The influence of a transverse magnetic field on a subnormal glow discharge in air

In subnormal glow discharge under d.c. excitation at different pressure in a varying transverse magnetic field (0 to 30 G) some measurements have been carried out for various initial average tube currents. The voltage across the discharge increases and average tube current and residual current decreases in the magnetic field. With the help of Beckman’s expression [4] for the axial field and the electron density distribution in a transverse magnetic field the observed variation of current and voltage can be satisfactorily explained. The variation of axial electric field with transverse magnetic field can be represented to a fair degree of accuracy by the derived equation. The behaviour of residual current with magnetic field has been observed in these oscillations.     

Influence of the electric characteristics of II–VI semiconductor material on the electroluminescence of lanthanide complex

The organic-inorganic combined structural device (ITO/PVK:Eu/ZnS/Al) is fabricated based on layered optimization scheme. II–VI semiconductor material ZnS is acted as an electron function (transporting and acceleration) layer. The hot electrons which have been accelerated in the ZnS layer directly impact excitation europium ions through resonant energy transfer and then recombine with injected holes to form excitons in PVK or EuTTA₂(N-HPA)Phen. Europium (Eu) ions may also be excited by intramolecular energy transfer from ligands. There are two kinds of excitation mechanisms: impacted excitation and injected recombination for the combined structural device. The electroluminescence (EL) intensity of the combined structural device is strongly improved and reaches up to 381 cd/m² at 20 V compared with the pure organic structural device. It may be an effective method to improve the EL intensity of the lanthanide complex by using electric characteristics of inorganic semiconductor materials.     

强流中性源的供电系统

本文简要介绍了7×35cm~2多灯丝大面积源的供电保护系统,给出了该系统的基本设计思想,电源简化原理图及主要电路特点和已达到的技术指标。     

高频金融数据的标度分析

高频金融数据通常具有尖峰厚尾的非正态特征，常用稳定分布来拟合。本文采用稳定分布的性质对高频上证指数收益率的分布作了标度分析，求得特征指数为1．48，说明我们在分析证券指数分布时可以用稳定分布，而非正态分布。     

Hotel Performance in the UK: The Role of Information Entropy in a Novel Slack-Based Data Envelopment Analysis

Previous hotel performance studies neglected the role of information entropy in feedback processes between input and output management. This paper focuses on this gap by exploring the relationship between hotel performance at the industry level and the capability of learning by doing and adopting best practices using a sample of 153 UK hotels over a 10-year period between 2008–2017. Besides, this research also fills a literature gap by addressing the issues of measuring hotel performance in light of negative outputs. In order to achieve this, we apply a novel Modified slack-based model for the efficiency analysis and Least Absolute Shrinkage and Selection Operator to examine the influence of entropy related variable on efficiency score. The Results indicate that less can be learnt from inputs than from outputs to improve efficiency levels and resource allocation is more balanced than cash flow and liquidity. The findings suggest that market dynamics explains the cash flow generation potential and liquidity. We find that market conditions are increasingly offering the opportunities for learning and improving hotel efficiency. The results report that the distinctive characteristic of superior performance in hotel operations is the capability to match the cash flow generation potential with market opportunities.     

Currents in a Quantum Nanoring Controlled by Non-Classical Electromagnetic Field

Quantum ring accommodating interacting spin-less fermions threaded by magnetic flux with a non-classical component added to a static, inducing persistent current, is considered. It is investigated how current flowing in the ring becomes affected by a state of non-classical flux and how Coulomb interaction between fermions influences entanglement of quantum ring and the driving field. In particular it is shown that in an absence of decoherence and under certain conditions fermion–fermion interaction is necessary for a ring–field entanglement to occur.     

多周期激光相位对H2+谐波频移的影响

理论研究了多周期激光相位角对H2+谐波频移的影响。结果表明,在多周期激光驱动下H2+谐波光谱在零相位时呈现蓝移现象。随着激光相位增大,谐波光谱由蓝移转向红移。随着激光相位进一步增大,谐波红移减弱。理论分析表明谐波频移是由激光上升和下降区域谐波辐射强度变化引起的。并且谐波辐射强度变化对激光相位比较敏感。     

Experimental investigation on tunnel sonic boom

Upon the entrance of a high-speed train into a relatively long train tunnel, compression waves are generated in front of the train. These compression waves subsequently coalesce into a weak shock wave so that a unpleasant sonic boom is emitted from the tunnel exit. In order to investigate the generation of the weak shock wave in train tunnels and the emission of the resulting sonic boom from the train tunnel exit and to search for methods for the reduction of these sonic booms, a 1300 scaled train tunnel simulator was constructed and simulation experiments were carried out using this facility.In the train tunnel simulator, an 18 mm dia. and 200 mm long plastic piston moves along a 40 mm dia. and 25 m long test section with speed ranging from 60 to 100 m/s. The tunnel simulator was tilted 8° to the floor so that the attenuation of the piston speed was not more than 10 % of its entrance speed. Pressure measurements along the tunnel simulator and holographic interferometric optical flow visualization of weak shock waves in the tunnel simulator clearly showed that compression waves, with propagation, coalesced into a weak shock wave. Although, for reduction of the sonic boom in prototype train tunnels, the installation of a hood at the entrance of the tunnels was known to be useful for their suppression, this effect was confirmed in the present experiment and found to be effective particularly for low piston speeds. The installation of a partially perforated wall at the exit of the tunnel simulator was found to smear pressure gradients at the shock. This effect is significant for higher piston speeds. Throughout the series of train tunnel simulator experiments, the combination of both the entrance hood and the perforated wall significantly reduces shock overpressures for piston speeds ofu _p ranging from 60 to 100 m/s. These experimental findings were then applied to a real train tunnel and good agreement was obtained between the tunnel simulator result and the real tunnel measurements.     

Contribution to vapor generation-inductively coupled plasma spectrometric techniques for determination of sulfide in water samples

Vapor generation-inductively coupled plasma-optical emission spectrometry was used for the determination of sulfide in water samples preserved by the addition of a zinc acetate and sodium hydroxide solution. Hydrogen sulfide and acid-volatile sulfides were transformed, by acidification, to a gaseous phase in a vapor generator and subsequently detected by inductively coupled plasma optical emission spectrometry. Compounds interfering with iodometric titration and spectrophotometric determination were examined as potential chemical interferents. The proposed method provides results comparable to iodometric titration in the tested concentration range 0.06-22.0 mg L⁻¹. Limit of detection for the determination of hydrogen sulfide by this method is 0.03 mg L⁻¹.     

Determination of total arsenic in seawater by hydride generation atomic fluorescence spectrometry

In this work, the determination of total As in seawater by hydride generation atomic fluorescence spectrometry was studied. The influence of the chemical, flow and instrumental parameters were investigated and optimized. The pre-reduction of As(V) to As(III) was performed using KI plus ascorbic acid in 3.5 mol L^− 1 HCl medium. No multiplicative interference was present and external aqueous calibration could be used. The limit of detection was 36 ng L^− 1, while the repeatability was 2% (n = 10), at a 500 ng L^− 1 concentration level. The sample throughput was 15 h^− 1 if triplicate measurements were made. The accuracy was assessed by the analysis of a seawater certified reference material and excellent agreement between the obtained and certified values was verified. The procedure was used for the analysis of seawater offshore samples collected at the Brazilian coast and results ranging from 860 to 1200 ng L^− 1 were found.