Subsurface layers with degenerate hole gas arising in germanium immersed into liquid helium under 60Co-gamma irradiation

Abstract

The subsurface layers with quasi-metal hole conductivity have been observed in n- and p-Ge immersed into liquid He under the ⁶⁰Co-gamma-irradiation. three conditions are to be fulfilled simultaneously for the production of the layers: low temperature, direct contact between helium and germanium and gammairradiation.     

Facile synthesis of pH‐responsive glycopolypeptides with adjustable sugar density

Well‐defined pH‐responsive glycopolypeptides were prepared by polymer‐analogous aqueous amide coupling of d ‐glucosamine to poly(α,l ‐glutamic acid) (PGA) using the coupling agent 4‐(4,6‐dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium chloride (DMT‐MM) without any organic solvents, additives, or buffers. Degrees of substitution (DS) up to 80% can be achieved, and the DS is adjustable by the molar ratio of DMT‐MM to PGA repeating units. Successful glycosylation of both low MW and high MW PGA was confirmed by ¹H NMR and FTIR spectroscopy as well as by an enhanced solubility at low pH. CD spectroscopy revealed that glycosylated PGAs with a DS up to 0.63 are able to undergo a pH‐responsive and reversible helix‐coil transition. However, for polymers with higher DS no transition occurs. A comparison with PGAs functionalized with monoethanolamine showed that the low helicity at high DS is not a steric effect due to the bulky sugar moieties, but a solvation effect. Preliminary turbidimetric tests with the lectin Concanavalin A indicate a biological activity of these glycosylated polypeptides. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3925–3931     

新型热作模具钢CH95的高温力学和抗磨性能研究

对比研究了CH95钢与H11钢的高温力学及抗磨性能,分析了2种模具钢的组成和微结构对其高温力学性能和抗磨性能的影响,采用透射电子显微镜观察分析了CH95钢试样中碳化物的形貌．结果表明：CH95钢与H11钢相比具有优异的高温力学性能;其优异的高温力学性能和抗磨性能归因于其特定的微观结构;CH95钢中细小且呈弥散分布的MC、M2C强化相的含量较高,使得其在高温下仍可保持优良的力学性能和抗磨性能;稀土可加速CH95钢表面致密氧化物层的形成,提高其强度、韧性、耐磨性和抗剥离能力;而经离子氮化处理后形成的细小且呈弥散分布的合金氮化物亦可起弥散强化作用,从而使得CH95钢在高温高载荷下的抗磨性能明显优于H11钢．     

Critical temperatures of elements from their boiling points

A linear relation between critical temperature and boiling point is proposed for elements belonging to the same group in the periodic table. The validity of the relationship is demonstrated for the alkalies and the groups 16, 17 and 18. From this the critical temperature of tellurium is predicted as 2325?K and that for polonium as 2277?K.     

Transformation of macromonomers into ring‐opening polymerization macroinitiators: A detailed initiation efficiency study

In the present study, n‐butyl acrylate macromonomer (BAMM) (M_n = 1900 g mol^?1; PDI = 1.96) has been synthesized via a high‐temperature polymerization process. Subsequently, the olefinic termini of the BAMM have been transformed into a diol via a dihydroxylation process using KMnO₄ as an oxidizing agent. The OH‐terminated macroinitiator pBA(OH)₂ has subsequently been employed for the ring‐opening polymerization (ROP) of ε‐caprolactone via various catalytic systems, that is, organo‐(1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene), metal (tin(II) 2‐ethylhexanoate), and enzymatic catalysis (Novozym® 435). The obtained pBA‐b‐pCL block copolymers and the initiation efficiency of the BAMM macroinitiator have been investigated via size exclusion chromatography (SEC), electrospray ionization–mass spectrometry (ESI‐MS) hyphenated with SEC and liquid chromatography at the critical conditions of both poly(ε‐caprolactone) (pCL) and pBA. The in vitro enzyme catalysis (eROP) approach proved to be the most efficient catalysis system due to minor transesterification side reactions during the polymerization process. However, side reactions such as transesterifications occur in each catalytic system and—while they cannot be suppressed—they can be minimized. The species generated during the eROP process include the desired block copolymer pBA‐b‐pCL as main species as well as pCL homopolymer and residual macroinitiator pBA(OH)₂. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Accurate measurement of thermal expansion of solids between 77 K and 350 K by 3-terminal capacitance method

The construction of a three-terminal capacitance cell and a bath type cryostat to measure thermal expansion of solids in the temperature range 77 K to 350 K is described. Calculation of the thermal expansion coefficients by using spline approximation is discussed along with the various errors involved in the measurement. The capacitance cell is calibrated by using aluminium and germanium as standard reference materials. The cell has an accuracy of 4% in the measurement of thermal expansion coefficient and a resolution of 1 Å change in length of sample of length 1 cm.     

冲击波温度和压力对二氧化钛相变的影响

 介绍了一种简便易行的降低疏松固体物质冲击波温度的方法，其要点是用液体石蜡充填样品的空隙。以用粉末锐钛矿压装成型的样品为例，对比了不充填和充填液态石蜡时冲击波作用的结果。在同样的冲击加载条件下（均为钢飞片，撞击速度为3.16 km/s），估算两种样品中达到的压力分别为36.3 GPa和46.8 GPa，平均温度分别约为4.7×10³ ℃和2.0×10³ ℃，即：充填液态石蜡的样品中压力增加了约10 GPa，但平均温度降低了近3×10³ ℃。对冲击后回收样品的分析结果表明，不充填石蜡样品的主要产物为金红石，即冲击波产生的高温起了主要作用。而充填液态石蜡时，主要生成β-TiO₂高压相，即高压起了主要作用。     

La2CuO4+δ和La2-xSrxCuO4系统中的电子输运性质

 本文解释了La₂CuO_4+δ（0≤δ≤0.09）和La_2-xSr_xCuO₄（0≤x≤0.3）两种p型系统含铜稀土氧化物中的电阻和Seebeck系数与温度的依赖关系，在室温以上，一氧大气压下的La₂CuO_4+δ系统趋于失氧；在500 K以上，超导样品显示出失氧的一级相变，并且恢复到反铁磁相。在转变温度T₁≈300 K以下，对0<δ<0.05成份的样品，相分离成反铁磁相和超导相；而在T_cρ≈100 K的温度范围内，超导相进一步分离成富空穴和贫空穴畴。在0.04≤δ≤0.09范围内，T_c处的电阻陡降出现了台阶；我们认为，它反映了电子成对的起伏。在La_2-xSr_xCuO₄系统中，对于成分为01≈300 K以上，空穴的运动是弥散的，但是ΔH_m=0；而对于x≥0.22的样品，经历了从平滑到Fermi液态的转变。成份为0c1范围（其中空穴继续以弥散方式运动）是亚稳的，但是，在T_cρ≤150 K范围，出现了电荷起伏。当样品冷却通过T₁时，对于成份为0.15≤x≤0.2的样品，经历了由弥散到强质量增强巡游电子状态的转变；在T_c处，从均匀的修饰电子的正常态凝聚成超导的载流子对。在超导成份样品的正常态中，不寻常的电子-晶格相互作用，可以归结为在CuO₂面上从更离子性的到共价性的Cu:3d_x²-r²─O:P_σ键合的转变；通过这种转变，轨道杂化和Hubbard U参量随Cu─O键长和Cu原子上的外表局域氧化态都产生灵敏的变化。     

Study of the three-dimensional Ising model on film geometry with the cluster Monte Carlo method

Topological properties of clusters are used to extract critical parameters. This method is tested for the bulk properties ofd=2 percolation and thed=2, 3 Ising model. For the latter we obtain an accurate value of the critical temperatureJ/k _B T _c=0.221617(18). In the case of thed=3 Ising model with film geometry the critical value of the surface coupling at the special transitions is determined as J_1c/J=1.5004(20) together with the critical exponents ₁ ^m =0.237(5) and=0.461(15).     

非晶硅碳薄膜发光二极管发光的热致猝灭

本文详细测试了用RF-PECVD法制备的非晶硅碳薄膜发光二极管的光强电流特性和温度对器件发光强度的影响.在直流电流驱动下,器件的发光在注入电流1A/cm2左右趋于饱和,而在低占空比的脉冲电流驱动下器件的发光直至注入电流20A/cm2仍随电流近似线性增长,但提高环境温度发光随之下降.结合对器件受热情况分析表明,热致猝灭而非场致猝灭导致了器件在大电流下的发光饱和,并简要提出了改进器件散热的措施.