探求高效裂解生产乙烯的新途径

乙烯是裂解反应过程中的中间产物，其收率随反应时间变化．在最佳反应时间，收率最高．裂解反应温度愈高，峰值收率愈高，最佳反应时间则愈短．当前通用的竖管裂解炉难以满足大幅度提高乙烯收率并降低生产成本的要求．评述了几种激波加热方法的优缺点．简要描述了我们目前正在研究中的反向射流混合加热方法．     

Measurement of the effective thermal conductivity of a Mg–MgH2 packed bed with oscillating heating

The magnesium–magnesium hydride–hydrogen-system (Mg–MgH₂–H₂) offers, because of its combined hydrogen and heat storage capacity, the possibility to design hydride heat pumps and heat stores. For such industrial application systems based on cylindrically formed reactors filled with an active magnesium powder, the effective thermal conductivity limits the time in which the metal hydride alloy is charged and discharged with hydrogen. Determination of this transport coefficient is of fundamental importance for the optimum design of magnesium hydride reactors. The complex interrelation of the different transport mechanisms in a metal hydride packed bed and the hitherto undefined rule that the solid effective thermal conductivity behaves as a function of the hydrogen concentration, requires a reliable and simple-to-realize measuring method so as to determine the effective thermal conductivity of a magnesium hydride bed. In the present study, a report is given for the first time on the initiation of a measuring technique with oscillating change of temperature in a non-permeated packed bed of fine-grained material. The measurement of the effective thermal conductivity can ensue by tailoring the problem-specific mathematical result to the experimentally recorded temperature-time function. The effective thermal conductivity of the magnesium hydride bed varies between 2 and 8 W/(m K) in a temperature range of 523–653 K.     

飞秒激光辐射纳米薄膜脱附的能量输运机理研究

从微观能量传输角度,对飞秒脉冲激光的辐射传热及其产生的金属薄膜吸附层分子脱附过程的能量输运机理进行了研究。以非平衡态传热和随机过程理论为基础,建立了描述吸附分子脱附过程的数学模型;并分别对单脉冲与双脉冲飞秒激光辐射下,金属Ru基体表面层的电子和声子的温度分布、吸附层分子CO的脱附概率分布进行了数值模拟。其结果与实验规律相符,为飞秒脉冲激光应用于微机电系统中杂质脱附提供了重要信息。     

Numerical modeling of the single-phase Stefan problem in a layer with transparent and semitransparent boundaries

Numerical modeling of the single-phase Stefan problem in a semitransparent layer with transparent, nonabsorbing, and partially radiation-absorbing boundaries is performed. It is shown that at low temperatures of the medium, convection is a determining factor on the boundary of the irradiated sample, and at high temperatures, radiation is predominant. The absence of absorption on the boundaries of the layer leads to acceleration of the heating of the plate and considerable deceleration of melting processes. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 3, pp. 84–91, May–June, 2006.     

衬底加热和电极修饰对提高有机场效应晶体管性能的影响

通过衬底加热和氧化钼(MoO3)修饰源漏极制备了并五苯有机场效应晶体管.研究了衬底温度和电极修饰层厚度对器件性能的影响.实验结果表明:当衬底温度为60℃、MoO3修饰层为10 nm时,器件性能获得了显著增强,场效应迁移率由原来的3.39×10-3 cm2/(V·s)提高到2.25 ×10-1 cm2/(V·s),阈值电压由12 V降低到3V.器件性能的改善归因于:衬底加热可以优化有源层形貌,改善载流子传输;而MoO3修饰层显著降低了电极与有源层之间的接触势垒,提高了载流子的注入.因此,衬底加热与电极修饰对于制备高性能有机场效应晶体管是不可或缺的优化手段.     

Long distance-SRN1 in nitroimidazole series favored by temperature

New reductive alkylating agents in 4- and 5-nitroimidazole series produce exclusively O-alkylation with nitronate anions under classical S_RN1 conditions at room temperature. Electron-transfer C-alkylation is observed under microwave irradiation or under conventional heating. Furthermore, X-ray spectroscopy shows that the dihedral angles between the phenyl and imidazole rings for the two series are different, which could greatly influence reactivity in 4- and 5-nitroimidazole series.     

Microwave assisted preparation of efficient activated carbon from grapevine rhytidome for the removal of methyl violet from aqueous solution

Grapevine rhytidome (the outer layer of bark on trunk), as an abundant and low-cost precursor, was used to prepare granular activated carbon with high surface area for the removal of methyl violet from aqueous solution. Microwave heating source was used to reduce the treatment time and energy consumption. To optimize the preparation, the effects of the different parameters, such as phosphoric acid concentration, acid/precursor weight ratio, impregnation time, microwave power, radiation time, and oven heating time on the ability of the samples for removal of methyl violet were studied. The obtained activated carbon was characterized by N₂ adsorption/desorption, SAXS, TEM and SEM methods. The adsorption of methyl violet onto the activated carbon was studied from both equilibrium and kinetic point of view and the results were compared with the commercial granular activated carbon. The rate of adsorption onto the prepared activated carbon was faster than commercial activated carbon. Different kinetic models were used to analyze the experimental kinetic data. The obtained activated carbon showed higher adsorption capacity (more than twice) for the adsorption of methyl violet in comparison with the commercial one. The equilibrium data were analyzed using different isotherm models. Adsorption was found to be maximum in the pH range 7-9.     

Practical method transfer from high performance liquid chromatography to ultra-high performance liquid chromatography: the importance of frictional heating

In theory, with identical stationary phase chemistry, the transfer of an HPLC method to UHPLC conditions is straightforward and necessitates the calculation of new conditions based on column and instrument geometries. Occasionally, undesirable changes in selectivity, retention or efficiency have been reported and have been attributed to a frictional heating phenomenon that is due to the elevated generated pressure drop. In the present study, the frictional heating in a UHPLC system was evaluated experimentally under gradient elution conditions (acetonitrile/buffer at pH 3 and 9) with generated pressure drops in the range of 100-1000 bar on both 1.0mm and 2.1mm I.D. columns using a mixture of 10 representative basic, acidic and neutral pharmaceutical compounds. Under adiabatic conditions (i.e., still-air oven), the longitudinal temperature gradient was estimated at +4 °C, +8 °C and +16 °C at 300, 600 and 1000 bar, respectively, on a 2.1mm I.D. column using an empirical measurement procedure. With the 1.0mm I.D. column, these values were reduced to +3 °C, +6 °C and +12 °C, respectively. Finally, various approaches to eliminate or at least to reduce the effect of frictional heating are briefly discussed.     

横向和纵向加热涂钨平台石墨炉原子吸收光谱法测定镓的比较

分别优化了横向加热和纵向加热涂钨平台石墨炉原子吸收光谱法测定镓的条件。结果显示,纵向加热方式的原子化温度比横向加热低,在灰化温度、进样量、酸介质的影响和化学改进剂等方面,两者没有显著差别。纵向加热的灵敏度高于横向加热,线性范围也比横向加热宽;但是采用横向加热方式能获得更低的检出限和更强的抗干扰能力。     

Development of novel synthetic method of carbon nanotubes from electrospun polystyrene fibers by using microwave heating

We have developed a novel synthetic method that enables us to easily synthesize metal‐capsulated carbon nanotubes (CNTs) in a laboratory by using a combined technology of electrospinning‐metallization and microwave heating. These techniques greatly shorten the time for the synthesis of the CNTs in comparison with the conventional methods. TEM analysis confirmed a successful formation of the CNTs, and the resulting CNTs were multi‐walled and found to be about 25–100 nm in diameters. The products prepared by heating at 600 and 900°C exhibited less‐developed and strongly curved CNTs, whereas the products prepared by heating at 700 and 800°C relatively well‐developed long CNTs. Copyright © 2010 John Wiley & Sons, Ltd.