基于模糊PID的海洋立管疲劳试验装置控制系统设计

海洋立管作为海洋油气开发的关键设备,在运行期间面临疲劳失效的风险,需要对立管进行疲劳试验。针对海洋立管共振弯曲疲劳试验法,提出基于 S7-300 PLC实现海洋立管共振弯曲疲劳试验装置控制系统的设计思想。采用黄金分割法,寻找确定试件共振频率点;同时,为保障系统能够在该共振频率点稳定运行,采用S7-300 PLC作为核心控制器,结合参数自调节模糊PID控制算法,设计完成疲劳试验装置中转速模糊PID控制器,实现对系统转速的精确控制,使得海洋立管疲劳试验装置控制系统在具有PLC控制灵活、可靠性高等特点的同时,大大提高了其自动化程度。     

制导光缆中光纤寿命预期

介绍了光纤寿命预期的疲劳实验方法和筛选实验方法。采用这两种方法，利用电子万能材料试验机和光纤筛选复绕机对室温下光纤进行了疲劳性能实验。实验得出，在张力小于850g的情况下，制导光纤的寿命可以达到10年以上；光纤的韦伯参数md和疲劳参数nd的大小影响光纤寿命。实验表明，当光纤的使用状态受力较大时，或使用贮存状态相差较大时，宜选用动态方法进行寿命预期；当贮存和使用状态受力变化不大时，宜选用筛选复绕方法预期光纤寿命。制导光纤寿命模型宜选用动态疲劳模型，通信光纤可选用筛选实验模型。实验还表明，提高光纤的抗疲劳因子nd和减小光缆中光纤的应变，可以更好地保持光缆中光纤的使用寿命和可靠性。     

Great enhancement in remnant polarization of SrBi4Ti4O15 thin films by A-site doping of Fe3+ ions

SrBi4-xFexTi4O15 (SBFT-x) thin films (x = 0.00, 0.05, 0.08, 0.15) have been synthesized on Pt/Ti/SiO2/Si (100) substrates by sol-gel method. This paper finds that Fe-doping does not change the crystal structure of SrBi4Ti4O15 (SBTi). The coercive filed (Ec) and remnant polarisation (Pr) increase at first, then decrease with the increase of Fe doping content. At a maximum applied field of 229 kV/cm, the 2Pr reaches a maximum value of 91.1 μC/cm2 at x = 0.05 and the corresponding Ec is 72 kV/cm. The 2Pr increases by about 260% and the Ec decreases by about 6%, respectively. Obviously, the ferroelectric property of SrBi4Ti4O15 is greatly enhanced by Fe doping. The fatigue-endurance characteristic of the SBFT-0.05 is not improved. After 1.1×109 read/write cycles at a frequency of 50 kHz, the nonvolatile polarisations (Pnv = P*-P∧) decreased about 48% of its initial value.     

Mechanical Characterization Measurement of Polymer Material under Stress by Birefringence Microscope

Some polymer materials under tensile stress provide us interesting information. Internal structure changes of polymer materials must be observed by external stress. Birefringence shows the orientation characteristic in molecular orientation. A microscopic measurement system for birefringence distribution is proposed to analyze the relation between applied stress and birefringence distribution of an internal structure. Birefringence distributions of gelatin such as phase difference and azimuthal angle are shown in cases of loading and unloading stress as a demonstration. The phase difference increased nonlinearly with each process, and change of birefringence in the elastic domain was different from that in the plastic domain.     

单晶ZnO、TiO_2纳米线拉伸力学特性的分子动力学研究

采用分子动力学方法,模拟了不同加载速度、不同温度下单晶ZnO、TiO_2纳米线的拉伸破坏过程.通过模拟结果,对比、分析了两种单晶金属氧化物纳米线拉伸力学特性的差异.研究表明,1)ZnO纳米线的断裂机制为:表面微裂纹-微孔-微裂纹与微孔贯穿-断裂,而TiO_2纳米线的断裂机制为:局部屈服-颈缩-断裂;2)TiO_2纳米线的承载能力优于ZnO纳米线,而承受变形的能力劣于ZnO纳米线;3)温度较低的情况下,纳米线的抗拉性能较好;加载速度越高,纳米线的抗载性能越好,而抗变形能力越差.     

Pinning of cracks in two-dimensional disordered media

We study the statistics of crack pinning in two dimensions by experiments and simulations of directed polymers in random media. Mode I tensile tests on paper samples show a delocalization phenomenon as the notch length is varied if the fraction of cracks pinned to the notch is monitored. This is compared with the behavior of directed polymers in the presence of both an energetically favorable localized pinning center and bulk disorder. An analysis of the crack interface roughness indicates self-affine behavior with a roughness exponent ζ in the proximity of the minimum energy surface value 2/3. Received 4 April 2000 and Received in final form 10 October 2000     

Self-healing slip pulses and the friction of gelatin gels

We present an extensive experimental study and scaling analysis of friction of gelatin gels on glass. At low driving velocities, sliding occurs via propagation of periodic self-healing slip pulses whose velocity is limited by collective diffusion of the gel network. Healing can be attributed to a frictional instability occurring at the slip velocity V = V _c. For V > V _c, sliding is homogeneous and friction is ruled by the shear-thinning rheology of an interfacial layer of thickness of order the (nanometric) mesh size, containing a solution of polymer chain ends hanging from the network. In spite of its high degree of confinement, the rheology of this system does not differ qualitatively from known bulk ones. The observed ageing of the static friction threshold reveals the slow increase of adhesive bonding between chain ends and glass. Such structural ageing is compatible with the existence of a velocity-weakening regime at velocities smaller than V _c, hence with the existence of the healing instability. Received: 7 March 2003 / Accepted: 2 May 2003 / Published online: 11 June 2003 RID="b" ID="b"e-mail: ronsin@gps.jussieu.fr     

Notch fatigue of Cu_(50)Zr_(50) metallic glasses under cyclic loading: molecular dynamics simulations

Molecular dynamics simulation is performed to simulate the tension–compression fatigue of notched metallic glasses(MGs), and the notch effect of MGs is explored. The notches will accelerate the accumulation of shear transition zones, leading to faster shear banding around the notches' root causing it to undergo severe plastic deformation. Furthermore, a qualitative investigation of the notched MGs demonstrates that fatigue life gradually becomes shorter with the increase in sharpness until it reaches a critical scale. The fatigue performance of blunt notches is stronger than that of sharp notches. Making the notches blunter can improve the fatigue life of MGs.     

Reliability analysis of stochastic structural system considering static strength, stiffness and fatigue

Multi-failures are possible to appear in the process of using the structural system, such as dead load failure, fatigue failure and stiffness failure. The expression of residual resistance is given based on the impact of random crack propagation in- duced by the fatigue load on the critical limit stress and section modulus in this paper. The failure modes of every element of the structural system are analyzed under dead and fatigue loads, and the influence of the correlation of failure modes on reliability of the element is considered. Failure mechanism and the correlation of failure modes under dead and fatigue loads are discussed, and the method of reli- ability analysis considering static strength, fatigue and stiffness is given. A nu- merical example is analyzed, which indicates that the failure probability is different for different use life and the influence of dead and fatigue loads on reliability of the structural system is different as well. This method of reliability analysis, in the pa- per, is better than the method only considering a single factor (or static strength, or fatigue, or stiffness, etc.) in the case of practical engineering.     

Fatigue damage behavior of a surface-mount electronic package under different cyclic applied loads

This paper studies and compares the effects of pull-pull and 3-point bending cyclic loadings on the mechanical fa- tigue damage behaviors of a solder joint in a surface-mount electronic package. The comparisons are based on experimental investigations using scanning electron microscopy （SEM） in-situ technology and nonlinear finite element modeling, respec- tively. The compared results indicate that there are different threshold levels of plastic strain for the initial damage of solder joints under two cyclic applied loads; meanwhile, fatigue crack initiation occurs at different locations, and the accumulation of equivalent plastic strain determines the trend and direction of fatigue crack propagation. In addition, simulation results of the fatigue damage process of solder joints considering a constitutive model of damage initiation criteria for ductile materials and damage evolution based on accumulating inelastic hysteresis energy are identical to the experimental results. The actual fatigue life of the solder joint is almost the same and demonstrates that the FE modeling used in this study can provide an accurate prediction of solder joint fatigue failure.