钕玻璃的热致断裂及泵浦极限

以激光介质的第一主应力为评判标准,依据Griffith微裂纹理论作为断裂临界应力,基于已报道的断裂实验数据和3维、瞬态的有限元计算,建立了预测一定泵浦参数下钕玻璃断裂可能性的Weibull统计模型,同时分析了影响介质泵浦极限的其它因素。结果表明:材料的抛光工艺决定了介质的断裂应力;对于短脉冲大能量方式工作的钕玻璃介质,基于美国2 0世纪9 0年代的抛光水平,1 Hz以下低重频时应优先考虑18 kW.cm-2的泵浦饱和极限,10 Hz以上高重频时应优先考虑介质的断裂极限。     

In-Situ Intrinsic Interface Strength Measurement at Elevated Temperatures and its Relationship to Interfacial Structure

A previously developed laser spallation technique has been modified to measure the tensile strength of thin film interfaces in-situ at temperatures up to 1100°C. Tensile strengths of Nb/A-plane sapphire, FeCrAl/A-plane sapphire and FeCrAlY/A-plane sapphire were measured up to 950°C. The measured strengths at high temperatures were substantially lower compared with their corresponding strengths at ambient temperature. For example, at 850°C, the interface tensile strength for the Nb/sapphire (151 ± 17 MPa), FeCrAl/sapphire (62 ± 8 MPa) and FeCrAlY/sapphire (82 ± 11 MPa) interface systems were lower by factors of approximately, 3, 5, and 8, respectively, over their corresponding ambient values. These results underscore the importance of using such in-situ measured values under operating conditions as the failure criterion in any life prediction or reliability models of such coated systems where local interface temperature excursions are expected. The results on alloy film interfaces also demonstrate that the presence of Y increases the strength of FeCrAl/Al₂O₃ interfaces.     

钽的层裂实验数值模拟

 采用连续介质力学基唯象模型模拟分析了钽的平板撞击层裂行为。该模型包括了材料的非线性弹性（状态方程）、率相关塑性和孔洞的形核及生长等多种效应,并且采用一种对角隐式Runge-Kutta方法来求解本构率方程组,提高了热粘塑性本构关系计算的稳定性及精度。将数值模拟结果和相关实验数据进行了对比分析,结果表明,对于样品中的拉应力峰值明显高于材料层裂强度的实验（中、高速平板撞击实验）,理论模型具有较好的预估能力,但对于临界层裂问题（低速平板撞击实验）,该模型对材料损伤与失效过程的描述可能不够准确,需要进一步改进。     

Mechanical Characterization Measurement of Polymer Material under Stress by Birefringence Microscope

Some polymer materials under tensile stress provide us interesting information. Internal structure changes of polymer materials must be observed by external stress. Birefringence shows the orientation characteristic in molecular orientation. A microscopic measurement system for birefringence distribution is proposed to analyze the relation between applied stress and birefringence distribution of an internal structure. Birefringence distributions of gelatin such as phase difference and azimuthal angle are shown in cases of loading and unloading stress as a demonstration. The phase difference increased nonlinearly with each process, and change of birefringence in the elastic domain was different from that in the plastic domain.     

Selective role of bainitic lath boundary in influencing slip systems and consequent deformation mechanisms and delamination in high-strength low-alloy steel

We elucidate here the deformation behaviour and delamination phenomenon in a high-strength low-alloy bainitic steel, in terms of microstructure, texture and stress evolution during deformation via in situ electron back-scattered diffraction and electron microscopy. Furthermore, the selective role of bainitic lath boundary on slip systems was studied in terms of dislocation pile-up and grain boundary energy models. During tensile deformation, the texture evolution was concentrated at {1 1 0}<1 1 1> and the laths were turn parallel to loading direction. The determining role of lath on the deformation behaviour is governed by length/thickness (l/t) ratio. When l/t > 28, the strain accommodates along the bainite lath rather than along the normal direction. The delamination crack initiated normal to (0 1 1) plane, and become inclined to (0 1 1) plane with continued strain along (0 1 1) plane and lath plane. This indicated that the delamination is not brittle process but plastic process. The lack of dimples at the delaminated surface is because of lack of strain normal to the direction of lath. The delaminated (0 1 1) planes were associated with cleavage along the (1 0 0) plane.     

改进的孔隙模型评价流体性质与裂缝孔隙度

随着勘探开发的不断深入,渤海油田面临越来越多的疑难储层,这类储层流体性质识别与裂缝孔隙度评价成为测井评价的难点。本文依据Biot理论,描述了存在裂隙条件下的含裂隙Biot理论,形成改进的孔隙介质模型。根据该模型利用阵列声波测井数据进行反演得到裂缝孔隙度,同时通过流体置换,得到不同流体对应的岩石体积模量,对其进行交会判别流体性质,实现了阵列声波测井裂缝孔隙度定量评价与流体性质识别综合应用。利用该模型对渤海油田十几口井进行计算,结果表明该方法对于常规砂泥岩和复杂岩性储层均能取得较好效果,本文提出的储层流体性质识别与裂缝孔隙度评价方法,有助于扩展阵列声声波测井的应用范围。     

单晶ZnO、TiO_2纳米线拉伸力学特性的分子动力学研究

采用分子动力学方法,模拟了不同加载速度、不同温度下单晶ZnO、TiO_2纳米线的拉伸破坏过程.通过模拟结果,对比、分析了两种单晶金属氧化物纳米线拉伸力学特性的差异.研究表明,1)ZnO纳米线的断裂机制为:表面微裂纹-微孔-微裂纹与微孔贯穿-断裂,而TiO_2纳米线的断裂机制为:局部屈服-颈缩-断裂;2)TiO_2纳米线的承载能力优于ZnO纳米线,而承受变形的能力劣于ZnO纳米线;3)温度较低的情况下,纳米线的抗拉性能较好;加载速度越高,纳米线的抗载性能越好,而抗变形能力越差.     

Pinning of cracks in two-dimensional disordered media

We study the statistics of crack pinning in two dimensions by experiments and simulations of directed polymers in random media. Mode I tensile tests on paper samples show a delocalization phenomenon as the notch length is varied if the fraction of cracks pinned to the notch is monitored. This is compared with the behavior of directed polymers in the presence of both an energetically favorable localized pinning center and bulk disorder. An analysis of the crack interface roughness indicates self-affine behavior with a roughness exponent ζ in the proximity of the minimum energy surface value 2/3. Received 4 April 2000 and Received in final form 10 October 2000     

镁合金空心螺钉内固定治疗股骨颈骨折的有限元分析研究

利用有限元分析方法探究镁合金空心螺钉内固定治疗股骨颈骨折的生物力学特性, 旨在为临床治疗股骨颈骨折提供一种新的思路. 选取一例青年健康志愿者的下肢CT数据建立股骨三维模型, 在Mimics插件3-matic中建立股骨网格并赋予网格材料属性, 利用Solidworks 17.0软件建立空心螺钉模型, 将上述2个三维模型导入Workbench 2020软件中, 分别赋予空心螺钉镁合金、钛合金材料属性, 进行对比分析, 记录股骨及空心螺钉的峰值、应力分布值和股骨位移. 结果表明, 钛合金螺钉内固定模型最大应力为357.27MPa, 最大位移为0.034mm; 镁合金螺钉内固定模型最大应力为311.27MPa, 最大位移为0.034mm; 2组不同材料的空心钉结果数值差异不大. 研究表明镁合金空心螺钉和传统钛合金空心螺钉力学性能相似, 且镁合金更加亲和人体, 在临床方面可以镁合金空心螺钉代替钛合金空心螺钉治疗股骨颈骨折.     

髋臼四方区解剖型自锁定钢板的数字技术设计

为探讨使用数字技术设计新型髋臼四方区自锁定解剖型钢板, 采集宁波市第六医院影像科2020年1月至2020年12月, 25~50岁正常男女骨盆CT数据, 选择中位数的骨盆CT作为模型. 将CT数据依次导入Mimics 21.0软件和Unigraphics NX软件, 生成三维骨盆模型. 用CAD软件画出钢板螺钉dwg格式二维图像后导入Unigraphics NX软件, 建立stl格式钢板螺钉三维模型, 设计钢板厚2.0~3.0mm, 实心皮质骨螺钉Ф3.5/5.5mm. 在三维空间视图中, 将钢板螺钉装配到骨盆模型, 重点观察三维透视图、钉道纵轴切面图、螺钉与钢板的锁定角度, 校对功能固定区、定位孔、阻挡孔、固定孔、应力桥、滑动槽等指标, 优化钢板形态和螺钉钉道, 一块钢板同时固定髋臼四方区、臼顶负重区、前后柱、前后壁. stl格式数据输出至打印机, 3D打印钢板, 装配到骨盆模型, 校对钢板与骨盆的匹配度, 确定最优化的图像数据. 根据患者骨盆CT导出的数据, 用Unigraphics NX软件建立三维骨盆模型, 可灵活设计钢板螺钉, 精度达到0.2mm, 即刻修改钢板螺钉形态数据, 虚拟内固定. 数字技术设计不再需要手工标本测量和CT图像测量, 可提高新型内固定装置的设计效率, 为个性化骨科内植物设计、精准固定手术提供了新路径.