Effects of medium and chemical modification on thermal characteristics of Β-lactoglobulin

The thermal properties of -lactoglobulin (-LG) were studied by differential scanning calorimetry (DSC) under different medium conditions.pH, neutral salts, protein perturbants, and polyols all affected the DSC characteristics of -LG. Acylation with fatty acids also changed the thermal properties, particularly peak width at half-height. The results suggest that the structural stability of -LG is controlled by non-covalent forces, particularly electrostatic and hydrophobic interactions. Disulfide bonds did not contribute to the thermal response of -LG. Fatty N-acyl-amino acids caused marked increases in thermal stability and decreases in denaturation enthalpy, and additional peaks were observed in the presence of some palmitoyl derivatives.Contribution No. 2310, Centre for Food and Animal Research.We thank D. Raymond for her excellent technical assistance.     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .     

Oxidation kinetics of timahdit and tarfaya moroccan oil shales

Organic matter evolution and kinetics of combustion of Tarfaya and Timahdit oil shales have been examined by thermogravimetry (TG) and by differential thermal analysis (DTA). An agreement is observed between both techniques where it was found that combustion of organic matter occurs in two steps. Kissinger's method applied on experimental results gives an activation energy of the same magnitude for the first step of both oil shales (103 kJ mol^–1) whereas the second is 148 kJ mol^–1 for Timahdit and 118 kJ mol^–1 for Tarfaya.The changes in specific surface area during thermal combustion of Timahdit and Tarfaya oil shales have been studied by thermogravimetric gas sorption balance and correlated with experimental results obtained on TG/DTA in air. For Timahdit oil shale oxidation products, specific surface areas calculated from nitrogen adsorption data shows a slight increase during the temperature domain of 280 to 430°C and after this temperature, they increase sharply. However, data obtained with Tarfaya oil shales shows a significant increase at the temperature of maximum oxidation of the first stage of combustion of organic matter.This revised version was published online in November 2005 with corrections to the Cover Date.     

Composting of urban solid residues (USR) by different dispositions

The thermal behavior and non-isothermal kinetics of thermal decomposition of three different kinds of composting of the USR like: stack with drilled PVC tubes (ST), revolved stack (SR) and stack with material of structure (SM), from the usine of composing of Araraquara city, Săo Paulo state, Brazil, within a period of 132 days of composting were studied. Results from TG, DTG and DSC curves obtained on inert atmosphere indicated that the cellulosic fraction present, despite the slow degradation during the composting process, is thermally less stable than other substances originated from that process. Due to that behavior, the cellulosic fraction decomposition could be kinetically evaluated through non-isothermal methods of analysis. The values obtained were: average activation energy, Ea=248, 257 and 259 kJ mol^-1 and pre- exponential factor, logA=21.4, 22.5, 22.7 min^-1, to the ST, SR and SM, respectively. From Ea and logA values and DSC curves, Málek procedure could be applied, suggesting that the SB (Šesták-Berggren) kinetic model is the appropriated one to the first thermal decomposition step. This revised version was published online in July 2006 with corrections to the Cover Date.     

Mechanism of the thermal decomposition of hydrophosphites of lithium,sodium and potassium

The thermal decomposition of some M ₂ ^I HPO₃ (M-Li, Na, K) phosphites under nitrogen atmosphere was investigated. A stepwise mechanism of thermal decomposition has been proposed.

---

Zusammenfassung Es wurde die thermische Zersetzung von Phosphiten M ₂ ^I HPO₃ (M-Li, Na, K) in Stickstoffatmosphere untersucht. Die Schritte des Mechanismus der thermischen Zersetzung wurden vorgeschlagen.

     

Synthesis and characterization of ran-copoly (p-phenylene sulfide sulfone/ketone)s

Random copoly(p-phenylene sulfide sulfone/ketone)s (PPSS/K) are prepared in high yield by the polycondensation of sodium hydrosulfide (NaSH) with bis(4-chlorophenyl) sulfone (BCPS) and 4,4′-dichlorobenzophenone (DCBP). The polymerization is conducted between 200–220°C, depending on the composition of the copolymer, and in the presence of water without any detrimental effects to the molecular weight. The copolymers with sulfone/ketone mole ratios (S : K) > 25 : 75 are amorphous, while the copolymers with S : K ratios ≤ 25 : 75 are crystalline. These materials form tough, creaseable films and exhibit a linear increase in the glass transition temperature with increasing sulfone content. Sulfuric acid solutions of the copolymers are dark orange to red and display an increasing λ_max in the uv-visible spectra as the S:K ratio of the copolymers decreases. © 1994 John Wiley & Sons, Inc.     

Titanium production in a plasma reactor: A feasibility investigation

The feasibility of producing titanium metal from titanium tetrachloride in a thermal plasma under equilibrium and adiabatic expansion conditions has been theoretically investigated. Free energy minimization and adiabatic expansion calculations to simulate a nozzle expansion were used to study the practicality of production. The crucial requirements for the production of titanium powder from TiCl₄ and H₂ appear to be rapid quenching of the plasma gas at high temperature (e.g., 3700 K) and appropriate reactant concentrations. Quenching of tire plasma gas and production of titanium powder can be achieved by adiabatic expansion through a nozzle. Preliminary experimental data indicate that titanium powder of approximately 5 nm in size can be produced in an argon plasma rising a nozzle expansion approach.     

p—Si上电沉积Ni—W—P薄膜的结构与热稳定性

研究了ｐ－Ｓｉ上恒电流沉积Ｎｉ－Ｗ－Ｐ合金薄膜组成与结构的关系，讨论了镀层的组成、结构随沉积时间的变化．测定了非晶合金的晶体结构随热处理温度的改变以及ＤＴＡ曲线，结果表明，非晶Ｎｉ－Ｗ－Ｐ合金在晶化过程中形成两个纳米超微晶相，非晶Ｎｉ－Ｗ－Ｐ薄膜的热稳定性远高于通常使用的非晶Ｎｉ－Ｐ薄膜．     

Synthesis, Structures, and Thermal Expansion of the La2W2−xMoxO9 Series

The La₂W_2−xMo_xO₉ series has been synthesized by the ceramic method. An alternative synthesis using microwave radiation is also reported. La₂W₂O₉ has two polymorphs and the low-temperature phase (α) transforms to the high-temperature form (β) at 1077°C. The influence of the W/Mo substitution in this phase transition has been investigated by DTA. The β structure for x≥0.7 compositions can be prepared as single phase at any cooling rate. The β phase for 0.3≤x≤0.7 compounds can be prepared as single phase by quenching, whereas a mixture of α and β phases is obtained by slow cooling. The W/Mo ratio in both coexisting phases is different with the β-phase having a higher Mo content. The x=0.1 and 0.2 compounds have been prepared as mixtures of phases. The room temperature structure of β-La₂W_1.7Mo_0.3O₉ has been analyzed by the Rietveld method in P2₁3 space group. The final R-factors were R_WP=9.0% and R_F=5.6% with a structure similar to that of β-La₂Mo₂O₉. Finally, the thermal expansion of both types of structures has been determined from a thermodiffractometric study. The thermal expansion coefficients were 2.9×10⁻⁶ and 9.7×10⁻⁶°C⁻¹ for α-La₂W₂O₉ and β-La₂W_1.2Mo_0.8O₉, respectively.     

Effect of substituents (NH2, OH, F) on structures and stability of lithofluorosilylenoids

Isomeric structures and energies of three kinds of lithofluorosilylenoids, R₂SiLiF (R = NH₂, OH, F) were studied using theab initio molecular orbital theory. The calculations show that thermal stability of the three-membered ring structures of these three kinds of silylenoids decreases in the order of substituents NH₂ > OH > F because of the conjugation between NH₂, OH or F and Si atom. The interaction of substituents R with Li atom makes R₂SiLiF have a structure with two Li-A-Si-F (A = N, O, F) four-membered rings, which is the most stable of the isomers of each of three kinds of silylenoids and whose stability decreases in the order of substituents F > OH > NH₂. Inductive effect of substituents influences the thermal stability of the linear structure of silylenoids.