Dynamic fracture testing of polymethyl-methacrylate (PMMA) single-edge notched beam

Dynamic fracture in single-edge notched polymethyl-methacrylate (PMMA) beams have been investigated by three-point-bending impact testing with a drop-weight machine. A high-speed camera combined with the digital image correlation (DIC) method is used to capture the impact-induced crack initiation and propagation, as well as the beam deformation fields and the open mode strain at the original notch tip. The crack propagation length is recorded and the instantaneous crack velocity is calculated. Furthermore, the dynamic fracture toughness K_Id is quantified from the loading-displacement relations at different impact velocities. The effects of the impact velocity and impact energy on dynamic fracture toughness, fracture initiation strain, as well as the corresponding influences on the fracture propagation velocity, are discussed.     

含中心裂纹梯度纳晶金属的数值模拟

梯度纳晶金属由于其微观组织的梯度分布,力学属性也呈现梯度变化,这使得其表现出不同于传统均匀材料的断裂行为．利用材料力学参数的梯度分布来表征梯度纳晶金属中晶粒尺寸的梯度变化,并编写ABAQUS和MATLAB脚本程序建立分层有限元模型．通过数值模拟计算了含有初始中心裂纹的梯度纳晶金属在受远端均匀拉应力作用下的裂尖J积分,分别研究了屈服应力梯度、裂纹角度和裂纹长度对金属材料断裂韧性的影响,并与传统粗晶进行了对比．结果表明梯度纳米结构的存在导致梯度纳晶金属内部的中心裂纹两端表现出不同的断裂韧性,小晶粒一侧裂尖的抗裂韧性优于大晶粒一侧裂尖,且屈服应力梯度绝对值越大,两者差距越大．梯度纳晶金属的断裂韧性受中心裂纹角度和长度变化的影响与传统粗晶金属基本一致,同时在晶粒尺寸梯度的作用下梯度纳晶的裂尖J积分略低于粗晶,即整体上拥有更好的抗裂韧性．     

高韧性合金钢断裂韧性及疲劳裂纹扩展门槛值的联合试验方法

在柴油机曲轴、连杆等关键零部件的可靠性设计和失效评估中,断裂韧性及疲劳裂纹扩展门槛值分别是衡量材料抵抗裂纹失稳扩展和裂纹开始扩展的重要指标．但是,对于高韧性合金材料,难以通过常规试验所推荐的厚度确定平面应变断裂韧性,而门槛值的测定通常不但非常耗时,且难以直接应用于不同循环特性的实际结构．本文针对高韧性合金钢34CrNi3MoA,提出一种将断裂韧性和疲劳裂纹扩展门槛值试验合二为一的试验方法,即用同一个试件可以同时测定门槛值和断裂韧性．利用断裂韧性关于试件厚度的渐近特性,以几种较薄试件的试验,确定平面应变状态下的断裂韧性．试验结果还表明,裂纹扩展门槛值的试件厚度依存性可以忽略,并给出了任意循环特性（应力比）下的门槛值计算公式．     

Simulation of proppant transport at intersection of hydraulic fracture and natural fracture of wellbores using CFD-DEM

Proppants transport is an advanced technique to improve the hydraulic fracture phenomenon, in order to promote the versatility of gas/oil reservoirs. A numerical simulation of proppants transport at both hydraulic fracture (HF) and natural fracture (NF) intersection is performed to provide a better understanding of key factors which cause, or contribute to proppants transport in HF–NF intersection. Computational fluid dynamics (CFD) in association with discrete element method (DEM) is used to model the complex interactions between proppant particles, host fluid medium and fractured walls. The effect of non-spherical geometry of particles is considered in this model, using the multi-sphere method. All interaction forces between fluid flow and particles are considered in the computational model. Moreover, the interactions of particle–particle and particle–wall are taken into account via Hertz–Mindlin model. The results of the CFD-DEM simulations are compared to the experimental data. It is found that the CFD-DEM simulation is capable of predicting proppant transport and deposition quality at intersections which are in agreement with experimental data. The results indicate that the HF–NF intersection type, fluid velocity and NF aperture affect the quality of blockage occurrence, presenting a new index, called the blockage coefficient which indicates the severity of the blockage.     

基于FDM-DEM耦合的冲击损伤大理岩静态断裂力学特征研究

为探究循环冲击损伤后大理岩的静态断裂力学特征,基于有限差分（finite difference method,FDM）-离散元（discrete element method,DEM）耦合的建模技术构建了三维分离式霍普金森压杆（split Hopkinson pressure bar,SHPB）数值模型,其中杆件系统和岩石试件分别采用FLAC3D和PFC3D程序建模。利用该模型对中心直切槽半圆盘（NSCB）试样进行了恒定子弹速度下的循环冲击,随后对受损试样进行静态三点弯曲断裂实验。通过编写Fish程序,提取试样断裂面数据,对断裂面进行重构并定量计算表面粗糙度。通过与相关室内实验结果的对比分析,验证了本文数值分析的合理性与可靠性。模拟结果表明,随着循环冲击次数的增加,试样内部微裂纹、破碎颗粒均增加。连接力场分布混乱,部分力链发生断裂。力链的变化是试样力学性能劣化的根本原因。在静态三点弯曲断裂实验中,冲击5次后试样的静态断裂韧度较天然试样产生一定程度的降低。试样在静载过程中产生的微裂纹和碎块的数量随循环冲击次数的增加而增加,断裂面粗糙度随循环冲击次数的增加而增加。     

基于离散元的杆件断裂全过程数值模拟

杆件的断裂会涉及到大变形、非线性以及不连续等问题,通常的数值计算方法模拟这种复杂力学行为具有局限性。本文基于颗粒离散元法DEM,将接触粘结处的分布式弹簧用梁纤维进行等效,提出了一种适于结构弹塑性分析的DEM纤维梁模型,然后在此基础上构建了构件断裂模拟算法以及纤维破环准则。将该模型应用于悬臂梁结构,模拟了悬臂梁从弹性到弹塑性阶段,再到断裂破坏的全过程,数值模拟得到的结构响应和截面开裂破坏形态均较合理。最后将该方法应用于单层网壳倒塌破坏模拟,并与网壳振动台倒塌试验进行对比,结果表明,数值模拟得到的杆件断裂过程及结构倒塌模式与试验现象一致,验证了该模型的正确性和适用性。     

老年髋部骨折患者血清中宏量及微量元素含量分析

为探讨微量元素与骨质疏松症及髋部骨折的关系,采用原子吸收分光光度计等方法分别测定了40例老年髋部骨折患者血清中微量元素铜(Cu)、锌(Zn)、硒(Se)、铁(Fe)、锰(Mn)及宏量元素钙(Ca)、磷(P)、镁(Mg)、钾(K)、钠(Na)的含量,并与30例青壮年髋部骨折患者对照。结果表明,老年髋部骨折患者血清中的Ca含量明显升高(P<0.01)、Cu、Mn有显著提高(P<0.05),其它元素有升高趋势,但无显著性差异,Zn的含量明显降低(P<0.01)。测定血清中宏量及微量元素含量可能对预测髋部骨折及骨质疏松症的疗效评价有一定临床价值。     

钽的层裂实验数值模拟

 采用连续介质力学基唯象模型模拟分析了钽的平板撞击层裂行为。该模型包括了材料的非线性弹性（状态方程）、率相关塑性和孔洞的形核及生长等多种效应,并且采用一种对角隐式Runge-Kutta方法来求解本构率方程组,提高了热粘塑性本构关系计算的稳定性及精度。将数值模拟结果和相关实验数据进行了对比分析,结果表明,对于样品中的拉应力峰值明显高于材料层裂强度的实验（中、高速平板撞击实验）,理论模型具有较好的预估能力,但对于临界层裂问题（低速平板撞击实验）,该模型对材料损伤与失效过程的描述可能不够准确,需要进一步改进。     

相干梯度敏感干涉测量技术及在静态断裂力学实验中的应用

介绍了相干梯度敏感(CGS)干涉测量技术的基本原理及其在静态Ⅰ型断裂实验中的应用,验证了该方法对裂纹尖端局部变形场和断裂特性进行定量研究的可行性。给出了代表静态Ⅰ型裂纹尖端奇异场光力学信息的CGS控制方程,模拟并分析了Ⅰ型裂纹尖端的CGS条纹模式,对静态Ⅰ型裂纹尖端变形场和断裂特性进行了三点弯曲的CGS试验,并提取了应力强度因子KⅠ。结果表明,试验结果与理论分析结果相吻合。     

Studies on the syntheses of polymetalloxanes and their properties as a precursor for amorphous oxide. IV. Properties of SiO2–TiO2 oxide fibers from polytitanosiloxane

From polytitanosiloxanes (PTS), SiO₂–TiO₂ oxide fibers with fairly good tensile strength were prepared, and their mechanical and thermal properties were investigated. The precursor fibers PTS-0.5 and PTS-1.0 were obtained by dry spinning of a highly viscous PTS solution which were formed as the reaction mixture of silicic acid (SA) with bis(2,4-pentanedionato)titanium diisopropoxide (PTP) in the molar ratios (SA/PTP) of 0.5 and 1.0. The precursor fibers PTS-0.5 were too brittle to measure their tensile strength, whereas PTS-1.0 and the heat-treated fibers were found to have tensile strength of 130 (precursor), 540 (500°C), and 450 (900°C) MPa, respectively. Heat-treatment of the fibers PTS-1.0 at above 1000°C forms anatase and rutile of titanium dioxide. The crystallization is resulted from the unreacted PTP which is not incorporated into the polymer network.