First-principles prediction of crystal structure and physical properties of ScB3

The crystal structure of ScB₃ is seeked by combining the developed particle swarm optimisation algorithm for crystal structure prediction with first-principles calculations. A new monoclinic phase with the C2/m symmetry is predicted successfully, which is energetically more superior to the early reported R-3m-, P2₁/m-, P6₃/mmc-, P-6m2-, Pnma-, and Pm-3m-type structures in the pressure range from 0 to 100?GPa. The obtained elastic constants and phonon dispersion curve reveal that the C2/m-ScB₃ is mechanically and dynamically stable. The predicted large bulk module, high shear modulus, small Poisson’s ratio as well as the considerable hardness indicate that the C2/m-ScB₃ has outstanding mechanical property. Meanwhile, the dependences of the bulk modulus and Young’s modulus of ScB₃ on the crystal orientation are investigated theoretically. Through applying the strain–stress method, the ideal tensile and shear strengths along different crystal directions are also estimated, and the obtained results confirm that the shear mode dominates the failure mode in the C2/m-ScB₃ structure and it is intrinsically a hard material. The electronic structure calculation and chemical bonding analysis illustrate that the strong covalent B-B and Sc-B bonds are responsible for its structural stability and high hardness.     

Relationship between the radial dynamics and the chemical production of a harmonically driven spherical bubble

The sonochemical activity and the radial dynamics of a harmonically excited spherical bubble are investigated numerically. A detailed model is employed capable to calculate the chemical production inside the bubble placed in water that is saturated with oxygen. Parameter studies are performed with the control parameters of the pressure amplitude, the forcing frequency and the bubble size. Three different definitions of collapse strengths (extracted from the radius vs. time curves) are examined and compared with the chemical output of various species. A mathematical formula is established to estimate the chemical output as a function of the collapse strength; thus, the chemical activity can be predicted without taking into account the chemical kinetics into the bubble model. The calculations are carried out by an in-house code exploiting the high processing power of professional graphics cards (GPUs).The results shown that chemical activity can be approximated qualitatively from the values of relative expansion. This could be helpful in order to optimise chemical output of sonochemical reactors either from measurement data or simulations as well.     

Studies on the syntheses of polymetalloxanes and their properties as a precursor for amorphous oxide. IV. Properties of SiO2–TiO2 oxide fibers from polytitanosiloxane

From polytitanosiloxanes (PTS), SiO₂–TiO₂ oxide fibers with fairly good tensile strength were prepared, and their mechanical and thermal properties were investigated. The precursor fibers PTS-0.5 and PTS-1.0 were obtained by dry spinning of a highly viscous PTS solution which were formed as the reaction mixture of silicic acid (SA) with bis(2,4-pentanedionato)titanium diisopropoxide (PTP) in the molar ratios (SA/PTP) of 0.5 and 1.0. The precursor fibers PTS-0.5 were too brittle to measure their tensile strength, whereas PTS-1.0 and the heat-treated fibers were found to have tensile strength of 130 (precursor), 540 (500°C), and 450 (900°C) MPa, respectively. Heat-treatment of the fibers PTS-1.0 at above 1000°C forms anatase and rutile of titanium dioxide. The crystallization is resulted from the unreacted PTP which is not incorporated into the polymer network.     

Novel Foaming-Agent Free Insulating Geopolymer Based on Industrial Fly Ash and Rice Husk

This study highlights the synthesis of a new thermal insulating geopolymer based on the alkaline activation of fly ashes. A porous geopolymer material can be prepared without the addition of a foaming agent, using high ratio solution/ashes (activating solutions used are water, sodium or potassium hydroxide). In order to increase the porosity of the material and to make it more ecological, rice husks are incorporated into the formulation. The geopolymer materials were prepared at room temperature and dried at moderate temperature (105 °C) by a simple procedure. The microstructural characteristics of these new porous geopolymers were assessed by optical microscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and X-ray fluorescence (XRF). Infrared spectroscopy (FTIR) was used to confirm the geopolymerisation. The effect of the ratio solution/ashes and the percentage of the rice husk addition on thermal and mechanical analysis was evaluated. An insulating material for a solution/ashes ratio of 0.9 and a rice husk content of 15% having a λ value of 0.087 W/(m·K), a porosity of 61.4% and an Rc value of 0.1 MPa was successfully prepared.     

不同泄压条件对方管内爆炸压力特性的影响

为研究泄压膜约束条件对甲烷/空气预混气体爆炸压力特性的影响,在方形火焰燃烧传播测试管道中布置压力传感器,开展不同泄压膜材料、泄压膜层数及泄压口位置实验。结果表明:牛皮纸和聚丙烯薄膜约束泄爆过程中,每增加一层泄压膜,管道内最大泄爆压力平均上升11.2%和12.3%。各强度泄压膜约束条件下,管道内最大泄爆压力随着泄压口位置接近点火端,均呈现Z形规律,当泄压口设置在距尾部端面0.25 m时,各曲线达到最小值,当泄压口设置在距尾部端面0.50 m时,各曲线出现最大值。     

考虑塑性变形发展程度系数的RC梁开裂弯矩改进计算公式

针对RC梁开裂荷载计算方法尚未统一的现状,首先,结合18根RC梁试验数据对比了已有的6种RC梁开裂弯矩计算公式,发现开裂弯矩理论计算值与试验值的偏差大小和混凝土强度有关;然后,通过提出塑性变形发展程度系数k,推导新的RC梁开裂弯矩计算公式,并进一步基于k值和塑性影响系数计算值γ_k进行改进;最后,选取12根RC试验梁验证改进公式的准确性,证明改进公式的计算值与试验值吻合更好且偏于安全。     

Relationships among Preparative Technique,Phase Composition and Bending Strength of Bauxite Porcelain

1 INTRODUCTION Bauxite porcelain is a novel “K2O–Al2O3–SiO2” system ceramic by using sintered bauxite, clay and potash feldspar and albite as the main raw materials with the Al2O3’s content of 50%～60(massfraction). Compared to the traditional“K2O–Al2O3–SiO2” feldspar porcelain by using quartz, bolus alb and potash feldspar and albite as the main raw materials, the bauxite porcelain possesses such advantages as high mechanical strength, excellent electrical insula- tion prop…     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

PREPARATION AND ELECTROCHEMICAL CHARACTERISTICS OF POLYMER ELECTROLYTE MEMBRANES BASED ON SAN/PVDF-HFP BLENDS

A copolymer of poly(acrylonitrile-co-styrene) (SAN) was synthesized via an emulsion polymerization method. Novel polymer electrolyte membranes cast from the blends of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), SAN and fumed silica (SiO2) are microporous and can be used in polymer lithium-ion batteries. The membrane shows excellent characteristics such as high ionic conductivity and good mechanical strength when the mass ratio between SAN and PVDF-HFP and SiO2 is 3.5/31.5/5. The ionic conductivity of the membrane soaked in a liquid electrolyte of 1 mol/L LiPF6/EC/DMC/DEC is 4.9×10-3 S cm-1 at 25℃. The membrane is electrochemical stable up to 5.5 V versus Li /Li in the liquid electrolyte. The influences of SiO2 content on the porosity and mechanical strength of the membranes were studied. Polymer lithium-ion batteries based on the membranes were assembled and their performances were also studied.     

羧基丁苯-纳米氧化硅复合粉末增韧聚苯乙烯的研究

用直接分散聚合法制备了羧基丁苯-纳米氧化硅杂化胶乳,经喷雾干燥得到的羧基丁苯-纳米氧化硅复合粉末通过本体-悬浮聚合和熔融共混法制备了高抗冲聚苯乙烯.结果表明,本体/悬浮聚合法中预聚转化率的控制与复合粉末的加入量有关,当加入的复合粉末的质量分数为0.05时,冲击强度可提高5倍,也高于熔融共混法所制备的改性聚苯乙烯.本体/悬浮聚合法制备的改性聚苯乙烯的热分解温度（Td）高于熔融共混法改性的,且Td随复合粉末加入量的增加而提高,但改性聚苯乙烯的刚性有一定程度的降低,而对材料的玻璃化转变温度影响不大.