Liquid crystalline guanidinium phenylalkoxybenzoates: towards room temperature liquid crystals via bending of the mesogenic core and the use of triflate counter ions

A series of guanidinium salts 1(C _n ) _m –4(C _n ) _m ?X bearing phenyl alkoxybenzoate cores have been synthesised and their mesomorphic properties have been investigated by polarising optical microscopy (POM), differential scanning calorimetry (DSC) and powder X-ray diffraction experiments (small-angle X-ray scattering and wide-angle X-ray scattering). While compounds 1(C₁₂)₁?X and 3(C₁₂)₁?X with one alkoxy chain showed smectic A (SmA) phases irrespective of the counter ion, compounds 1(C₁₂)₂?OTf and 3(C₁₂)₂?OTf with two alkoxy chains displayed SmA phases and the corresponding chlorides 1(C₁₂)₂?Cl and 3(C₁₂)₂?Cl displayed Col_h. Guanidinium salts 1(C _n )₃–4(C _n )₃?X with three alkoxy chains showed Col_h phases. Whereas the use of cyclic guanidinium head groups rather than acyclic ones had only a minor influence on the mesophase properties, melting points were significantly decreased by bent core units instead of linear core units. Replacement of chloride counterions by triflate lead to a further depression of the clearing points and shifted the mesophase towards room temperature.     

Synthesis and properties of new materials with banana-shaped achiral cores and chiral end groups

New chiral bent-core mesogens, derivatives of 1,3-phenylene bis[4-(alkanyloxyphenyliminomethyl)benzoate], were synthesized with variation of a substituent (X=F, Cl); their antiferroelectric properties are described. The mesomorphic and switching properties were characterized by differential scanning calorimetry, polarizing optical microscopy, triangular wave method, and X-ray diffractometry in the small and wide angle regions. The presence of chiral tails at the terminals of side wings in the bent-core molecules induced a decrease in transition temperature and formation of the switchable SmC* phase in the melt. In addition, the introduction of a lateral halogen substituent in the Schiff's base moiety prevented the regular stacking of the molecules, resulting in the formation of very complex optical textures. The smectic phase with F-substituted PBFDOB and Cl-substituted PBCDOB showed layer spacings of 39 and 38.5?Å, respectively, corresponding to the end-to-end distance of molecules with a bent conformation. Significantly, the smectic phases of PBFDOB and PBCDOB exhibited a period of 179.5 and 131?Å, respectively, compatible with a helical structure with periodicity about 4.6 and 3.4 times the layer spacings.     

New insights into the transitional behaviour of methyl-6-O-(n-dodecanoyl)-α-D-glucopyranoside using variable temperature FTIR spectroscopy and X-ray diffraction

The liquid crystalline behaviour of methyl-6-O-(n-dodecanoyl)-α-D-glucopyranoside, 1, has been characterised using X-ray diffraction and variable temperature Fourier transform infrared (FTIR spectroscopy). 1 exhibits a monotropic interdigitated smectic A phase consisting of bilayers in which the alkyl chains are overlapped. The crystal–isotropic transition is accompanied by a pronounced decrease in the strength of the hydrogen bonding network involving the sugar groups resulting in a marked change in the environment of the alkyl chains. The isotropic phase consists of disordered smectic-like domains stabilised via hydrogen bonding between the sugar groups. At the transition to the smectic A phase, a subtle change in hydrogen bonding is observed which is manifested by a change in the temperature dependence of the OH stretching peak position in the FTIR spectrum. On crystallisation, the strong hydrogen bonding network is re-established accompanied by a change in the conformational distribution of the alkyl chains. A model is proposed in which a combination of hydrogen bonding (enthalpic effects) and conformational arrangements (entropic effects) promotes initially the formation of smectic-like domains in the isotropic phase and subsequently stabilises the smectic A phase by inhibiting the microphase separation leading to the crystal phase.     

Photoinduced phase transitions

Employing actinic light to alter/stabilise a particular thermodynamic phase via the photo-isomerisation of the constituent molecules is an interesting tool to investigate soft matter from a new dimension. This article focuses on our recent results on several aspects of these non-equilibrium phase transitions, which are isothermal in nature. We specifically discuss (i) the influence of different parameters, such as confinement, applied electric field, pressure etc., on the dynamics associated with both the photochemical transition driving the equilibrium nematic to the non-equilibrium isotropic phase and the thermal back relaxation recovering the nematic phase, (ii) unique light-driven disorder–order transition in a reentrant system, (iii) dynamic self-assembly of the smectic A phase, which is stabilised only in the presence of actinic light, (iv) novel temperature-intensity phase diagrams and an example of primary and secondary photo-ferroelectric effects in an antiferroelectric smectic C system. These results highlight the fact that the actinic light can be used as a new tool to study phase transitions and the associated critical phenomena that could also bring about effects that are not seen in equilibrium situations.     

The effect of terminal chain modifications on the mesomorphic properties of 4,4′-disubstituted diphenyldiacetylenes

The typical sidewalls produced in the fabrication of protrusion electrodes are proposed to create a low voltage (4.5 V_rms) and high transmittance (93%) blue-phase liquid crystal display (BP-LCD). The tilted electrodes produce a strong horizontal electrical field that reduces the operating voltage considerably. The common problem of the ‘dead zones’ is solved by reflecting the light onto the electrodes. In order to estimate the phase retardation of the reflected light, a ray tracing simulation program for anisotropic mediums has been developed. The proposed device is more competitive than vertical field switching based BP-LCD and also, has the advantages of protruded in-plane-switching structures. These facts make this technology a potential candidate for the next generation of BP-LCDs.     

Synthesis,mesogenic and dielectric properties of fluorosubstituted isothiocyanatoterphenyls

The synthesis, mesomorphic and physical properties of 14 homologous series of laterally fluorinated 4?-alkyl-4-isothiocyanatoterphenyls were described. Influence of the number of fluorine atoms and their position in the terphenyl core on the phase transition temperatures, nematic range, dielectric and optic anisotropy as well as bulk viscosity were discussed. The compounds with the most optimal properties for formulation of nematic mixtures were selected, and mixture examples with low viscosity and medium or high birefringence were presented.     

Alignment of liquid crystals induced by a photopolymerized self‐assembled film

An alignment film derived from a photopolymerized self‐assembled film may be used to orient nematic liquid crystals after irradiating the film with linearly polarized UV (LPUV). A photosensitive cationic amphiphile was first synthesized containing two double bonds and which could be polymerized by UV. A layer‐by‐layer self‐assembled multilayer film was next prepared in an aqueous solution of the cationic amphiphile and poly(sodium 4‐styrenesulphonate); the UV‐Vis spectra showed that each layer of the LBL multilayer film was uniform. When the film was irradiated by LPUV, the photosensitive double bonds underwent [2+2] cycloaddition along the vector direction of LPUV. The polarized UV‐Vis absorption spectra also provided evidence that the film was anisotropic, i.e. the photopolymerization was along a certain direction. The anisotropic film was used as an alignment layer for nematic liquid crystals, and observations under a polarizing microscope indicated that the alignment of the liquid crystals was good, as expected, and that the orientation direction of the liquid crystals was always perpendicular to the electric vector of the irradiating LPUV.     

Catalytic solid substrate-room temperature phosphorimetry for the determination of trace As(V) based on oxidising reaction between hydrogen peroxide and fullerenol using tween-80 as sensitizer

A new catalytic solid substrate-room temperature phosphorimetry (SS-RTP) for the determination of trace arsenic(V) has been established. It is based on the fact that fullerenol (F-ol) emitted strong and stable room temperature phosphorescence (RTP) on nitric acid cellulose membrane (NCM) substrate. H₂O₂ could oxidise F-ol to cause the quenching of RTP. As(V) could catalyse H₂O₂ to oxidise F-ol and decrease the RTP signal of F-ol sharply. After adding tween-80 in the system, its ΔI _p enhanced 7.7 times compared with the without-tween-80 levels. Under the optimum conditions, the linear dynamic range of this method was 0.016?11.2 ag spot^?1 with a detection limit (LD) of 9.3 zg spot^?1 (corresponding concentration: 2.3 × 10^?17 g mL^?1). This sensitive, simple and selective method has been successfully applied to the determination of trace As(V) in human hair and tea samples. The reaction mechanism for SS-RTP is also discussed.     

The Effect of Temperature on GPC for the Separation of PCBs from Transformer Oil and Subsequent Analysis by GC-MSD

Abstract

The analysis of PCBs often involves lengthy and expensive cleanup procedures to remove interferences associated with environmental sample matrices. Gel permeation chromatography (GPC) has proven to be a useful tool in removing many of these interferences from environmental samples, especially from difficult matrices such as oils, lipids and sediments. This paper describes the effect of temperature upon the GPC column in separating PCBs from transformer oil and its implication on GC-MS analysis.     

Cationic polymerization of isobutylene at room temperature

This review highlights recent approaches toward polyisobutylene (PIB) by an energy efficient room temperature cationic polymerization. Special focus is laid on our own work using modified Lewis acids and nitrile‐ligated metal complexes associated with weakly coordinating anions. In both cases, suitable conditions have been found for efficient production of PIB characterized by medium to low molar masses and a high content of exo double bonds as end groups—the typical features of highly reactive PIB, an important commercial intermediate toward oil and gasoline additives. These and other approaches demonstrate that the cationic polymerization of isobutylene is still not fully explored, and new innovative catalyst systems can lead to surprising results of high commercial interest. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013