黏弹性接触界面端附近的奇异应力场

研究蠕变加载条件下线黏弹性材料接触界面端附近的奇异应力场问题.考虑接触界面的摩擦,假设界面端的滑移方向不改变,相对滑移量微小,且其与位移同量级,由此线性化局部边界条件,根据对应原理得到Laplace变换域中的界面端应力场,导出时域中奇异应力场的卷积积分表达式.对卷积积分核函数进行数值反演,考虑接触材料的两类组合,一是持久模量具有量级上的差异,另一是持久模量接近相同.算例结果证实核函数可以用准弹性法求得的解析式较准确地近似.在此基础上,利用积分中值定理,并引入各应力分量的修正系数,得到黏弹性奇异应力场的简化式.结合核函数的数值反演结果分析修正系数表达式的取值范围,得到如下结论,若两相接触材料的持久模量相差很大,可以采用准弹性解的解析式较准确地描述界面端的奇异应力场;一般情况下,应力场不存在统一的奇异值和应力强度系数,当采用类似于准弹性解的表达式近似给出黏弹性应力场时,可以估计此近似描述的误差限.文中最后采用有限元分析黏弹性板端部嵌入部位的应力场,算例包括了黏弹性板与弹性金属支承、黏弹性板与黏弹性垫层所形成的滑移接触界面端,利用黏弹性有限元的数值结果验证理论分析所得结论的有效性.      

颗粒材料三维应力路径下的接触组构特性

颗粒材料的宏观应力变形特征与其微观接触力、组构等紧密相关.一般而言,强接触系统属于颗粒内部体系的传力结构,其对应的组构张量是影响宏观应力性质的重要因素.细观数值方法(如离散单元法)能够反映物理试验的基本规律,并且可以方便地提取宏微观数据来研究颗粒体系的应力变形机制.采用离散单元法(discrete element method,DEM)进行一系列等$p$等$b$应力路径下颗粒材料的真三轴试验,在此基础上研究了三维应力路径下颗粒材料的宏微观力学参数的演化过程、三维组构张量与应力张量多重联系以及强接触体系反映的宏观应力特征.研究表明:颗粒体系偏应力峰值状态和临界状态均存在与加载路径无关的宏微观特征;三维应力路径下组构张量与应力张量存在非共轴性,但其联合不变量演化过程表现出加载路径无关的特征;与弱接触系统的组构张量相比,强接触系统的组构张量更能反映宏观应力张量的特征;强弱接触体系的组构张量对颗粒体系宏观响应的贡献不同,其分界点存在一定取值范围,但采用平均接触力较为简单合理.      

基于LS -DYNA公路桥车桥耦合的车辆模型研究

研究公路桥梁在移动车辆荷载作用下的动力响应,建立合理的车辆模型非常重要。为更真实地体现桥梁在车载作用下的动力响应,基于LS-DYNA程序,结合常用重型车辆的结构特性及参数,对车辆的橡胶轮胎、轮胎内气体压力、车轮转动和车辆悬架系统进行模拟,使车辆模型更接近实际车辆。通过车辆轴重和动力特性初步验证车辆有限元模型的有效性;同时,以一座混凝土简支空心板梁桥为算例,验证车轮转动和车桥相互接触力,并将LS-DYNA计算结果与桥梁实测结果进行对比,进一步验证车辆有限元模型的有效性。研究结果表明,基于LS-DYNA建立的三维车辆有限元模型是可行的,可以用于研究车桥相互作用。     

盘式制动器摩擦界面接触压力分布研究

在考虑具有可变效应的移动热源影响、制动盘与片的弹性影响以及界面摩擦热流影响等的耦合作用下,建立了一个三维瞬态盘式制动器热-结构耦合模型,利用大型有限元软件ANSYS的非线性多场耦合分析方法,分别数值模拟了不同状态下的制动器摩擦接触界面上的压力场分布情况.发现制动接触压力并非均匀分布,而是与制动盘和片的变形、摩擦力以及摩擦热-结构耦合有关.     

Analysis of Vicinal Water in Soft Contact Lenses Using a Combination of Infrared Absorption Spectroscopy and Multivariate Curve Resolution

In this paper, we propose a new spectroscopic method to explore the behavior of molecules near polymeric molecular networks of water-containing soft materials such as hydrogels. We demonstrate the analysis of hydrogen bonding states of water in the vicinity of hydrogels (soft contact lenses). In this method, we apply force to hydrated contact lenses to deform them and to modulate the ratio between the signals from bulk and vicinal regions. We then collect spectra at different forces. Finally, we extracted the spectra of the vicinal region using the multivariate curve resolution-alternating least square (MCR-ALS) method. We report the hydration states depending on the chemical structures of hydrogels constituting the contact lenses.     

Determination of the second step microstructure for superhydrophobic surfaces

A selection of suitable microstructures is critical to fabrication and properties of superhydrophobic surfaces (SHS). In this study, we introduce a three‐dimensional droplet model to thermodynamically analyze the superhydrophobic properties for the purpose of determining the second step of a two‐step microstructure suitable for the SHS based on the common models within the reach of the existing macro‐machining technology. It is found that a sinusoidal microstructure is the most suitable, followed by a cone frustum and a prism in the composite wetting state, as well as the transition from hydrophilic to hydrophobic depends basically on the solid fraction rather than non‐determinative surface microscopic topography. The predictions of the model are found in quite good agreement with the experimental observations. This study will facilitate fabrication of the SHS on how to select the suitable morphology. Copyright © 2012 John Wiley & Sons, Ltd.     

超疏水涂膜的研究进展

超疏水涂膜以其独特的性能,在国防、工农业生产和日常生活中有着广泛的应用前景。但目前的制备技术制约了其在建筑外墙涂料等大型设施方面的应用。探索如何采用简单有效的方法构造和调控涂膜的双微观结构,从而获得性能持久优异的超疏水性涂膜,并有效应用于生产和生活的各个方面是这一领域研究的最终目标。本文就超疏水材料表面理论的发展和近几年来超疏水膜制备技术取得的新成果进行了概括,并指出制备超疏水涂膜存在的问题和发展方向。利用表面能极低的含氟材料,将溶胶－凝胶、相分离技术和自组装梯度功能等技术有机结合,获得适宜的表面粗糙度和微观构造,是实现超疏水涂膜工业化生产的可行途径。     

Quantification of particle-bubble interactions using atomic force microscopy: A review

The attachment of particles to bubbles in solution is of fundamental importance to several industrial processes, most notably in the process of froth flotation. During this process hydrophobic particles attach to air bubbles in solution, which allows them to be separated as froth at the surface. The addition of chemicals can help to modulate these interactions to increase the yield of the minerals of interest. Over the past decade the atomic force microscope (AFM) has been adapted for use in studying the forces involved in the attachment of single particles to bubbles in the laboratory. This allows the measurement of actual DLVO (Derjaguin, Landau, Vervey and Overbeek) forces and adhesive contacts to be measured under different conditions. In addition contact angles may be calculated from features of force versus distance curves. It is the purpose of this article to illustrate how the colloid probe technique can be used to make single particle-bubble interactions and to summarise the current literature describing such experiments.     

苯乙烯/甲基丙烯酸和苯乙烯/甲基丙烯酸(β-羟丙酯)嵌段共聚物的表面动态行为

通过测定表面动态接触角研究了两亲性的苯乙烯／甲基丙烯酸嵌段共聚物（ＰＳ ｂ ＰＭＡＡ）和苯乙烯／甲基丙烯酸（β 羟丙酯）嵌段共聚物（ＰＳ ｂ ＰＨＰＭＡ）的表面动态行为及温度、嵌段长度比等因素对其值的影响,讨论了聚合物表面当接触介质改变时链段或基团的再取向行为和表面性质     

多壁碳纳米管固相萃取-高效液相色谱-串联质谱法测定食品接触材料中双酚-二环氧甘油醚的迁移量

建立了测定食品接触材料中6种双酚-二环氧甘油醚(双酚A二缩水甘油醚(BADGE)及其衍生物双酚A(2,3-二羟丙基)甘油醚(BADGE•H2O)、双酚A(3-氯-2-羟丙基)甘油醚(BADGE•HCl)、双酚A(3-氯-2-羟丙基)(2,3-二羟丙基)醚(BADGE•H2O•HCl)和双酚F二缩水甘油醚(BFDGE)及其衍生物双酚F双(3-氯-2-羟丙基)甘油醚(BFDGE•2HCl))迁移到食品中的迁移量的高效液相色谱-串联质谱法(HPLC-MS/MS)。样品以叔丁基甲醚(MTBE)为提取溶剂,超声提取,提取液经多壁碳纳米管(MWCNTs)固相萃取(SPE)柱富集、净化。以COSMOSIL C18为分析柱,流动相为0.1%甲酸的5 mmol/L醋酸铵溶液和甲醇。6种双酚-二环氧甘油醚在1.0～100 μg/L范围内线性关系良好(r2＞0.9991)。在3个添加水平下,6种目标化合物的回收率范围为78.6%～89.9%,相对标准偏差小于10%。方法检出限范围为0.5～1.5 μg/L。该方法操作简单,灵敏度高,可应用于食品接触材料中双酚-二环氧甘油醚迁移量的快速检测。