用云纹干涉法测量和研究双层钴合金的挠度

运用云纹干涉原理对双层钴-合金材料进行三点弯曲试验,测试其常温与高温条件下的挠度值.通过大量试验,且与千分表测试的挠度值进行比较.结果表明,常温条件下的云纹测试挠度值与千分表法可以达到同样的精确度.同时,该实验方法体现了高温云纹干涉法在材料高温力学性能测试方面的优越性.高温云纹法是非接触式测量,在高温环境下有效地解决了量具高温变形的困难,且结合云纹图像可以对试件受力动态变形情况进行实时观测和分析,是一种较为精确测试常温及高温挠度的新方法.     

Hole-drilling method using grating rosette and Moiré interferometry

The hole-drilling method is one of the most wellknown methods for measuring residual stresses. To identify unknown plane stresses in a specimen, a circular hole is first drilled in the infinite plate under plane stress, then the strains resulting from the hole drilling is measured. The strains may be acquired from interpreting the Moire signature around the hole. In crossed grating Moire interferometry, the horizontal and vertical displacement fields （u and v） can be obtained to determinate two strain fields and one shearing strain field. In this paper, by means of Moire interferometry and three directions grating （grating rosette） developed by the authors, three displacement fields （u, v and s） are obtained to acquire three strain fields. As a practical application, the hole-drilling method is adopted to measure the relief strains for aluminum and fiber reinforced composite. It is a step by step method; in each step a single laminate or equivalent depth is drilled to find some relationships between the drilling depth and the residual strains relieved in the fiber reinforced composite materials.     

应用数字散斑相关技术研究缺口根部高温疲劳变形

应用数字散斑相关技术研究了耐热合金试件在450°环境中缺口根部的弹塑性变形及其与疲劳循环次数的相关性。疲劳试验在单边带缺口的拉伸板状试件上进行。试件由耐热合金GH4169材料制成,试件表面预先通过离子溅射法制作了离散的金粒散斑图。试验采用逐级循环加载和疲劳循环加载交替的方式进行。首先进行逐级循环加载,将最大载荷Pmax平均分成8级,由0逐级加载至最大载荷,再由最大载荷逐级卸载至0;同时由图像系统半自动地、连续同步地采集系列散斑图。然后按0→Pmax→0加载方式,连续进行250次疲劳循环加载。逐级循环加载和疲劳循环加载不断交替,直至疲劳断裂。利用数字散斑相关技术计算出缺口根部的弹塑性应变,进而求出缺口根部应变、名义迟滞回线面积及斜率与疲劳循环次擞的相关性。试验结果对于耐热合金材料的疲劳寿命研究很有意义。     

四次正多项式的正分解

研究次数为4的符号正多项式的正分解问题,得出四次正多项式分解为一次和三次正多项式乘积的充要条件．     

环形光纤激光器自混合散斑数值模拟及频谱性能分析

在环形激光器的理论基础上,结合环形掺铒光纤激光器自混合散斑速度传感实验系统,数值模拟了激光器自混合散斑信号的功率输出.分析了自混合散斑信号的平均散斑频率,频谱能量密度性能.研究结果表明,频谱平均频率与物体速度成近似的线性关系,频谱能量密度与探测距离成近似线性关系.     

Minimizing sequences of variational problems with small parameters

A class of variational problems with small parameters is studied. Their zeroth-order asymptotic solutions are constructed. It is shown that the zeroth-order asymptotic solution is just the minimizing sequence of variational problems as the small parameter approaches to zero.     

孔周弹塑性变形与疲劳循环次数的相关性

应用白光散斑相关技术研究了孔周弹塑性变形与疲劳循环次数的相关性,以便探索疲劳寿命的预测方法.疲劳实验在单边带缺口的拉伸板状试件上进行,试件由GH4169材料制成,试件表面上喷涂了白光散斑图.疲劳加载采用0→Pmax→0的循环加载方式,加载波形为正弦波,加载频率为10Hz.实验中,按一定的疲劳循环周次在零载及最大载荷两种状态下停机、采图.应用数字图像相关技术求出孔周附近的残余位移场,并应用逐点最小二乘法求出应变场.实验中获得了一些对于疲劳寿命研究很有意义的结果.     

离散交换群上Toeplitz算子代数的一个正合列

在引进几乎不变子集的基础上定义一般的离散交换群上的广义Toeplitz算子,研究该算子的一些性质,得到了几乎不变子集的一个刻画以及由该广义Toeplitz算子生成的C*-代数的一个正合序列。     

Effects of Sequence on Transmission Properties of DNA Molecules

A double helix model of charge transport in DNA molecule is given and the transmission spectra of four DNA sequences are obtained. The calculated results show that the transmission characteristics of DNA are not only related to the longitudinal transport but also to the transverse transport of molecule. The periodic sequence with the same composition has stronger conduction ability. With the increasing of bases composition, the conductive ability reduces, but the weight of θ direction rises in charge transfer.     

基于多通道滤波技术的散斑条纹图正则化方法

在光测力学中,条纹图正则化是进一步提取条纹位相信息的重要基础。对于散斑条纹图来说,正则化的过程还需能够有效地抑制散斑噪声。本文提出一种基于多通道滤波技术的散斑条纹图正则化方法。通过使用多个Gabor滤波通道对散斑条纹图进行滤波,并且引入与条纹对比度有关的权重因子把各个滤波通道的滤波结果叠加起来,最终得到滤除了散斑噪声的正则化条纹图。数值模拟和实验结果表明,该方法在将散斑条纹图正则化的同时能够有效地滤除条纹图中的散斑噪声,为进一步提取条纹位相奠定了良好的基础。