Diffusion in organic solvents: Interdiffusion coefficient of 1,1,2,2-tetrabromoethane

Interdiffusion coefficient have been measured for 1,1,2,2-tetrabromoethane in 21 organic solvents in order to ascertain the influence of shape, size, viscosity, nature and degree of branching, of the solvent molecules on transport properties. None of the existing correlations for diffusion in binary liquid systems appear to fit all the experimental data. Steric effects due to the solvent molecules are shown to be very important in the interpretation of the diffusion process.     

ORGANIC CHELATING REAGENT ON REDOX ADSORPTION OF ACTIVATED CARBON FIBER TOWARDS Au^3+

Organic chelating reagent influences upon the redox adsorption of activated carbon fibertowards Au3- were systematically investigated. The experimental results indicated that the presenceof organic chelating reagent on activated carbon fiber strongly affects adsorption capacity ofactivated carbon fiber towards Au3+. The reduction-adsorption amount of Au3+ increased three timesby the presence of 8-quinolinol. Furthermore, The reduction-adsorption amount of Au3+ depended onthe pH value of adsorption and temperature.     

Microheterogeneity in aqueous-organic solutions: Heat capacities,volumes and expansibilities of some alcohols,aminoalcohol and tertiary amines in water

The heat capacities per unit volume and the densities of aqueous solutions of 2-propanol, neopentanol, tert-amylalcohol, 2-amino-2-methylpropanol, triethylamine and diethylmethylamine were measured, in many cases as a function of temperature, over the whole mole fraction or solubility range. Apparent and partial molal heat capacities, volumes and expansibilities were derived. The concentration dependence of these functions suggest the existence of transitions in some of these systems, in the water-rich region, qualitatively similar to micellization. The large relaxation contribution observed with some of the thermodynamic functions of hydrophobic alcohols and amines suggests a reinforcement of hydrophobic hydration due to strong hydrogen-bonding interactions of the polar groups with water.     

PBO纤维的合成及其微观结构

聚对苯撑苯并双唑 (PBO)纤维是一种高强度、高模量、高热稳定性、高耐化学腐蚀性的新型纤维。着重介绍了PBO纤维的合成工艺、纺丝工艺 ;并对PBO的微观结构形态和表征方法进行了综合评述。     

磷钨钼钒杂多蓝光度法测定钼的探索

本文研究了磷钨钼钒四元杂多酸及其还原产物杂多蓝的形成条件、光度性质、组成和在测定高速钢中高钼的应用。试验表明,磷钨钼钒杂多蓝光度法测定钼具有新颖性、高选择性、较高准确性和简便性,适于高速钢中>1％Mo的测定。     

Tree-gel and loop-gel conversions in nonlinear polymerization

Ａｓｉｓｗｅｌｌｋｎｏｗｎ,ｔｈｅｔｈｅｏｒｙｆｏｒｎｏｎｌｉｎｅａｒｐｏｌｙｍｅｒｉｚａｔｉｏｎｓｗａｓｉｎｉｔｉａｔｅｄｂｙＦｌｏｒｙａｎｄＳｔｏｃｋｍａｙｅｒ[1—3].ＭｉｌｌｅｒａｎｄＭａｃｏｓｋｏ[4—6]ｐｒｏｐｏｓｅｄａｒｅｃｕｒｓｉｖｅｍｅｔｈｏｄｆｏｒｄｅａｌｉｎｇｗｉｔｈｔｈｅｐｒｏｂｌｅｍｏｆｔｈｅｐｏｓｔｇｅｌｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅｎｅｔｗｏｒｋｆｏｒｍｉｎｇｐｏｌｙｍｅｒｉｚａｔｉｏｎ.Ｓｔｅｐｔｏ[7]ｉｎｖｅｓｔｉｇａｔｅｄｔｈｅｇｅｌｇｅｌｒｅａｃｔｉｏｎｏｆＲＡｆｔ…     

Dynamic Interfacial Tension Behavior of Water/Oil Systems Containing In situ-Formed Surfactants

Time-dependent interfacial tension (IFT) has been investigated for an interfacially reactive immiscible system composed of model-acidified oil and alkaline water. The acidified oil was composed of either lauric acid or linoleic acid dissolved in n-dodecane. Drop volume tensiometry was employed to measure the interfacial tension between the two phases. In the case of lauric acid, the IFT value was found to decrease sharply with increasing alkali concentration, even at low drop formation times. In the case of linoleic acid, the IFT decrease with the drop formation time was more gradual, especially at low alkali concentration. The rate of formation of the interfacial area was also found to be dependent on alkali concentration.     

Mesoporous Titanium-containing Silicas. Synthesis and geometrical characteristics

Mesoporous titanium-containing silicas with TiO₂ contents from 1 up to 70 mol% were prepared. The obtained samples have been characterized by the powder X-ray diffraction data, the diffuse reflectance infrared Fourier transform method, and nitrogen adsorption at 77 K. Specific surface area, total pore volume, distribution pore volume on pore sizes were determined from nitrogen adsorption isotherm for synthesized titanosilicas. This revised version was published online in August 2006 with corrections to the Cover Date.     

Electrokinetic and contact angle measurements of grafted carbon fibers

 The grafting method that has successfully been applied to methacrylic acid and liquid crystalline monomers was expanded to prepare amphoteric carbon fiber surfaces using 2-(N,N-dimethylamino)ethyl methacrylate as monomer. The obtained carbon fiber surfaces were characterized by contact angle and ζ-potential measurements. The expected basic behavior was not observed, instead an amphoteric character of the modified carbon fiber surface was found. The fiber surfaces display a basic character in the acidic pH-range, while they are acidic in the alkaline part of the pH-scale. An important influence is derived from the amount of initiator used to graft the monomers onto the fibers. The smaller the initiator concen-tration used during polymerization, the larger the amount of amino functionalities introduced to the carbon fiber surface. The wetting behavior versus water depends on the overall conformation of the immobilized polymer. During immersion into water the polymer acts hydrophobic, while during emersion, a hydrophilic character is observed, probably derived from conformational changes and swelling during the contact angle measure-ments in water. Received: 9 June 1998 Accepted: 13 August 1998     

Densities and Apparent Molar Volumes of Aqueous NaNO3 Solutions at Temperatures from 292 to 573 K and at Pressures Up to 30 MPa

Densities of four aqueous NaNO₃ solutions (0.100, 0.303, 0.580, 0.892 mol-kg^–1 H₂O) have been measured in the liquid phase with a constant-volume piezometer immersed in a precision liquid thermostat. Measurements were made at ten isotherms between 292 and 573 K. The range of pressure was 0.1–30 MPa. The total uncertainty of density, pressure, temperature, and concentration measurements were estimated to be less than 0.06%, 0.05%, 10 mK, and 0.014%, respectively. Values of saturated densities were determined by extrapolating experimental P- data to the vapor pressure at fixed temperature and composition. Apparent molar volumes were derived using measured values of density for the solutions and for pure water. The apparent molar volumes were extrapolated to zero concentration to yield partial molar volumes at infinite dilution. The temperature, pressure, and concentration dependence of partial and apparent molar volumes were studied. The measured values of density and apparent and partial molar volume were compared with data reported in the literature.