Abnormality in using cyclic fatigue for ranking static fatigue induced slow crack growth behavior of polyethylene pipe grade resins

Slow crack growth behavior in polyethylene pipe grade resins were studied using both static fatigue (stress-rupture) and cyclic fatigue tests. This was done to better understand the applicability of cyclic fatigue in the prediction of slow crack growth ranking determined from the static fatigue test. In all polyethylene pipe grade resins tested at 80 °C, reduced crack growth failure times were exhibited when the cyclic fatigue test was employed. However, when applied to rank the resins through their slow crack failure times, the cyclic fatigue results did not always confirm those obtained from the static fatigue test. That is, in some cases, a resin with higher slow crack resistance ranking (longer failure times) than another resin in static fatigue exhibited lower ranking (shorter failure times) in the cyclic fatigue test. This abnormality of reversal in ranking is not a general observation but does occur. Based on the data obtained so far, when resins with smaller differences between static fatigue and cyclic fatigue slow crack growth failure times are compared with those resins having larger differences, the chances of correctly predicting the ranking obtained from static fatigue using cyclic fatigue tend to decrease. Hence, it is suggested that one needs to practice caution when using cyclic fatigue to predict the static fatigue ranking of resins for slow cracking resistance. Some insight into the cause of such abnormality is discussed with reference to creep-fatigue interactions.     

基于扩展有限元的页岩水平井多裂缝模拟研究

页岩储层水平井分段多簇压裂簇间距优选是压裂技术的关键,建立了水力压裂流固耦合数学模型,基于扩展有限单元法模拟多条裂缝的扩展过程,研究多条裂缝同时扩展的转向规律,以及应力干扰、水平主应力差、裂缝间距等因素与裂缝转向角度的关系.结果表明:应力干扰作用对裂缝宽度具有限制作用,单条裂缝张开宽度比两条裂缝的大;裂缝转角随应力差的减小而增大,随压裂时间的增加而增大.簇间距越小,应力干扰越强,转角越大,综合主缝均匀扩展、支撑剂填充以及复杂裂缝网络形成等条件,确定最优簇间距为30~40 m.多条裂缝同时扩展时,中间裂缝会受到两边裂缝的限制作用,簇间距越小,限制作用越强,裂缝发育时间越长,扩展速度越慢.     

基于滑动Kriging插值的MLPG法求解结构非耦合热应力问题

将基于滑动Kriging插值的无网格局部Petrov-Galerkin(MLPG)法用来求解二维结构非耦合热应力问题,首先进行瞬态热传导的求解,然后再通过顺序耦合法将不同时刻节点温度作为附加体力项施加到应力分析中.瞬态温度场和非耦合热应力分析通过加权余量法来离散,同时用Heaviside分段函数作为局部弱形式的权函数.由于滑动Kriging插值构造的形函数满足Kroneckerδ函数的性质,因此方便了本质边界条件的施加.刚度矩阵形成过程中只涉及到边界积分而没有涉及到区域积分,因此可以减少计算工作量,最后通过两个数值算例来验证本文方法的有效性.     

高速运动裂纹扩展和分叉现象的近场动力学数值模拟

首先介绍了近场动力学的基本理论,然后以两个实例分析了高速运动裂纹的扩展及分叉现象.分析了近场动力学参数(邻域半径、相邻节点距)及外部参数(材料的弹性模量、密度、温度改变量)等对裂纹分叉的速度和角度的影响并进行了对比分析,数值结果表明:随着邻域半径的增大,裂纹传播速度逐渐减少而裂纹分叉角度逐渐增加;随着相邻节点间距的增加,裂纹的传播速度逐渐减少而裂纹分叉角度也逐渐减少;裂纹分叉长度偏向于弹性模量小和密度大的材料;裂纹传播速度随着弹性模量差值的增大而增大,随着密度差值的减小而增大,同时随着外界温度改变量的增大而减少.近场动力学能自发地模拟裂纹扩展和分叉,不需要借助任何外部准则,不需要预先设置裂纹扩展路径,因此它具有天然的优势.     

煤岩体压裂裂缝演化混沌特征研究

准确地描述煤岩体压裂裂缝的形成与演化规律对煤层气井开采具有重要意义.本文以煤岩体压裂裂缝演化过程的微裂缝演化数目、裂缝尖端区域的径向应力与周向应力作为描述裂缝演化的特征指标,引入关联维数、最大Lyapunov指数和Ko1mogorov熵作为裂缝演化系统的混沌特征量,计算与描述煤岩体压裂裂缝的损伤演化过程.以黑龙江省某一煤岩开采区块岩体作为研究对象,计算分析煤岩体压裂裂缝的形成的混沌特征,为后续煤岩体压裂裂缝形成规律的研究提供了新的思路.     

完备流形上拉普拉斯算子的L2特征形式

本文研究了完备非紧流行上拉普拉斯算子的L²特征形式.利用应力能量张量的方法,得到在此类流形上拉普拉斯算子的L²特征形式的一些不存在性定理。     

尼龙1010应力松弛行为研究

尼龙1010样品在初始应变为1%、2.8%和5.1%的条件下,在不同的恒温环境中分别进行不少于10 h的应力松弛实验,得到20~80℃范围的应力松弛曲线.研究了不同应力、温度下的应力松弛速率、松弛过程的残余应力、活化体积以及相关参数的数学关系.结果表明,尼龙样品在松弛过程中存在一定的形变残余应力,体系存在恒定的长时模量.不同初始应变的尼龙样品松弛过程表现出相似的规律,当松弛速率-d(σ/σ0)/dlnt达到最大值后,在一段时间内聚合物内部活化单元发生松弛,-dσ/dt与作用于样品的有效应力σ*为指数关系.随着松弛过程的进行,应力减小到一定程度后,活化体积V逐渐增加,此时独立的活化单元运动受到限制,聚合物内部依靠多个活化单元的协同运动将内应力逐渐松弛,应力辅助功Vσ*为常数,-dσ/dt与σ*满足幂律关系,幂指数为σ*V/(k T).     

二阶关联成像系统宽光谱吸收膜研制

为满足关联成像系统抑制背景的需求,选用Al、Cr和SiO_2作为镀膜材料,依据薄膜吸收理论,结合膜系设计软件设计了宽光谱吸收膜,并采用真空沉积技术获得了该薄膜样品.通过真空阶梯式退火,减小了膜层内应力,解决了薄膜牢固度问题;采用交互式分析对测试结果逆向反演,通过优化工艺参量,使膜系中敏感薄层厚度得以精准控制,并减小了膜厚控制误差.制备的吸收膜在400~1 100nm波段平均吸收率达到99.1%,满足系统使用要求.     

Anisotropic Reynolds stress tensor representation in shear flows using DNS and experimental data

Tensorial decompositions and projections are used to study the performance of algebraic non-linear models and predict the anisotropy of the Reynolds stresses. Direct numerical simulation (DNS) data for plane channel flows at friction Reynolds number (Re_τ = 180, 395, 590, 1000), and for the boundary layer using both DNS (Re_τ = 359, 830, 1271) and experimental data (Re_τ = 2680, 3891, 4941, 7164) are used to build and evaluate the models. These data are projected into tensorial basis formed from the symmetric part of mean velocity gradient and non-persistence-of-straining tensor. Six models are proposed and their performances are investigated. The scalar coefficients for these six different levels of approximations of the Reynolds stress tensor are derived, and made dimensionless using the classical turbulent scales, the kinetic turbulent energy (κ) and its dissipation rate (ε). The dimensionless coefficients are then coupled with classical wall functions. One model is selected by comparing the predicted Reynolds stress components with experimental and DNS data, presenting a good prediction for the shear and normal Reynolds stresses.