Notched Ring Test for Measuring Slow Cracking Resistance in Plastics Pipes and Fittings

It is known, that the lifetime of polyethylene pipes is essentially limited by slow crack growth (SCG). For state of the art PE materials common SCG testing methods have reached their limits with respect to extension of testing times. A comparatively new method is the Notched Ring Test (NRT) as developed by Choi et al.^[1] Pipe rings notched at the inner wall are used. The test is carried out in 80 °C water under constant bending load. The arrangement of the notch at the inner wall reduces testing times using the residual stress of extruded pipes. A disadvantage of this method is that there is no clearly defined failure time because SCG takes place between two phases of creeping. The output of this test is an “on-set slow cracking time” (crack initiation), obtained by analysis of the displacement curve. In this work it has been shown that the NRT method yields to brittle fracture within acceptable time frames.^[2] Methods for data analysis are presented. This test could be very useful applied in research and development for resin evaluation and as a tool in quality control in pipe production for evaluating the process conditions.     

一维六方准晶中带三条不对称裂纹的圆形孔口问题的解析解

利用复变函数方法,通过构造保角映射,研究了一维六方准晶中带不对称三裂纹的圆形孔口的反平面剪切问题,给出了Ⅲ型裂纹问题的应力强度因子,在极限情形下,不仅可以还原为已有的结果,而且求得一维六方准晶中L裂纹问题在裂纹尖端的应力强度因子.     

Age dependence of the drag force in an aqueous foam

The drag force on a sphere moving through an aqueous foam is measured as the foam ages. After an initial period, the steady-state drag decreases with age T as T ^{−0.54±0.14}. As the mean bubble size R in the foam coarsens as T ^0.5, this implies that the drag force scales as The transient buildup of the force when the sphere starts to move is described by a single exponential approach to the steady-state drag while its relaxation when the motion stops is described by the sum of three exponential relaxations. This is as for fresh foam, but the coefficients and time constants vary systematically with age. For the most part, these quantities also show a power law scaling with T. The age dependence of the quantities determined in this study is discussed in terms of the mean bubble size.     

负压爆炸载荷和数据采集间隔对弹性开孔板动应力集中的影响

基于ANSYS 7.0/LS-DYNA程序,对3 m3 m四边简支,厚度0.025 m,中心开有0.3 m0.3 m方孔的弹性板,在正压和负压三角爆炸载荷作用下的应力响应进行了分析,利用能量密度时间分布函数（TDFED）确定了动应力集中因子,并给出其计算步骤。计算结果表明计算总时间和数据采集时间间隔对动应力集中因子影响较大,而负压荷载影响较小。     

Reconstruction of cracks of different types from far‐field measurements

In this paper, we deal with the acoustic inverse scattering problem for reconstructing cracks of possibly different types from the far‐field map. The scattering problem models the diffraction of waves by thin two‐sided cylindrical screens. The cracks are characterized by their shapes, the type of boundary conditions and the boundary coefficients (surface impedance). We give explicit formulas of the indicator function of the probe method, which can be used to reconstruct the shape of the cracks, distinguish their types of boundary conditions, the two faces of each of them and reconstruct the possible material coefficients on them by using the far‐field map. To test the validity of these formulas, we present some numerical implementations for a single crack, which show the efficiency of the proposed method for suitably distributed surface impedances. The difficulties for numerically recovering the properties of the crack in the concave side as well as near the tips are presented and some explanations are given. Copyright © 2009 John Wiley & Sons, Ltd.     

Couple stress fluid improve rub-impact rotor-bearing system – Nonlinear dynamic analysis

This study performs a dynamic analysis of the rub-impact rotor supported by two couple stress fluid film journal bearings. The strong nonlinear couple stress fluid film force, nonlinear rub-impact force and nonlinear suspension (hard spring) are presented and coupled together in this study. The displacements in the horizontal and vertical directions are considered for various non-dimensional speed ratios. The numerical results show that the dynamic behaviors of the system vary with the dimensionless speed ratios, the dimensionless unbalance parameters and the dimensionless parameter, l^∗. Inclusive of the periodic, sub-harmonic, quasi-periodic and chaotic motions are found in this analysis. The results of this study contribute to a further understanding of the nonlinear dynamics of a rotor-bearing system considering rub-impact force existing between rotor and stator, nonlinear couple stress fluid film force and nonlinear suspension. We also prove that couple stress fluid used to be lubricant do improve dynamics of rotor-bearing system.     

A Simple Method of the Hyperfine Field Direction Estimation from the Moessbauer Experiment

A simple method is proposed for the estimation of the average hyperfine field, i.e. the magnetization direction in the foil samples from the ⁵⁷Fe Moessbauer spectra measured at three different orientations. The intensity ratios in the Moessbauer spectra of the sample perpendicular to the gamma-ray propagation direction and tilted by 45° in the longitudinal and transversal planes yield both angle coordinates of the hyperfine field direction without supposing the direction vector normalization, i.e., avoiding the necessity of line intensities corrections. The method is demonstrated by showing the influence of heat and mechanical treatments on the magnetization direction in two amorphous alloys, Fe₈₀Cr₂Bi₁₄S₄ and Fe₄₀Ni₄₀B₂₀, the latter showing a pronounced stress annealing induced magnetic anisotropy.     

Zerstörungsfreie risstiefenbestimmung in Betonbauwerken mittels Radiotracerverfahren

At the Leipzig Technical University a method was developed, which allows to determine nondestructive the crack depth in concrete up to 15 cm. Based on a radiotracer technique the access to only one side of the object is required. The labelling of artificial-made cracks was carried out by use of a transport medium (not miscible with water) on the base of methyl isobutyl ketone (MIBK) and In- 113m as radionuclide. For the calculation of crack depth, measure-geometrical parameters were used. The improvement of the reliability of building-diagnostical interpretation using radio-physical parameters is described. A first application is provided for concrete structures below chemical equipments built as a barrier against ecologically harmful substances (petrol tanks). The intersectional aspect of further qualifications of the technique is emphasized.     

激光喷丸改善TC6钛合金组织和力学性能

为了使激光冲击强化技术能较好地应用于TC6钛合金的发动机叶片,对TC6钛合金进行试验研究。通过X射线衍射仪、透射电子显微镜等测试技术分析了不同参数下TC6钛合金的微观组织变化,用显微硬度计和残余应力测试仪分别表征表层硬度和残余应力变化,并测试材料冲击后的振动高周疲劳性能。试验结果表明:激光冲击材料后表面组织得到明显细化,随着冲击次数的增加,先后出现了高密度位错、位错胞、亚晶和纳米晶。性能方面,表面硬度在冲击一次即可提高19%,硬度影响深度达到700 m;与此同时表面残余应力最高达到-608.5 MPa,在500 m深度上仍具有-100 MPa左右的应力存在。经三次冲击后,标准疲劳试片的疲劳极限提高近20%。     

强流脉冲电子束作用下金属锆的微观结构与应力状态

利用强流脉冲电子束 (HCPEB) 技术对金属纯锆进行表面处理, 采用X射线衍射, 扫描电子显微镜及透射电子显微镜详细分析了辐照诱发的表层微观结构和缺陷. X射线分析结果表明, HCPEB辐照后在材料表层诱发幅值为GPa量级的压应力, 并形成{0002}, {1012}, {1120}及{1013}织构. 表层微观结构观察表明, 与其他金属材料不同, HCPEB辐照在材料表层诱发的熔坑数量极少, 多次轰击甚至几乎没有表面熔坑的形成. 此外, 在快速的加热和冷却状态下, 在表面熔化层形成大量的超细晶粒结构, 同时诱发马氏体相变和强烈的塑性变形. 1次HCPEB辐照后表层内形成的变形微结构以位错为主, 孪晶数量较少; 5 次辐照样品的位错密度迅速增高, 孪晶数量也显著增加; 10次辐照后样品中的变形微结构以变形孪晶为主, 且出现二次孪晶现象. 表层晶粒内部变形的晶体学特征不仅决定了表层的织构演化行为, 而且还起到细化晶粒的作用, 为纯锆及锆合金表面强化提供了一条有效的途径. 关键词： 强流脉冲电子束 纯锆 微观结构 应力状态