Reflective mode of deformed-helix ferroelectric liquid crystal cells for sensing applications

We present a detailed theoretical and experimental study of the reflectance response of a deformed-helix ferroelectric (DHF) liquid crystal (LC) cell to an applied voltage under cross-polarisers. Using a model based on the effective dielectric tensor approximation, we derive simple analytical formulas to design a LC cell with maximum modulation depth and optimal linearity of the electro-optical response intensity versus the electric field. Our experimental results show that the cell works at frequencies up to 10 kHz and exhibits excellent linearity, with a total harmonic distortion as low as ?70 dB. These findings suggest that DHF-LCs can be exploited to develop simple and accurate optical sensors.     

Material growth and device fabrication of terahertz quantum-cascade laser based on bound-to-continuum structure

The terahertz quantum-cascade laser （THz QCL） based on bound-to-continuum structure is demonstrated. The X-ray diffraction measurement of the material shows a high crystalline quality of the active region. A THz QCL device was fabricated with semi-insulating surface-plasmon waveguide. The test device is lasing at about 3 THz and operating up to 60 K. It shows a single frequency property under different drive currents and temperatures. At 9 K, the maximum output power is greater than 2 mW with a threshold current density of 159 A/cm2.     

Theoretical analysis of the radiation effect on the transient behavior of optoelectronic integrated devices

Theoretical analysis of the radiation effect on transient behavior of an optoelectronic integrated device composed of a heterojunction phototransistor and a light emitting diode is studied theoretically. First, the transient behavior and the rise time of this device before radiation are investigated based on the frequency response of the constituent devices and the optical feedback inside the device. Second, the effect of neutron irradiation flux on the transient behavior of this device is theoretically studied. The results show that, by increasing the optical feedback inside the device, the rise time in the amplification mode is increased along with an increasing output, while that in the switching mode can be reduced effectively, and the neutron irradiation reduces the transient response and the rise time in both the amplification and switching modes. This type of model can be exploited as optical amplifier, optical switching device, and other applications.     

Novel Copper(I) Complexes and Clusters with Phosphorus-Sulfur and Sulfur-Sulfur Containing Ligands

Abstract

The synthesis and coordination chemistry of ligands bearing PS donor groups in complexes with copper(I) halides, in particular thiophosphites, thiophosphonites, and thiophosphinites, are described.     

The use of electron microscopy for the study of phase transitions

Two examples of the study of phase transitions by means of electron diffraction and electron microscopy are discussed.     

Dynamics of plasma channel in a parallel-plate plasma gun

Lumped parameter models for describing dynamics of the plasma channel in a parallel-plate plasma gun are compared with the experimental results obtained from two plasma guns with different rail geometries. Comparison between the experiments and the numerical calculations reveals that the lumped parameter models can be utilized to describe the dynamic motion of the plasma channel quite well. Parametric study shows that minimizing the line inductance and increasing the charging voltage on a capacitor as well as minimizing the gas injection time for reducing the mass of the plasma channel are the key factors to increase the flow velocity of the plasma jet ejected from the plasma gun.     

Direct and adjoint global stability analysis of turbulent transonic flows over a NACA0012 profile

In this work, various turbulent solutions of the two‐dimensional (2D) and three‐dimensional compressible Reynolds averaged Navier–Stokes equations are analyzed using global stability theory. This analysis is motivated by the onset of flow unsteadiness (Hopf bifurcation) for transonic buffet conditions where moderately high Reynolds numbers and compressible effects must be considered. The buffet phenomenon involves a complex interaction between the separated flow and a shock wave. The efficient numerical methodology presented in this paper predicts the critical parameters, namely, the angle of attack and Mach and Reynolds numbers beyond which the onset of flow unsteadiness appears. The geometry, a NACA0012 profile, and flow parameters selected reproduce situations of practical interest for aeronautical applications. The numerical computation is performed in three steps. First, a steady baseflow solution is obtained; second, the Jacobian matrix for the RANS equations based on a finite volume discretization is computed; and finally, the generalized eigenvalue problem is derived when the baseflow is linearly perturbed. The methodology is validated predicting the 2D Hopf bifurcation for a circular cylinder under laminar flow condition. This benchmark shows good agreement with the previous published computations and experimental data. In the transonic buffet case, the baseflow is computed using the Spalart–Allmaras turbulence model and represents a mean flow where the high frequency content and length scales of the order of the shear‐layer thickness have been averaged. The lower frequency content is assumed to be decoupled from the high frequencies, thus allowing a stability analysis to be performed on the low frequency range. In addition, results of the corresponding adjoint problem and the sensitivity map are provided for the first time for the buffet problem. Finally, an extruded three‐dimensional geometry of the NACA0012 airfoil, where all velocity components are considered, was also analyzed as a Triglobal stability case, and the outcoming results were compared to the previous 2D limited model, confirming that the buffet onset is well detected. Copyright © 2014 John Wiley & Sons, Ltd.     

Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating

We demonstrate a new type of fiber optic bend sensor with a hybrid structure made up of a long period grating (LPG) and a tilted fiber Bragg grating (TFBG). The sensing mechanism is based on the spectrum of power transfers between the core and cladding modes from a TFBG located downstream from a LPG. We show that the curvature of a beam can be determined by the reflected power difference between the core mode and the recoupled cladding modes. We further provide design rules for the LPG and TFBG to optimize and linearize the sensor response. In addition, the temperature cross-sensitivities of this configuration are also investigated for two different types of fiber.     

Functional connectivity between task-positive and task-negative brain areas and its relation to working memory performance

Functional brain imaging studies have identified a set of brain areas typically activated during cognitive tasks (task-positive brain areas) and another set of brain areas typically deactivated during cognitive tasks (task-negative brain areas). Negative correlations, or anticorrelations, between task-positive and task-negative brain areas have been reported at rest. Furthermore, the strength of these anticorrelations appears to be related to cognitive function. However, studies examining anticorrelations have typically employed global regression or similar analysis steps that force anticorrelated relationships to exist between brain areas. Therefore the validity of these findings has been questioned. Here we examine anticorrelations between a task-negative region in the medial frontal gyrus/anterior cingulate cortex and dorsolateral prefrontal cortex, a classic task-positive area, using an analysis that does not include global regression. Instead, we control for whole-brain correlations in the group-level analysis. Using this approach, we demonstrate that the strength of the functional connection between the medial frontal cortex and the dorsolateral prefrontal cortex is related to cognitive function and that this relationship is not an artifact of global regression.     

Preparation of Polymer-Functionalized Iron Oxide Nanoparticles and Their Biomedical Properties

Superparamagnetic iron oxide nanoparticles with narrow size distributions were successfully prepared in large scale by a facile one‐pot synthetic method in the presence of hydrophilic polymers, such as polyethylene glycol diacid (HOOC‐PEG‐COOH) and poly(acrylic acid) (PAA). The as‐prepared products were investigated in detail by powder X‐ray diffraction (XRD), thermogravimetric analyses (TGA), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), dynamic light scattering (DLS), and vibrating sample magnetometer (VSM). The interaction between polymers and iron oxide nanoparticles was investigated using Fourier transform infrared spectrometry (FT‐IR). The results show that polymers can be attached onto the surface of iron oxide nanoparticle by bridging coordination and monodentate fashion, respectively. The interaction affects iron oxide nanoparticle properties significantly, such as XRD diffraction intensity, hydrodynamic diameter, isoelectric point, and saturation magnetization. Furthermore, the results of in vitro experiments indicated that iron oxide‐PEG‐COOH nanoparticle is more cytotoxic than iron oxide‐PAA nanoparticle due to different coordinating modes.