Algorithms for finding proper essential surfaces in 3-manifolds

In this paper, we present an algorithm which, for a given compact orientable irreducible boundary irreducible 3-manifold M, verifies whether M contains an essential orientable surface (possibly, with boundary), whose genus is at most N. The algorithm is based on Haken’s theory of normal surfaces, and on a trick suggested by Jaco and consisting in estimating the mean length of boundary curves in an unknown essential surface of a given genus in the given manifold.     

利用谱线宽度测人发中的微量元素

通过实验证明了可以利用谱线宽度做永久工作曲线用于光谱定量分析。给出了用于测量人发中微量元素Ｃｕ，Ｚｎ，Ｆｅ和Ｃａ的永久工作曲线，利用这些工作曲线对实际样品进行了测定，所得结果与用ＩＣＰ－ＡＥＳ测得的结果相吻合。     

On the reliability of unsaturated hydraulic conductivity calculated from the moisture retention curve

In comparison with direct measurements of unsaturated hydraulic conductivity, the methods of calculations from the moisture retention curve are attractive for their fast and simple use and low cost. These are the main reasons for their increasing use, mainly in spatial variability studies. On the other hand, it is known that their applicability is limited. The possibility of the use of the retention curve to indirectly determine hydraulic conductivities is analyzed as follows. The theoretical derivation of the relationK(h) – (h) is briefly discussed with regards to potential sources of inaccuracy. The sensitivity of the algorithm forK(h) calculation is studied as a response to possible inaccuracies in the retention curve determination. Conclusions about the usability of calculated hydraulic conductivities are drawn.     

The Büttiker-Landauer model generalized

Büttiker and Landauer studied scattering off an oscillating rectangular barrier in order to shed light on the time aspects of tunneling. The expression for the traversal time resulting from this study is controversial. In addition, doubts have recently been expressed on technical aspects of their work. In an attempt to clarify these issues, we investigate a generalization of their model to arbitrary oscillating barriers,V(x, t)=V ₀(x)+V ₁(x)cos t. In the process, we confirm that Büttiker and Landauer's work is technically sound. However, we show, by several examples, that no direct general relation exists between the characteristic frequency of an oscillating barrier and the duration of the tunneling process. For a wide range of realistic parameters this characteristic frequency does not even exist.This paper is dedicated to E. G. D. Cohen.     

钢中Si、Mn的电子探针定量分析与标样

采用特制的Fe-Si、Fe-Mn合金系列标样，用电子探针测定了钢或铁基合金中低含量的Si和Mn元素、与用纯元素作标样、经ZAF修正的结果相比较，提高了分析准确度．     

克拉霉素漂浮-生物粘附微囊的制备及性能研究

选用乳化-溶剂挥发法制备乙基纤维素载药微球(EMs), 并通过内部凝胶化法进行包衣制得海藻酸钠-乙基纤维素载药微囊(AEMs), 最后通过离子交联法进一步包衣制得壳聚糖-海藻酸钠-乙基纤维素载药微囊(CAEMs). 研究克拉霉素漂浮\|生物粘附微囊的制备工艺, 并考察微囊的体外漂浮性能、 粘附性能及体内滞留性能. 结果表明, CAEMs球形度较好, 药物包封率为72.3%~78.2%, 载药量为7.1%~12.7%. 在pH=5的醋酸缓冲液中, 6 h时的累积释放率为56.6%~70.6%, 漂浮率大于70%, 4 h时的体内滞留率为60.5%. CAEMs有望通过延长药物胃内滞留时间, 在临床用于根除幽门螺旋杆菌, 从而降低消化道溃疡的复发率.     

沸石中阳离子对氮/氧吸附性能影响的研究进展

基于制氧吸附剂在变压吸附空分制氧工业应用的重要性，从沸石分子筛的氮／氧吸附性能方面，介绍了低硅沸石LSX、钙沸石、锂沸石、锂银沸石等的研究进展。讨论了沸石分子筛骨架结构和其中阳离子的种类、位置、数量与其吸附特性的关系，探讨其在变压吸附空分制氧中的应用前景。     

Averaged molecular weight of complex mixtures as determined by rapid measurements of diffusion

Summary The concept of a diffusion-averaged molecular weight, M_d is presented, and M_d is defined for polydisperse samples. It is shown via oligostyrene mixtures that M_d can be determined in 20 minutes with common chromatographic equipment. If M_d is measured and M_n or M_w is known, the polydispersity can be obtained.     

二组分混合物的最小流化特性 Ⅰ.混合/分离状态与最小流化空隙率

分析了二组分混合物的３种混合／分离状态及在完全混合时发生连续相转变的极限组成。提出一个判别非等密度体系混合／分离状态的法则与确定混合物空隙率简易可行的随意松散堆积方法。     

低共熔混合锂盐相图的绘制及应用

采用热分析法对不同组成的混合锂盐二元体系进行研究, 绘制了混合锂盐体系的步冷曲线和T-x相图, 结果表明体系均为具有最低共熔点的二元体系. LiOH-LiNO3、LiOH-LiCl、LiOH-Li2CO3及LiNO3-LiCl体系的最低共熔点分别为175.7、294.5、418.2及221.6 ℃. 利用低共熔混合物LiNO3-LiOH为锂盐与不同前驱体反应, 制备出了层状结构良好的锂离子电池正极材料LiNiO2、LiNi0.8Co0.2O2及LiNi1/3Co1/3Mn1/3O2. X射线衍射分析表明, 合成的材料具有规整的层状NaFeO2结构, 且XRD衍射峰强度之比I(003)/I(104)>2.0, 电性能测试表明, 在2.7-4.3 V(vs Li/Li+)的电压范围内进行0.1C倍率充放电, LiNiO2、LiNi0.8Co0.2O2、LiNi1/3Co1/3Mn1/3O2首次充电比容量分别达168.0、225.4、194.0 mAh·g-1, 放电比容量分别为138.4、165.8、157.7 mAh·g-1.