10MW串级脉冲发电机的理论、设计、实验及应用研究

 脉冲发电机具有小型、机动、灵活、可靠、寿命长等特点, 作为高功率固体激光器和加速器电源是一新的技术路线。比较了各种类型脉冲电源的性能指标,解释了旋转磁通压缩和串级原理,提出串级脉冲发电机的自激、偏极与双机同壳概念,给出电机的设计公式,10MW串级脉冲发电机的设计、实验及在强激光与粒子束领域中的潜在应用。     

Benzothiadiazole-based Conjugated Polymers for Organic Solar Cells

Benzothiadiazole(BT) is an electron-deficient unit with fused aromatic core, which can be used to construct conjugated polymers for application in organic solar cells(OSCs). In the past twenty years, huge numbers of conjugated polymers based on BT unit have been developed,focusing on the backbone engineering(such as by using different copolymerized building blocks), side chain engineering(such as by using linear or branch side units), using heteroatoms(such as F, O and S atoms, and CN group), etc. These modifications enable BT-polymers to exhibit distinct absorption spectra(with onset varied from 600 nm to 1000 nm), different frontier energy levels and crystallinities. As a consequence, BT-polymers have gained much attention in recent years, and can be simultaneously used as electron donor and electron acceptor in OSCs, providing the power conversion efficiencies(PCEs) over 18% and 14% in non-fullerene and all-polymer OSCs. In this article, we provide an overview of BTpolymers for OSCs, from donor to acceptor, via selecting some typical BT-polymers in different periods. We hope that the summary in this article can invoke the interest to study the BT-polymers toward high performance OSCs, especially with thick active layers that can be potentially used in large-area devices.     

一种蓝色聚合物激光材料

聚合物作为一种有机发光材料,由于在平板显示和光电子器件中的良好应用前景而受到广泛研究［１～２］．近年来,一个重要进展是在聚合物中观测到了受激发射（简称Ｐｏｌｙ－ｍｅｒ激光）现象［３～６］．Ｐｏｌｙｍｅｒ激光最早是在溶液中实现的［３～４］．作为一种新型...     

脉冲高功率离子二极管的动力学模拟

基于等离子体的爆炸发射模型,利用自洽的2.5维的胞中粒子（PIC）模拟程序MAGIC模拟了平板型磁绝缘离子二极管中电子和质子的动力学特性。给出了电压为300kV,外加磁场为2倍临界磁场情况下的二极管特性,阴阳极间隙中带电粒子的空间和相空间分布,以及净电荷密度分布和电场分布,结果表明,引出束流密度比单离子Child-Langmuir公式计算的结果大5倍;外加磁场导致在阴极附近形成虚阴极。空间电荷使得阴阳极间隙中电场扰动和增强。     

光阴极注入器型能量回收射频加速器

光阴极注入器型能量回收射频加速器（PERL）是新一代加速器,在高平均功率自由电子激光和下一代高亮度光源等研究中有很好的应用前景。分析了PERL的强流与高平均功率特性,对注入器输出束流品质的要求及光阴极注入器、超导加速腔等关键技术进行了研究,设计分析了一种特殊结构的高压DC Gun光阴极注入器,能有效地提高DC加速腔中的加速场强,当高压为1MV和加速场达到10MV/m时,产生的电子束流能够基本满足PERL应用要求。同一超导加速段中的束流加速和能量回收的数值模拟计算结果表明,能获得高效率电子束流能量回收效果。     

预脉冲对相对论磁控管工作性能的影响分析

在阐述预脉冲产生的基础上,分析了预脉冲带来的一系列影响,包括工和电压波形变化,提前生成等离子体,以及预脉冲阶段放大竞争模式等,这些影响与相对论磁控管起振工作频率相联系,从而直接造成了相对论磁控管的基本性能参数,如脉宽、工作频率及输出功率等变化。结合具体实验,对比了有、无预脉冲条件下相对论磁控管工作性能的差异,对预脉冲的影响因素与相对论磁控管性能之间的联系进行了详细的分析。     

柱几何Rayleigh-Taylor不稳定性的数值模拟

给出了柱几何中流体力学方程组及其在数值模拟中采用的计算方法。对二维柱几何Rayleigh-Taylor不稳定性进行数值模拟,在线性阶段与线性理论符合得很好;不稳定性增长进入非线性区域的阈值依赖于界面的位置,并且明显不同于平面情况。     

Effect of graft polymer prepared by living radical polymerisation on electro-optical properties of polymer dispersed liquid crystal

In this study, a graft polymer matrix prepared by living radical polymerisation had been incorporated into polymer dispersed liquid crystals (PDLCs). The electro-optical properties of the PDLCs were investigated. The results showed that the length and density of graft chain had a great influence on the memory effect of the PDLCs. Low-driving-voltage and weak-memory-effect PDLCs could easily be obtained with a graft polymer matrix.     

Modified null field method for P- and SV-wave scattering from a partially debonded fiber

The modified null field approach to elastic P- and SV-wave scattering (in plane strain) from a partially debonded fiber has been developed. The debonded region on the fiber surface is subjected to traction free boundary conditions, whereas the fiber is assumed to be in welded contact with the host medium elsewhere. Additional null field equations for an elliptical extension of the actual surface of the scatterer are introduced which require additional expansions for the field in the region between the extended mathematical boundary and the actual boundary of the scatterer. The numerical accuracy of the modified null field method has been tested for the case of a perfectly bonded fiber for P- and SV-wave incidence. Scattering cross-section plots are presented for different degrees of debonding.     

Preparation of modified polymer blend and electrical performance

In this study, a modified binary polymer blend made up of polycarbonate and polystyrene blend has been prepared by loading of aluminum oxide (Al₂O₃) as a dopant. The role of alumina with polymer blend system was addressed in view of interfacing criteria. The filler concentration of modified blend was taken as 5, 10, and 15%. The morphological, thermal, and electrical properties were characterized by various techniques. Optical microscopy confirms the homogenous dispersion of Al₂O₃ in blend. The presence of alumina was detected by subatomic level using atomic force microscope (both two and three dimensional approach). The differential scanning calorimetric thermographs demonstrate decreasing softing point as function of alumina loading. The dielectric properties such as dielectric constant, loss, and electrical modulus were studied under DC bias. The effect of DC bias exhibits significant changes at low amount of Al₂O₃. The dielectric polarization supports Maxwell Wagner (MW) theory due to low frequency response. 15% Al₂O₃ gives the highest dielectric constant (ε′) value (3.5?×?10⁵) at 10 Hz. The polymer modified blend with Al₂O₃ may be used as a one of the best dielectric medium.