Feature-driven Cartesian adaptive mesh refinement for vortex-dominated flows

We develop locally normalized feature-detection methods to guide the adaptive mesh refinement (AMR) process for Cartesian grid systems to improve the resolution of vortical features in aerodynamic wakes. The methods include: the Q-criterion [1], the λ₂ method [2], the λ_ci method [3], and the λ₊ method [4]. Specific attention is given to automate the feature identification process by applying a local normalization based upon the shear-strain rate so that they can be applied to a wide range of flow-fields without the need for user intervention. To validate the methods, we assess tagging efficiency and accuracy using a series of static vortex-dominated flow-fields, and use the methods to drive the AMR process for several theoretical and practical simulations. We demonstrate that the adaptive solutions provide comparable accuracy to solutions obtained on uniformly refined meshes at a fraction of the computational cost. Overall, the normalized feature detection methods are shown to be effective in driving the AMR process in an automated and efficient manner.     

Identification and Biological Activity of Volatile Organic Compounds Emitted by Plants and Insects. IV. Composition of Vapor Isolated from Certain Species of Artemisia Plants

The components of fragrance from four wormwood species of theArtemisiaL. genus were analyzed by GC-MS. The major and minor components of volatile essential oils typical of the studied plant species were determined.     

Simultaneous determination of docosahexaenoic acid and eicosapentaenoic acid in common seafood using ultrasonic cell crusher extraction combined with gas chromatography

An effective method for the simultaneous determination of docosahexaenoic acid and eicosapentaenoic acid in common seafood by gas chromatography was developed and validated. Total docosahexaenoic acid and eicosapentaenoic acid were extracted from seafood by ultrasonic cell crusher assisted extraction and methyl esterified for gas chromatography analysis in the presence of the internal standard. The linearity was good (r > 0.999) in 9.59 ∼ 479.5 μg/mL for docosahexaenoic acid and 9.56 ∼ 477.8 μg/mL for eicosapentaenoic acid. The intrarun and interrun precisions were both within 4.8 and 6.1% for the two analytes, while the accuracy was less than 5.8%. The developed method was applied for determination of docosahexaenoic acid and eicosapentaenoic acid in six kinds of seafood. The result showed the content of docosahexaenoic acid and eicosapentaenoic acid was all higher than 1 mg/g in yellow croaker, hairtail, venerupis philippinarum, mussel, and oyster. Our work may be helpful for dietary optimization and production of docosahexaenoic acid and eicosapentaenoic acid.     

Air Flow Computation around an Automated Guided Vehicle

An upwind finite element scheme for the incompressible viscous flow at a high Reynolds number was proposed by the fourth and fifth authors. The scheme has the potential to approximate the advection term in third-order accuracy. We apply it to a two-dimensional non-stationary analysis of airflows around an Automated Guided Vehicle (AGV), which starts with constant acceleration, runs at a constant speed and stops with constant deceleration. The results are at least qualitatively good and compatible with experimental ones.     

Hydrothermal Synthesis and Primary Gas Sensing Properties of CuO Nanosheets

Uniformity nanosheets of CuO were prepared by a mild hydrothermal synthesis method. Phase analysis was carried out using x-ray diffraction (XRD) and the result confirmed the CuO nanosheets as a single phase. The field-emission scanning electron microscopy (FE-SEM) was used to observe the morphology of CuO nanosheets while the gas sensing properties of these unique CuO nanosheets were tested at a static state system. The results show that the CuO has uniformity nanosheets, and the gas sensing property show that the CuO nanosheets gas sensor has a stable gas response and the same gas sensitivity trend to tested gases. This method may be suitable for larger-scale production of these CuO nanosheets for practical applications.     

Simulation of container filling process with two inlets by improved smoothed particle hydrodynamics (SPH) method

In this article, an improved smoothed particle hydrodynamics (SPH) method is proposed to simulate the filling process with two inlets. Improvements are achieved by deriving a corrected kernel gradient of SPH and a density re-initialisation. In addition, a new treatment of solid wall boundaries is presented. Thus, the improved SPH method has higher accuracy and better stability, and conserves both linear and angular momentums. The validity of the new boundary treatment is shown by simulating the spin-down problem. The bench tests are also presented to demonstrate the performance of the improved SPH method. Then the filling process with a single inlet is simulated to show the ability to capture complex-free surface of the proposed method. Finally, the filling process with two inlets is numerically investigated. The numerical results show that the filling patterns are affected significantly by Reynolds number, aspect ratio of the container and the location of the inlets.     

一种烟气冷却器的研制

介绍了某型烟气冷却器的设计思路,主要从结构的紧凑性、制冷系统的匹配等方面给予了阐述,通过实际应用说明了其设计的可行性,证明设计是成功的.     

气体钻水平井环空冲蚀能量分析

在建立水平井流动方程的基础上,通过气固两相流动基本数学模型的求解数值模拟不同工况条件下的气固混合物冲蚀能量,得出了冲蚀能量的变化规律。算例数值模拟显示:环空速度剖面主要由注气量大小决定,机械钻速的影响不大;相同注气量条件下,机械钻速降低与井下岩屑浓度等比例下降;注气量的增加能提高井眼净化程度,但不如降低机械钻速效果明显;环空总冲蚀能中气体冲蚀能量占绝对主要地位,岩屑冲蚀能量只占极小部分,在相同注气量条件下总冲蚀能量基本相同;岩屑冲蚀能量主要取决于机械钻速,机械钻速越大井底产生岩屑越多冲蚀能力越强,相同机械钻速条件下,较大注气量能提供较大岩屑运移速度,提高了岩屑冲蚀能量。     

Faraday instability with a polymer solution

We present an experimental study of the Faraday instability in which we compare the behavior of a Newtonian fluid (water-glycerine mixture) with that of a semi-dilute non-Newtonian solution of high molecular weight polymer. We show that although the dispersion relation of surface waves, derived for a layer of inviscid fluid, remains valid in that particular non-Newtonian case, the behavior of the instability threshold with frequency strongly differs from the Newtonian case. We explain this effect as a result of a frequency-dependent viscosity. The linear stability analysis of the non-Newtonian case shows a perfect agreement with the experimental results both for the dispersion relation and for the reduction of the instability threshold. We discuss the use of the characteristics of the Faraday experiment as a measurement tool to determine frequency dependent properties of non-Newtonian fluids. Received 5 January 1999     

A critical investigation of smoothed particle hydrodynamics applied to problems with free‐surfaces

In this paper, an in‐depth study of SPH method, in its original weakly compressible version, is achieved on dedicated 2D and 3D free‐surface flow test cases. These rather critical prototype problems shall constitute suitable test cases to get through when building a free‐surface SPH model. The present work aims at investigating various numerical aspects of this method, often little mentioned in literature. In particular, a great care is paid to the dynamic part of the solution, which is critical to the local hydrodynamic load prediction. The role of numerical errors in the development of acoustic frequencies in the pressure signals is discussed, as well as the influence of the choice of the sound velocity. On the shown test problems, it is also evidenced that some numerical tools are crucial to ensure the robustness and accuracy of the standard SPH method. The convergence of our model is heuristically proved on these nonlinear prototype tests, showing at the same time the very satisfactory level of accuracy reached. Through these tests, some other numerical specificities of the SPH method are discussed, such as the self‐redistribution of the particles occurring during the Lagrangian evolution. A higher order model is also proposed, and its advantages and drawbacks are discussed. Copyright © 2013 John Wiley & Sons, Ltd.