded to the model mechanism of nuclei formation and growth, provide the unambiguous consideration of the transition kinetic for the investigated vaterite samples. Differences in the dynamic behaviour of several samples at the transition are established.This revised version was published online in November 2005 with corrections to the Cover Date.     

Synthesis, Structures, and Thermal Expansion of the La2W2−xMoxO9 Series

The La₂W_2−xMo_xO₉ series has been synthesized by the ceramic method. An alternative synthesis using microwave radiation is also reported. La₂W₂O₉ has two polymorphs and the low-temperature phase (α) transforms to the high-temperature form (β) at 1077°C. The influence of the W/Mo substitution in this phase transition has been investigated by DTA. The β structure for x≥0.7 compositions can be prepared as single phase at any cooling rate. The β phase for 0.3≤x≤0.7 compounds can be prepared as single phase by quenching, whereas a mixture of α and β phases is obtained by slow cooling. The W/Mo ratio in both coexisting phases is different with the β-phase having a higher Mo content. The x=0.1 and 0.2 compounds have been prepared as mixtures of phases. The room temperature structure of β-La₂W_1.7Mo_0.3O₉ has been analyzed by the Rietveld method in P2₁3 space group. The final R-factors were R_WP=9.0% and R_F=5.6% with a structure similar to that of β-La₂Mo₂O₉. Finally, the thermal expansion of both types of structures has been determined from a thermodiffractometric study. The thermal expansion coefficients were 2.9×10⁻⁶ and 9.7×10⁻⁶°C⁻¹ for α-La₂W₂O₉ and β-La₂W_1.2Mo_0.8O₉, respectively.     

Studies of solvent effects

The effect of water on the conformational preferences of acetylcholine has been studied within the discrete, the continuum and the combined discrete-continuum models described in parts I and II of this series. All the models lead to the conclusion that the trans-gauche form which is, following refined quantum-mechanical computations, the intrinsically preferred one and the one observed in the crystal of acetylcholine and of a number of analogues should remain also the preferred conformation in water. This result agrees with NMR studies. The results of the empirical discrete model used here compare favorably to those obtained by an ab initio super-molecule treatment. The continuum model utilized here represents a net improvement above such models utilized in other works.