单壁碳纳米管的SERS研究

本文通过改进实验方法,将单壁碳纳米管的乙醇溶液与金胶混合并制作成固体薄膜,使单壁碳纳米管夹裹在金纳米粒子之间,保证了吸附的紧密性,获得了高质量的单壁碳纳米管SERS光谱。不但观测到文献中报道的径向呼吸振动模(RBM)和C-C正切拉伸模(GM)的增强,还在1100-1500cm-1区域观测到一组新峰,其峰形完整并有相当的强度。这些峰在现有的文献中几乎没有报导。文章对这组新峰的出现进行了初步的分析。     

Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Asymptotic Methods Applied to Contact Problems

Asymptotic methods for contact problems are expounded. Some typical integral equations are considered     

Quantitative evaluation of two-dimensional dynamic deformations using digital holography

An optical system for the parallel evaluation of in- and out-of-plane dynamical deformations will be described. A double pulse laser with pulse separation in the microsecond range is used for the investigations. Two separate interferograms of an object under test, in its undeformed and deformed state, are recorded in a few microseconds. The object is illuminated from two different directions and imaged onto a CCD sensor. This produces two sensitivity vectors. The reference beams have different directions in order to produce two directional spatial carriers. The Fourier method is used for quantitative evaluation, and the measurements along different sensitivity vectors are separated in the Fourier domain. The phases of the two interferograms are obtained from the complex amplitudes and the two dimensional deformation is calculated from the phases. Experimental results are presented.     

利用排列熵检测近40年华北地区气温突变的研究

运用一种新的动力学突变检测方法——排列熵(permutation entropy，PE)算法，计算并分析了中国华北地区52个站点1960年—2000年逐日平均气温资料的排列熵演化情况，发现中国华北地区气温在20世纪70年代中期、80年代初均发生了较大突变；进一步用经验模态分解(empirical mode decomposition，EMD)方法对排列熵序列进行逐级平稳化处理，结果发现这一地区的气温突变与准10年这一年代际时间尺度的周期变率密切相关，其原因与太阳黑子活动有着密切联系. 关键词： 华北 突变 排列熵算法 经验模态分解     

核磁共振成像一维空间编码教学实验

利用梯度磁场实现检测信号的空间编码,是核磁共振成像(MRI)的关键技术.本文采用ccc系列样品将二维问题简化为一维,使用超小型教学用核磁共振成像仪进行了一维空间编码实验研究,并对实验过程及实验结果进行了计算模拟和分析.     

双面金属包覆介质波导模序数的判别方法

在双面金属包覆介质波导中 ,随着介质层厚度的变化 ,会出现TM0 模与TM1 模的分离和简并两种状态 ,从而影响衰减全反射 (ATR)谱中模序数的确认。通过对金属波导的理论分析和实验研究 ,提出了三种模序数确认方法 :本征角计算法、吸收峰全峰半宽比较法和吸收峰峰间距比较法 ,实现了两种状态下对模序数的准确判断     

Simultaneous Measurement of Particle Size and Particle Velocity by the Spatial Filtering Technique

The objective of this study was to compare the measuring results of a fiber‐optical probe based on a modified spatial filtering technique with given size distributions of different test powders and also with particle velocity values of laser Doppler measurements. Fiber‐optical spatial filtering velocimetry was modified by fiber‐optical spot scanning in order to determine simultaneously the size and the velocity of particles. The fiber‐optical probe system can be used as an in‐line measuring device for sizing of particles in different technical applications. Spherical test particles were narrow‐sized glass beads in the range 30–100 μm and irregularly shaped test particles were limestone particles in the range 10–600 μm. Particles were dispersed by a brush disperser and the measurements were carried out at a fixed position in a free particle‐laden air stream. Owing to the measurement of chord lengths and to the influence of diffraction and divergent angle, the probe results show differences from the given test particle sizes. Owing to the particle‐probe collisions, the mean velocity determined by the probe is smaller than the laser Doppler mean velocity.     

二极管激光侧泵浦单横模100Hz电光调Q激光器

介绍了二极管激光侧泵浦单横模１００Ｈｚ电光调Ｑ激光器的实验结果。泵浦源为一个线阵准连续１００Ｗ二极管激光器，激光工作介质为ＮｄＹＡＧ薄梯形板条，板条与泵浦源间用柱透镜耦合，ＫＤ＊Ｐ电光晶体调Ｑ。在１００Ｈｚ重复频率下，获得单脉冲能量２．３７ｍＪ，脉宽小于７ｎｓ，光束质量因子Ｍ２＝１．１的１．０６μｍ激光，光－光效率为８．５％，斜效率为１８．７％。