Whitehead test modules

A (right -) module is said to be a Whitehead test module for projectivity (shortly: a p-test module) provided for each module , implies is projective. Dually, i-test modules are defined. For example, is a p-test abelian group iff each Whitehead group is free. Our first main result says that if is a right hereditary non-right perfect ring, then the existence of p-test modules is independent of ZFC + GCH. On the other hand, for any ring , there is a proper class of i-test modules. Dually, there is a proper class of p-test modules over any right perfect ring.

A non-semisimple ring is said to be fully saturated (-saturated) provided that all non-projective (-generated non-projective) modules are i-test. We show that classification of saturated rings can be reduced to the indecomposable ones. Indecomposable 1-saturated rings fall into two classes: type I, where all simple modules are isomorphic, and type II, the others. Our second main result gives a complete characterization of rings of type II as certain generalized upper triangular matrix rings, . The four parameters involved here are skew-fields and , and natural numbers . For rings of type I, we have several partial results: e.g. using a generalization of Bongartz Lemma, we show that it is consistent that each fully saturated ring of type I is a full matrix ring over a local quasi-Frobenius ring. In several recent papers, our results have been applied to Tilting Theory and to the Theory of -modules.

     

Wiener's test for space-time random walks and its applications

This paper establishes a criterion for whether a -dimensional random walk on the integer lattice visits a space-time subset infinitely often or not. It is a precise analogue of Wiener's test for regularity of a boundary point with respect to the classical Dirichlet problem. The test obtained is applied to strengthen the harder half of Kolmogorov's test for the random walk.

     

Estimation of Multinomial Probabilities under a Model Constraint

In this paper estimation of the probabilities of a multinomial distribution has been studied. The five estimators considered are: unrestricted estimator (UE), restricted estimator (RE) (under model ), preliminary test estimator (PTE) based on a test of the model , shrinkage estimator (SE) and the positive-rule shrinkage estimator (PRSE). Asymptotic distributions of these estimators are given under Pitman alternatives and the asymptotic risk under a quadratic loss has been evaluated. The relative performance of the five estimators is then studied with respect to their asymptotic distributional risks (ADR). It is seen that neither of the preliminary test and shrinkage estimators dominates the other, though each fares well relative to the other estimators. However, the positive rule estimator is recommended for use for dimension 3 or more while the PTE is recommended for dimension less than 3.     

Spectrophotometric flow-injection determination of zinc in plant digests based on a spot test

A spot test was implemented in a flow-injection system for the spectrophotometric determination of zinc in digests of plant materials. It is based on the influence of Zn²⁺ on the oxidation rate of 1-naphthylethylenediamine (NED) by hexacyanoferrate(III) under acidic conditions. In order to control the precipitate formation and to maintain the resulting suspension, a micellar medium was established by adding Triton X-100. The proposed system handles about 65 samples per hour, meaning 72 μg NED and 9.0 mg K₃[Fe(CN)₆] per determination. Baseline drift is usually <0.01 absorbance per hour and the analytical signals for 0.5-2.5 mg l⁻¹ Zn range within ca. 0.07-0.45 absorbance. Linearity of the analytical curve is fair (r>0.999, n=6) and detection limit was estimated as 0.2 mg l⁻¹ Zn. Results are precise (R.S.D.<1%, n=10) and in agreement with flame atomic absorption spectrometry and with certified values of standard reference materials.     

The effect of interface deformation due to gravity on line tension measurement by the capillary rise in a conical tube

Much research has been done on line tension measurement and interpretation, and attempts have also been made to measure line tension with simple, cheap and reliable methods that do not require excessive sophistication. Of particular interest is the method of determining line tensions of solid–liquid–vapor systems from the capillary rise in a conical tube. This simple and relatively inexpensive method gives line tension values comparable to those reported in the literature obtained via highly sophisticated instruments or techniques such as the well known axisymmetric drop shape analysis technique. The absolute value of line tension obtained using the conical tube method and assuming a spherical liquid–vapor interface is larger but of the same order of magnitude (1 μJ m⁻¹) as that reported in the literature. A theoretical analysis presented herein shows that by including the deformation of the liquid–vapor interface due to gravity in the conical capillary analysis, the line tension value inferred from the experimental data is reduced by approximately 50% and compares better with values in the literature obtained using other sophisticated methods. Thus a relatively simple, cheap, accurate and reliable method of line tension measurement has been advanced.     

Surface tension measurements in the study of molecular complexes

Surface tension measurements can be used to investigate molecular complex formation in liquid solutions for strong and weak complexes. The association constant and epthalpy for triethylamine-iodine, hexamethylbenzene-tetracyanoethylene and ethanol-iodine in cyclohexane are 4·55×10³, 218 and 0.93M⁻¹ at 25° C and 12·5, 7·7 and 5·1 kcal/mol respectively. These values compare well with those reported in the literature by other methods.     

SHAPE MEMORY EFFECT OF PU IONOMERS WITH IONIC GROUPS ON HARD-SEGMENTS

SMPU （shape memory polyurethane） non-ionomers and ionomers, synthesized with poly（c-caprolactone） （PCL）, 4, 4＇-diphenylmethane diisocyanate （MDI）, 1,4-butanediol （BDO）, dimethylolpropionic acid （DMPA） were measured with cyclic tensile test and strain recovery test. The relations between the structure and shape memory effect of these two series were studied with respect to the ionic group content and the effect of neutralization. The resulting data indicate that, with the introduction of asymmetrical extender, the stress at 100% elongation is decreased for PU non-ionomer and ionomer series, especially lowered sharply for non-ionomer series; the fixation ratio of ionomer series is not affected obviously by the ionic group content; the total recovery ratio of ionomer series is decreased greatly. After sufficient relaxation time for samples stretched beforehand, the switching temperature is raised slightly, whereas the recovery ratio measured with strain recovery test method is lowered with increased DMPA content. The characterization with FT-IR, DSC, DMA elucidated that, the ordered hard domain of the two series is disrupted with the introduction of DMPA which causes more hard segments to dissolve in soft phase; ionic groups on hard segment enhance the cohesion between hard segments especially at high ionic group content and significantly facilitate the phase separation compared with the corresponding non-ionomer at moderate ionic group content.     

离子液体BMIBF4性质的研究

用最大气泡法和韦氏天平法, 在278.15～343.15 K范围内测定了离子液体BMIBF₄的表面张力和密度; 讨论了这个离子液体的体积性质和表面性质; 根据离子个头大又极不对称的特点, 提出了离子液体的空隙模型. 根据空隙模型计算的离子液体恒压热膨胀系数与实验值相比, 偏差在10%左右.     

Characterization of the Effects of Vanadium Traps in Cracking Catalysts by Imaging Secondary Ion Mass Spectrometry and Microactivity Test

The vanadium trapping effect of Mg and La containing additives in cracking catalyst contaminated with 2300 ppm Ni and 4700 ppm V has been analyzed by microactivity test (MAT) and imaging secondary ion mass spectrometry (SIMS). The results of SIMS imaging are consistent with cracking activity data and show that the La/spinel is a superior vanadium trap for the fluid catalytic cracking of hydrocarbons (FCC) operation. La/spinel serves as a dual function additive for both vanadium trap and SO_x removal. The optimum amount of La/spinel added to the cracking catalyst is about 15% by weight. This results in an increased catalytic activity, an increase in gasoline yield, and a decrease in coke and gas factors. The MgAl₂O₄ phase of Mg/Al₂O₃ additive is found capable of trapping vanadium while its MgO of Mg/Al₂O₃ phase can migrate to zeolite particles (the active component of the FCC catalyst) that, in turn, causes a decline in the activity of that catalyst.     

Complexation of an acrylic resin by tertiary amines: synthesis and characterisation of new binders for antifouling paints

Antifouling coatings are the most reliable way to prevent biofouling of immersed surfaces. As concerning the high toxicity of organotin paints, the tendency is the development of coatings, which do not present environmental risks. In this work, we prepare binders from modification of acrylic copolymers containing free carboxylic acid groups. Biocides chosen are tertiary ammonium salts; alkyl chain substituents with different length are considered. The chemical modifications of resins are carried out via a single step reaction. Modification extents are monitored through proton nuclear magnetic resonance and thermogravimetric analysis and the modified resins are characterised by Fourier transform infrared spectroscopy. The glass transition temperature of the acrylate systems is assessed by dynamical mechanical analysis (pin point method) and compared with data obtained by differential scanning calorimetry. The erosion and antifouling properties of the binders are followed during an exposure to marine environment by a visual observation.