Comprehensive study on the formation of polyelectrolyte complexes from (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] and poly(2‐acrylamido‐2‐methylpropane sodium sulfonate)

Polyelectrolyte complexes (PECs) have been prepared from well‐defined (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) and high molecular weight poly(2‐acrylamido‐2‐methylpropane sodium sulfonate) (PAMPSNa) after a thorough study of their viscometric properties. The effect of pH and quaternization degree of PDMAEMA on PECs stoichiometry has been examined. PEC‐based materials have been characterized in terms of thermal stability, equilibrium swelling degree, and free/bound water composition. The stoichiometry and swellability of the physically crosslinked hydrogels obtained from fully quaternized PDMAEMA/PAMPSNa complexes do not depend on pH. In contrast, PECs made of non quaternized PDMAEMA and PAMPSNa are highly affected by pH, and could reversibly disintegrate at pH ≥ 9. Partially quaternized PDMAEMA/PAMPSNa PECs exhibit intermediate properties and form stable loose structures in the whole investigated pH range. Finally, stable dispersions of PECs nanoparticles have been successfully produced from dilute solutions of the complementary polyelectrolytes. The nanoparticle average diameter as determined by dynamic light scattering proved to depend on the molar fraction of DMAEMA‐based subunits and on the initial polyelectrolyte concentration. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5468–5479, 2006     

Single electron transfer–degenerative chain transfer living radical polymerization of N‐butyl acrylate catalyzed by Na2S2O4 in water media

Living radical polymerization of n‐butyl acrylate was achieved by single electron transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionate. The plots of number–average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This methodology leads to the preparation of α,ω‐di(iodo) poly (butyl acrylate) (α,ω‐di(iodo)PBA) macroinitiators. The influence of polymerization degree ([monomer]/[initiator]), amount of catalyst, concentration of suspending agents and temperature were studied. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV), and refractive index (RI). The methodology studied in this work represents a possible route to prepare well‐tailored macromolecules made of butyl acrylate in an environmental friendly reaction medium. Moreover, such materials can be subsequently functionalized leading to the formation of different block copolymers of composition ABA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2809–2825, 2006     

Measurement and prediction of solubilities and diffusion coefficients of carbon dioxide in starch–water mixtures at elevated pressures

The solubility and diffusion coefficient of carbon dioxide in intermediate‐moisture starch–water mixtures were determined both experimentally and theoretically at elevated pressures up to 16 MPa at 50 °C. A high‐pressure decay sorption system was assembled to measure the equilibrium CO₂ mass uptake by the starch–water system. The experimentally measured solubilities accounted for the estimated swollen volume by Sanchez–Lacombe equation of state (S‐L EOS) were found to increase almost linearly with pressure, yielding 4.0 g CO₂/g starch–water system at 16 MPa. Moreover, CO₂ solubilities above 5 MPa displayed a solubility increase, which was not contributed by the water fraction in the starch–water mixture. The solubilities, however, showed no dependence on the degree of gelatinization (DG) of starch. The diffusion coefficient of CO₂ was found to increase with concentration of dissolved CO₂, which is pressure‐dependent, and decrease with increasing DG in the range of 50–100%. A free‐volume‐based diffusion model proposed by Areerat was employed to predict the CO₂ diffusivity in terms of pressure, temperature, and the concentration of dissolved CO₂. S‐L EOS was once more used to determine the specific free volume of the mixture system. The predicted diffusion coefficients showed to correlate well with the measured values for all starch–water mixtures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 607–621, 2006     

How much sweetness is there in the universe?

We continue investigations of forcing notions with strong ccc properties introducing new methods of building sweet forcing notions. We also show that quotients of topologically sweet forcing notions over Cohen reals are topologically sweet while the quotients over random reals do not have to be such. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

USING A SYSTEM DYNAMICS APPROACH TO MODEL SUSTAINABILITY INDICATORS FOR IRRIGATION SYSTEMS IN AUSTRALIA

ABSTRACT. An indicator defined as a function of the total water diversion through the Coleambally canal and the potential irrigation demand is selected to represent the sustainability of the irrigation water system in the Coleambally irrigation area, Australia. A simulation procedure using a system dynamics approach was developed to evaluate the indicator. The procedure includes water diversion assessment, potential crop water demand and total gross margin. Three cases of water supply options (surface water, ground water pumping and water trading), two cases of changes in the total agricultural area and three cropping pattern scenarios were simulated to better understand their impact on sustainability. The simulated results indicate that increasing the agricultural area reduces the sustainability of the irrigation system because the demand of water increased despite increase in the gross margin. The scenarios show that imposed water trading and ground water pumping would considerably increase the supply system having a positive impact on the sustainability. The paper concludes that a multi‐objective sustainability indicator taking account of economic and environmental issues could be more useful.     

高分子阳离子絮凝剂用于炼油废水处理研究

用聚二甲基二烯丙基氯化铵型高分子阳离子絮凝剂处理炼油废水考察了险油和化学耗氧量的动态变化规律。对产生的浮渣性质及滤饼的成份进行了研究。并且与聚合铝的处理效果进行对照。研究结果表明，ＨＣＡ除油和化学耗管氧量的性能优于ＰＡＣ，ＨＣＡ产生的浮渣是ＰＡＣ的三分之一，而浮渣中的含油量则是ＰＡＣ的三倍。     

CONFLICT AND COOPERATION IN UTILIZING A COMMON PROPERTY RESOURCE

Noncooperative games are used to demonstrate that, while free riding is always an option, the “tragedy of the commons” is not inevitable. When the decision to cooperate or free ride is considered in a dynamic setting, there is no intermediate case where some cooperate and others free ride. The game is only stabilized in either full cooperation or full defection. The important factor in obtaining a cooperative outcome is the critical number of players that decide to cooperate. The concept of commitment is used to demonstrate the necessary and sufficient conditions for full cooperation. Although the analysis is based on a shared water resource, it can be extended to other natural resources with common costs and private benefits, especially in the cases where there are no international authorities or treaties that internalize the externalities involved in privatizing the resource.     

Solving multiple-objective problems in the objective space

Projection and relaxation techniques are employed to decompose a multiobjective problem into a two-level structure. The basic manipulation consists in projecting the decision variables onto the space of the implicit tradeoffs, allowing the definition of a relaxed multiobjective master problem directly in the objective space. An additional subproblem tests the feasibility of the solution encountered by the relaxed problem. Some properties of the relaxed problem (linearity, small number of variables, etc.) render its solution efficient by a number of methods. Representatives of two different classes of multiobjective methods [the Geoffrion, Dyer, Feinberg (GDF) method and the fuzzy method of Baptistella and Ollero] are implemented and applied within this context to a water resources allocation problem. The results attest the computational viability of the overall procedure and its usefulness for the solution of multiobjective problems.This work was partially sponsored by grants from CNP_q and FAPESP, Brazil. The authors are indebted to the anonymous reviewers for their valuable comments.     

Asymptotic behavior of energy band associated with a negative energy level

The mathematical foundation of the tight binding approximation is given. If ₀ is a negative energy level of a real potentialq, then there exists an energy band for a one-dimensional chain with period 2T of the same atoms which lies near ₀. We study this band whenT tends to infinity.On leave of absence from the Department of Physics, Leningrad State University, Leningrad, USSR.     

Pressure and temperature effects on the excess deuteron and proton conductance

The limiting molar conductances ° of deuterium chloride DCl in D₂O were determined as a function of pressure and temperature in order to examine the proton-jump mechanism in detail. The excess deuteron conductances °_E(D ⁺), as estimated by the equation [°_E(D ⁺) = °(DCl/D ₂ O) – °(KCl/D ₂ O)], increases with an increase in the pressure and temperature as well as the excess proton conductance [°_E(H ⁺) = °(HCl/H ₂ O) – °(KCl/H ₂ O)]. The isotope effect on the excess conductances, however, depends on the pressure and temperature contrary to the model proposed by Conway et al.: °_E(H ⁺)/°_E(D ⁺) decreases with increasing pressure and temperature. The magnitude of the decrease with pressure becomes more prominent at lower temperature. These results are discussed in terms of the pre-rotation of adjacent water molecules, the bending of hydrogen bonds with pressure, and the difference in strength of hydrogen bonds between D₂O and H₂O.