Comparative study on the propagation performance of coherently combined and incoherently combined beams

Taking phase error, turbulent atmosphere, jitter, vacancy factor and tilt error into consideration, we propose a general propagation formula for both coherent and incoherent combined beams with different kinds of aberrations. Comparative study on the propagation performance of coherent and incoherent combined beams is presented. Beam propagation factor (BPF) defined as laser output power in a specified far-field bucket divided by the total output power radiating from the effective near-field exit aperture of the laser beam is introduced as the beam quality factor to give a quantitative study. It is revealed that the coherent combined beam has great advantage when propagating in free-space compared with the incoherent combined beams. However, the coherent combined beam is more sensitive to the environmental aberrations, and the beam quality degrades faster with an increase in the aberrations’ intensity. Scintillation index as the high moments of the combined intensity field is also studied. It is revealed that both coherent and incoherent combined beams exhibit less scintillations compared with a single-aperture beam, and the incoherent combined beam demonstrates better scintillations reducing the performance. Our methodology offers an all-round performance evaluation on the two kinds of laser systems.     

Influence of boron on the initial stages of Si molecular beam epitaxy on Si(1 1 1) studied by reflection high-energy electron diffraction

The influence of boron as a function of coverage on molecular beam epitaxial Si growth on Si(1 1 1) surface was systematically studied by reflection high-energy electron diffraction. At boron coverage above 0.3 monolayer regular oscillations occur with a period typically for two-bilayers, whereas at lower boron coverage a transient behaviour with irregular intensity oscillations was observed in the initial growth stages. This behaviour can be attributed to a superposition of a bilayer and a two-bilayer dominated growth mode. The appearance of these two growth modes is discussed in terms of an initial surface defect-induced nucleation of bilayer-high Si islands and the formation of two-bilayers-high Si islands on top of the van der Waals like boron-covered surface, respectively. We suggest that these surface defects are of intrinsic nature, and their number only depends on the amount of boron at the surface. The oscillations become regular during further Si deposition with a bilayer period, indicating a diminishing influence of the layer/substrate interface on the growth processes.     

Comparison of the PIC model and the Lie algebraic method in the simulation of intense continuous beam transport

Both the PIC (Particle-In-Cell) model and the Lie algebraic method can be used to simulate the transport of intense continuous beams. The PIC model is to calculate the space charge field, which is blended into the external field, and then simulate the trajectories of particles in the total field; the Lie algebraic method is to simulate the intense continuous beam transport with transport matrixes. Two simulation codes based on the two methods are developed respectively, and the simulated results of transport in a set of electrostatic lenses are compared. It is found that the results from the two codes are in agreement with each other, and both approaches have their own merits.     

A new beam asymmetry measurement from pion photoproduction on the neutron using CLAS

We present a preliminary analysis of the photon beam asymmetry observable （Z） from the pho- toproduction reaction channel γn → pπ in the invariant mass range 1.6--2.3 GeV. The measurement was obtained using the near-4π CEBAF Large Acceptance Spectrometer （CLAS） at Jefferson Laboratory, USA, employing a linearly polarised photon beam with an energy range 1.1 2.3 GeV, incident on a liquid deuterium target. The measurement will provide new data to address the poorly established neutron excitation spectrum and will greatly expand the sparse world data-set both in energy and angle.     

红外探测装置中光谱分光镜的设计与制备

在红外探测装置中,光谱分光镜是用来把3 μm～5 μm和8 μm～12 μm 2个波段的光谱分开的零件.介绍了一种在通用镀膜机上制备光谱分光镜的新工艺.在该膜系的设计过程中,把Willey公式引入到对其平均透过率最高值进行估算的过程中,同时针对国产镀膜机控制精度不高的特点,尽量使用规整膜层进行设计.为了进一步提高8 μm～12 μm波段的透过率,在膜系的最外侧引进了一层自行配制的低折射率氟化物材料,制备出了符合技术指标的红外光谱分光镜.     

Study on CYCIAE-100 radiation field and residual radioactivity

The accelerators should be properly designed to make the radiation field produced by beam loss satisfy the dose limits. The radiation field for high intensity H- cyclotron includes prompt radiation and residual radiation field. The induced radioactivity in accelerator components is the dominant source of occupational radiation exposure if the accelerator is well shielded. The source of radiation is the beam loss when cyclotron is operating. In this paper, the radiation field for CYCIAE-100 is calculated using Monte Carlo method and the radioactive contamination near stripping foil is studied. A method to reduce the dose equivalent rate of maintenance staff is also given.     

双棱镜干涉实验难点解析

总结了双棱镜干涉实验的调整难点及原因。提出解决的措施并对要点进行研究分析,收到良好效果。提出评价学生调整光路质量的方法。     

397 GHz斜注管互作用系统的设计模拟

斜注管是返波振荡器的一种,通过电子注的倾斜,电子距离慢波结构更近,高频场更强,耦合阻抗和互作用效率更高,显著增加输出功率。对带状注斜注管的互作用系统进行了设计,并首次将双排齿慢波结构应用于斜注管。利用电磁模拟软件和3D粒子模拟软件对设计的斜注管的色散曲线和场分布进行了分析,并对其注-波互作用进行了模拟,可以得到大于100 mW的输出功率以及50 GHz的调谐带宽。输出功率在370.5 GHz频点处处达到峰值2.3 W,电子注电压7.0 kV,注电流120 mA,聚焦磁场1.0 T。     

电子辐照下聚合物介质深层充电现象研究

空间辐射环境中,聚合物介质的深层充放电效应是威胁航天器安全的重要因素之一.文中在Chudleigh和von Berlepsch所发展的电位衰减模型基础上引入传输电流项,考虑了电子入射引起的感应电导率和感应电场的影响,提出了新的分析研究介质材料深层充电规律和特征的模型.通过该模型,分析了不同辐射条件下介质的表面电位、内部电荷与电场分布的变化,并设计实验及援引其他实验数据对模型分析结果进行验证.分析和实验结果表明,聚合物介质在深层充电过程中的平衡电位随着入射电子束流强度和介质电阻率的增加而增大,决定深层充电平 关键词： 深层充电 电荷传输模型 电子束 聚合物     

Design of Hamming Code Checker Using Titanium-Diffused Lithium Niobate-Based Waveguide

ABSTRACT

This work presents an electro-optic effect-based design for the widely used Hamming code for checking single bit errors in the received data. The structure is based on Mach-Zehnder Interferometer, designed using Titanium-diffused Lithium Niobate-based waveguides. The proposed device has been successfully tested using the beam propagation method. For a received 7-bit code, the three simultaneously generated check bits are combined to check the error position. Critical performance parameters like extinction ratio (24.39dB), contrast ratio (25.711dB), insertion loss (0.041dB), and amplitude modulation (0.079dB) calculated for the overall device are within acceptable limits for the feasibility of the device.