Trace Spectrophotometric Determination of Dichlorvos using Diphenyl Semicarbazide (DPC) in Environmental and Agricultural Samples

A new and highly sensitive spectrophotometric method is developed for the determination of sub ppm levels of the widely used organophosphorus insecticide dichlorvos. The method is based on alkaline hydrolysis of dichlorvos to dichloroacetaldehyde followed by coupling with diphenyl semicarbazide (DPC) in alkaline medium. The absorption maxima of the wine red dye compound formed is measured at 490 nm. Beer's law is obeyed over the concentration range of 4.3 to 34 μg in a final solution volume of 25 mL (0.18–1.36 ppm). The molar absorptivity, Sandell's sensitivity and correlation coefficient were found to be 2.9 × 10⁵ l mole^?1 cm^?1, 0.013 μg cm^?2 and 0.9999, respectively. The standard deviation and relative standard deviation were found to be ± 0.007 and 1.90%, respectively. The lower limit of detection is 0.04 μg. The method is simple, sensitive and free from interferences of other pesticides and diverse ions. Other organophosphorous pesticides do not interfere with the proposed method. The method has been satisfactorily applied to the determination of dichlorvos in environmental and agricultural samples.     

Useful dual Diels-Alder behavior of 2-azetidinone-tethered aryl imines as azadienophiles or azadienes: a beta-lactam-based stereocontrolled access to optically pure highly functionalized indolizidine systems

Imines derived from 4-oxoazetidine-2-carbaldehydes have been found to be versatile Diels-Alder reagents in that they exhibit two reactivity patterns. 2-Azetidinone-tethered imines undergo diastereoselective reaction with Danishefsky's diene in the presence of different Lewis acids. The effect of the amount of catalyst on the conversion rate as well as on the product ratio has been studied. Under standard reaction conditions, indium(III) chloride and zinc(II) iodide provided the best yields, and indium(III) triflate the highest diastereoselectivity in the Lewis acid promoted aza-Diels-Alder cycloaddition. Treatment of the aforementioned imines with cyclopentadiene, 2,3-dimethyl-1,3-butadiene or 3,4-dihydro-2 H-pyran led to cycloadducts arising from inverse electron-demand condensation involving the beta-lactam-tethered aryl imine as the heterodiene component. In addition, the first methodology for preparing indolizidines from beta-lactams has been developed. This process involves amide bond cleavage of the beta-lactam ring in the aza-Diels-Alder cycloadducts with concomitant cyclization. Full chirality transfer occurs when the reaction is performed with an enantiomerically pure substrate.     

An integrated coupled column liquid chromatography system for the determination of leukotriene metabolites in biological samples

Summary A fully integrated chromatographic system was developed for the determination of leukotrienes in biological samples using photodiode-array detection (PDAD), which eliminates time consuming manual sample handling steps. A special solid phase extraction, (SPE) methodology for leucotriene metabolite stability was developed which increased the recoveries and eliminates the contamination risk of biological samples. The inherent instability (autooxidation) of many of the leukotriene mediators, and the adsorption effects onto exposed surfaces in vials and in the chromatographic system were found to be very important parameters to control in order to circumvent high loss of sample analytes. By binding the cell supernatants to the functionalities of the SPE support stabilised these mediators. Cell culture samples were eluted through a disposable C₁₈ SPE column. The SPE columns were allowed to thaw and deposited in an automated sample handling unit (ASPEC XL). Desorption of the analytes was followed by a second on-line SPE step, to eliminate remaining interfering matrix compounds. Typical recoveries when stored at −70°C were in-between 55–97% except for (LTE₄) which was found to be around 40% after 72 days of storage. Seven reversed-phase packings were studied. Selectivity factors, as well as the separation efficiencies, were found to differ for the various C₁₈ bonded silica stationary phases. This integrated on-line column liquid chromatographic system was applied to the determination of leukotriene B₄, leukotriene C₄, leukotriene D₄, leukotriene and E₄ in human cell extracts using prostaglandin B₂ as the internal standard. More than 1500 biological samples were analysed. Some validation data are presented for unattended operations.     

Simultaneous Determination of Various Classes of Pesticides Using Micellar Electrokinetic Capillary Chromatographyin Combination with Solid-Phase Extraction

The potential of micellar electrokinetic capillary chromatography (MEKC) with UV-detection for the simultaneous determination of various selected pesticides in water samples was investigated. The developed method using solid-phase extraction showed high efficiency and good resolution with detection limits in the 0.2 to 0.5 ppm range. Comparison of several SPE cartridges demonstrates their suitability for the extraction of pesticides with different hydrophobicity achieving 5000-fold enrichment. The described method involving SPE procedure and MEKC separation enables the successful determination of a wide spectrum of pesticides in water in the range of maximum residue limits (MRLs).     

Determination of fungicide residues in fruits by coupled-column liquid chromatography

Coupled-column liquid chromatography with fluorescence detection was applied to the determination of o-phenylphenol and bitertanol residues in orange and banana fruits. After extraction with a mixture of acetone, dichloromethane-petroleum ether, and ethyl acetate, an extract aliquot of 100 microL was injected directly without any additional clean-up into the chromatographic system using two reversed phase C18 coupled columns. The LC-LC approach allowed automated sample clean up of the vegetal extracts, leading to a simple and rapid analytical procedure, with limits of quantification between 0.01 and 0.05 mg kg(-1). Recovery experiments performed on orange and banana samples fortified at different concentrations (0.01 - 4 mg kg(-1)) gave average recoveries between 70 and 113% with relative standard deviations lower than 15%. The procedure developed was finally applied to orange and banana samples from different geographical locations and the results were confirmed by GC-MS.     

Flow injection on-line ultrasound-assisted extraction of iron in meat samples coupled to a flame atomic absorption spectrometric system

Iron was extracted on-line from solid meat samples by a simple and rapid continuous ultrasound-assisted extraction system (CUES). The CUES is connected to a flow injection manifold, which allows the on-line flame atomic absorption spectrometric determination of iron. A Plakett–Burman design was used for the optimisation of the CUES. The method achieved a total sampling frequency of 11 samples per hour with a relative standard deviation for the complete procedure of 0.4%. The detection limit was 0.6 g g^–1 (dry mass) for a sample amount of 30 mg. Accurate results were obtained by measuring the certified reference materials BCR-186 (pig kidney) and BCR-184 (bovine muscle). The analytical procedure was applied to different real meat samples with satisfactory results.     

Isolation of new quinidine metabolites and simultaneous determination of quinidine and its metabolites in blood and urine by direct injection HPLC analysis

Summary New quinidine metabolites, including 10,11-dihydrodiol quinidine N-oxide, 10,11-dihydrodiol quinidine and their glucuronides, were found in human urine. A quinidine monitoring HPLC method including these metabolites, is proposed by the direct injection of body fluid samples onto the precolumn for deproteinization followed by reverse phase separation in the analytical column with a column switching technique. The recovery of spiked quinidine and its metabolites in plasma was quantitative (98–102%) with good reproducibility (C.V.: 1.6–4.0%). Several clinical samples such as whole blood and urine were analyzed by the present method.     

Sample preparation in analysis of pharmaceuticals

Sample preparation is a very important and essential step in environmental analysis. This article presents an overview of extraction methods for environmental samples, focusing especially on pharmaceuticals as there is great concern about them as pollutants.     

Purification and properties of a β-galactosidase with potential application as a digestive supplement

Functional-based screening of crude β-galactosidase activities from 42 yeast strains resulted in the selection of a single enzyme of potential interest as a digestive supplement. β-Galactosidase produced by Kluyveromyces marxianus DSM5418 was purified to homogeneity by a combination of gel filtration, ion-exchange, and hydroxylapatite chromatographies. The denatured (123 kDa) and native molecular masses (251 kDa) suggest that the enzyme is a homodimer. The optimum pH and temperature of the purified enzyme were 6.8 and 37°C, respectively. The unpurified β-galactosidase in particular displayed a high level of stability when exposed to simulated intestinal conditions in vitro for 4 h. Matrix-assisted laser desorption ionization mass sectrometry analysis revealed that the enzyme's trypsin-generated peptide mass fingerprint shares several peptide fragment hits with β-galactosidases from Kluyveromyces lactis. This confirms the enzyme's identity and indicates that significant sequence homology exists between these enzymes.     

倒数示波计时电位法在合金样品测定中的应用

应用倒数示波计时电位法，在含有吸附络合物的溶液中，采用桂汞电极作为极化电极，测定了Ｃｕ＾２＋、Ｎｉ＾２＋、Ｃｄ＾２＋、Ｐｂ＾２＋等几种金属离子的检测下限，并通过沿（ｄＥ／ｄｔ）－１￣Ｅ曲线上的峰高对合金样品进行定量分析，得到满意结果。实现了示波分析由常量到微量的飞跃。