采用MSDI严格角动量投影46Ti、48Cr形变HF谱

采用修正的表面δ相互作用(MSDI),以球形壳模型单粒子态作基矢,对fp壳层区偶偶核⁴⁶Ti、⁴⁸Cr进行形变Hartree–Fock(HF)计算,并用形变HF单粒子态构造Slater行列式波函数,即形变HF内禀态,然后对其实施严格角动量投影程序,得到比较合理的结果.     

A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension 1. Theoretical analysis

With the use of an analytical approach developed, the influence of distribution of a tangential load on the stress concentration in uniaxially tensioned flat specimens of high-strength unidirectional composites near the grips of a testing machine is evaluated. In view of singularity of the analytical solution derived at the points of discontinuity of boundary conditions, for estimating the stress concentration, it is suggested to employ the averaged value of longitudinal stresses, which is calculated by means of an improper integral across the thickness of a near-surface layer. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 6, pp. 787–796, November–December, 2006.     

四（对-羟基苯基）卟啉氧合配合物的室温固相合成，表征及氧合能力

采用固相反应合成了四羟基苯基卟啉与与Fe^2＋,Co^2＋金属离子的配合物,在室温下,将其与分子O2作用,提纯后得到两种固态氧合配合物．通过元素分析、红外光谱（IR）、核磁共振氢谱（^1HNMR）、电导、热分析（TG／DTA）、紫外光谱（UV）等测试手段确定了氧合配合物的组成为[Co·THPP·O2]（NO3）2·2H2O、[Fe·THPP·O2]Cl2·2H2O]，可知1mol配合物吸收了1molO2,采用失重法测定了氧合配合物中的配位氧,确定1mol金属配合物吸收1molO2形成超氧配合物．     

Thermodynamic derivative properties and densities for hyperbaric gas condensates: SRK equation of state predictions versus Monte Carlo data

The ability of Soave–Redlich–Kwong cubic equation of state (SRK EoS) to predict densities and thermodynamic derivative properties such as thermal expansivity, isothermal compressibility, calorific capacity, and Joule–Thompson coefficients, for two gas condensates over a wide range of pressures (up to 110 MPa) was studied. The predictions of the EoS were compared to Monte Carlo simulation data obtained by Lagache et al. [M.H. Lagache, P. Ungerer, A. Boutin, Fluid Phase Equilibr. 220 (2004) 221]. Two completely different alpha functions for the SRK EoS attractive term were used and their respective effects on the predictions of such properties were analyzed. Also, two different forms of the crossed terms of the attractive parameter, a_ij, and three expressions of the crossed terms of the repulsive parameter, b_ij, were combined in different ways, and predictions were carried out. Little sensitivity of the properties on the chosen alpha function, except for the calorific capacities, was found in the systems studied. The most commonly used combination rules to model phase behavior of reservoir fluids, i.e. geometric and arithmetic forms of a_ij and b_ij, respectively, predicted very deficient results for these fluids at extreme conditions, specially for density calculations.     

相位差与q变形广义相干叠加态的压缩特性

对于q变形的非简谐振子广义相干态的叠加态β〉+eiφβeiδ〉,其量子涨落的可能高阶压缩阶数可以表示为k≠2πn/δ,这里n是整数.当δ=π时,压缩阶数不能是偶数即只能是奇数,这正是q变形非简谐振子广义奇偶相干态的结果.由此表明参数相位差δ对决定q变形的非简谐振子广义相干态叠加态的高阶压缩阶数起决定性作用.     

利用GHZ态实现多原子缠结态的量子隐形传态(英文)

提出一种利用 GHZ态实现多原子缠结态的量子隐形传态方案 .当作为量子通道的 GHZ态含有一个单模高 Q腔时 ,大大地简化了量子稳形传态中的联合测量过程     

Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

相对论平均场理论对196Pb超形变态的研究

在形变约束的相对论平均场理论框架下, 用TMA, PK1, NL3和NL-SH相互作用对¹⁹⁶Pb的超形变态进行了系统研究. 给出了¹⁹⁶Pb的位能曲线、基态和超形变态的形变以及超形变态退激的激发能. ¹⁹⁶Pb的基态为β₂≈－0.15的扁椭球, 超形变激发态为β₂≈0.60的长椭球, 激发能在4－5MeV之间, 势阱深度在1－2.2MeV之间. 这些结果与最近观测的实验数据符合得非常好, 表明相对论平均场理论能够较好地描述¹⁹⁶Pb超形变转动带带首的能量.     

A detailed analysis of the photoemission spectra of basic thioaromatic monolayers on noble metal substrates

Analysis of photoemission spectra of complex thioaromatic self-assembled monolayers (SAMs) requires the knowledge and understanding of such spectra for the basic systems. Keeping this goal in mind, synchrotron-based high-resolution X-ray photoelectron spectroscopy was used to characterize SAMs formed from the simplest thioaromatic compounds, namely thiophenol, 1,1′-biphenyl-4-thiol and 1,1′;4′,1″-terphenyl-4-thiol on evaporated Au(1 1 1) and Ag(1 1 1) substrates. The acquired S 2p and C 1s spectra were analyzed in terms of fine structure and initial and final state effects in the photoemission process. The assignment of the individual spectral features was considered in detail. Conclusions on quality and chemical and structural homogeneity of the investigated SAMs were derived.     

Crystal dissolution kinetics and Gibbs free energy

The dependence of dissolution rates on the difference of Gibbs free energy is of critical importance for our understanding of crystal dissolution, reactive flow models and their applications to a variety of environmentally related problems. Here, we review experimental data generated with mineral powders and single crystals to develop a better understanding of apparent inconsistencies between otherwise internally consistent data sets. Additional information from direct surface observations and measurements with vertical scanning interferometry (VSI) and atomic force microscopy (AFM) of albite dissolution at 25, 150 and 185 °C may shed new light on this old but unsolved question. Our discussion is based on the importance of etch pit development, its ΔG dependence, and the pits’ role as a source for steps and step movement in the dissolution process. Results indicate that reaction history may be of critical importance in determining the overall reaction mechanism and its rate. Different rates are observed for systems having otherwise identical ΔG_r acquired from increasing versus decreasing disequilibrium positions.

In this context, we finally discuss the validity of the common application of transition state theory (TST) to elementary and overall reactions governing the dissolution process. In this discussion of crystal dissolution, we contrast TST applications with a stochastic, many-body treatment that has led to the development of a stepwave model. This discussion also focuses on the controversy caused by the rivalry between surface adsorption models and a probabilistic model that seeks to incorporate the full three-dimensional crystal structure.