Characterization of Kovar-to-Kovar laser welded joints and its mechanical strength

For the packaging of a pump laser in butterfly package, the most crucial assembly step is the fiber-to-laser diode coupling and attachment. The use of laser welding as the joining method offers several advantages if compared with the adhesive joints: strong joining strength, short process time and less contamination. This paper reports on laser welding process characteristics; weld strength and its fracture mode. The penetration depth and melt area of laser spot welds were found to be complicated functions of laser pulse energy, intensity, and beam diameter. Effects of pulse width, input power and size of the focal spot on the rate of energy input to the workpieces and consequently, the weld strength were reported. The weld strength was found to be dependent on the overlapping area between the two joining materials. Surface roughness, R_a, has influence on the fraction of energy absorbed, A, and therefore, affecting the penetration depth. Thermal analysis was carried out on the laser-welded joints and its heat-affected zone (HAZ) induced by various power densities was examined. These data are important in order to optimize and utilize the laser welding process as an effective manufacturing tool for fabrication of reliable pump laser.     

岩土强度与变形关系的理论剖析

深入浅出地阐述了岩土强度与变形关系，并对一些令人困惑的问题进行了讨论和作出可能的解释。     

聚类分析分类结果合理性考核方法

对聚类分析应用于肿瘤分型时的分类结果合理性考核方法进行探讨.该方法借助于预测强度指标,并结合中位数及95%参考值范围的概念来比较不同聚类方法得到的分类的合理性,在一定程度上弥补了聚类分析方法的应用不足.在对白血病患者分型时取得了很好的效果.     

Transmission Characteristics of Multi-Soliton Train in Twin-Core Fiber

Transmission characteristics of multisoliton train are analyzed by numerical simulation in twin-core fiber. It is shown that stable transmission of multisoliton train requires some difference of initial relative phase and enough initial relative separation between input solitons under strong coupling between two cores.     

钢丝绳模型比较研究

将现有的各种钢丝绳计算模型进行比较研究，通过将数值结果与现有的实验数据进行比较可以看出，考虑绳芯变化并结合Love曲杆理论的JW和KC模型更适用于实际的钢丝绳结构。     

Ring‐opening copolymerization of ethylene carbonate and ε‐caprolactone catalyzed by neodymium tris(2,6‐di‐tert‐butyl‐4‐methylphenolate): Synthesis,characterization, and dynamic mechanic analysis

The ring‐opening copolymerization of ethylene carbonate (EC) with ε‐caprolactone (CL) was carried out using neodymium tris(2,6‐di‐tert‐butyl‐4‐methylphenolate) as a single‐component catalyst. Copolymers containing up to 22.0% EC contents with high molecular weights (up to 23.97 × 10⁴) and moderate molecular weight distributions (between 1.66 and 2.03) were synthesized at room temperature. Compared with homopoly(ε‐caprolactone), the copolymers with EC units exhibited increased glass transition temperatures (?35.6 °C), reduced melting temperatures (44.5 °C), and greatly enhanced elongation percentage at break (2383%) based on dynamic mechanic analysis. The crystallinities of the copolymers decreased with the increasing EC molar percentage in the products. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4050–4055, 2008     

Redox,ionic strength,and pH sensitive supramolecular polymer assemblies

Formation of micelle‐type assembly from supramolecular complexation of a surfactant and an oppositely charged homopolymer is demonstrated. The lower CAC observed for these assemblies suggest that the electrostatic interaction provides an amphiphilic homopolymer‐like structure. The stimulus‐induced disassembly of these supramolecular structures has been accomplished with variations in redox characteristics, ionic strength, and pH of the medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1052–1060, 2009     

Preparation and characterization of cellulose and konjac glucomannan blend film from ionic liquid

Blend films from cellulose and konjac glucomannan (KGM) in room temperature ionic liquid 1‐allyl‐3‐methylimidazolium chloride were satisfactorily prepared by coagulating with water. The composition of the blend films was gravimetrically analyzed, and the compatibility of the two natural polymers was characterized by Fourier transform infrared spectroscopy and wide‐angle X‐ray diffraction. The results indicate good compatibility and strong interactions between cellulose and KGM, resulting in almost no loss of the water‐soluble KGM from the blend films even after the water coagulating and washing. However, microstructure analyses portrayed phase separations in the blend films, namely, egg‐like new phase particles were embedded in a continuous matrix base (MB). Phase diagram analysis and differential scanning calorimetry of the phase inversion coagulation process suggest that relative low molecular mass part of both cellulose and KGM formed the continuous MB, whereas the egg‐like new phase particles were super patterns of relative high molecular mass of both polymers, which played an important role in strengthening the blend material. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1686–1694, 2009     

CuZnAl记忆合金有序转变的固体电子论分析

应用固体经验电子理论,并联系 G.Inden 的有序转变温度与原子间作用能的关系式,计算了 CuZnAl 记忆合金的 A_2到 B_2,B_2到 DO_3两种有序转变温度随合金元素变化的规律。计算得出的变化趋势与实验结果符合得相当好,表明所采用的理论模型可以说明 CuZnAl 合金的记忆性能和用来指导探索新的记忆合金。     

The role of the bubble–bubble interaction on radial pulsations of bubbles

Using a model that with or without considering the interaction between bubbles through the radiated pressure waves, numerical simulations of cavitation bubbles have been performed in order to study the effect of the bubble–bubble interaction on radial pulsations of bubbles. Comparing the results obtained by with or without considering the bubble–bubble interaction, it is suggested that the suppression or enlargement property of expansion ratios of bubbles due to the bubble–bubble interaction largely depends on the ultrasound parameters, the ambient bubble radii, the distances between bubbles and the number of bubbles (in multi-bubble environment, the last two aspects can be expressed using the coupling strength). The frequency response curve of expansion ratio decreases and shifts to left due to the bubble–bubble interaction and the larger the coupling strength is, the more the left-shifting is.