Polypropylene/polystyrene/clay blends prepared by an innovative eccentric rotor extruder based on continuous elongational flow: Analysis of morphology,rheology property,and crystallization behavior

The polypropylene (PP)/polystyrene (PS)/montmorillonite (MMT) blends were prepared by an innovative eccentric rotor extruder based on continuous elongational flow. Addition of MMT nanoparticles was found to reduce the PS droplet size and improve the compatibility of PP/PS. The MMT nanoparticles had clear intercalation and/or exfoliation structures and were located mostly at the interface of PP/PS. It was found that the intercalation and exfoliation of MMT was finished under the synergy of interfacial interaction and tensile deformation so that we called the mechanism as “MMT exfoliation mechanism induced by synergy of interface and tensile deformation”. The rheological analysis showed that incorporation of MMT led to an increase in complex viscosity to an optimum level (5 wt%), after which any further increase in MMT concentration decreased the complex viscosity. Moreover, the degree of crystallinity of blends was controlled by the heterogeneous nucleation effect of MMT and the inhibition effect of PS.     

The role of the solvation shell decomposition of alkali metal ions in their selective complexation by resorcinarene and its cavitand

2-Methylresorcinarene and its methylene-bridged cavitand derivative as host compounds were investigated in selective complexation of alkali metal ions as guests in methanol media by photoluminescence measurements. These host molecules possess either flexible (2-methylresorcinarene) or rigid (cavitand) molecular skeleton. The Benesi–Hildebrand method and the van't Hoff theory have been applied to determine the stability constants and the thermodynamic parameters, respectively. Considerable interactions between 2-methylresorcinarene and Li⁺ or Na⁺ ions have been observed while the rigid cavitand derivative can interact only with K⁺ or Cs⁺ ions. Neither the complexes of 2-methylresorcinarene with K⁺ or Cs⁺ nor those of the cavitand derivative with Li⁺ or Na⁺ ions are stable at room temperature in methanol media. Quantum-chemical investigations justified that only solvated Li⁺ and Na⁺ ions can form stable complexes with 2-methylresorcinarene while unsolvated K⁺ and Cs⁺ ions form stable complexes with the methylene-bridged cavitand. These results highlight that the stability of the guest solvation shell and its size could play a key role in the selectivity behaviour of host molecules.     

Synthesis of CuCorePtShell Nanoparticles as Model Structures for Core–Shell Electrocatalysts by Direct Platinum Electrodeposition on Copper

The synthesis of Cu(core)Pt(shell) model catalysts by the direct electrochemical deposition of Pt on Cu particles is presented. Cu particles with an average diameter of 200 nm have been deposited on glassy‐carbon electrodes by double pulse electrodeposition from a copper sulfate solution. Subsequent deposition from a platinum nitrate solution under potential control allows for a high selectivity of the Pt deposition towards Cu. Using a combination of cyclic voltammetry, XPS and sputtering, the structure of the generated particles has been analyzed and their core–shell configuration proven. It is shown that the electrocatalytic activity for the oxygen reduction is similar to that of other PtCu catalyst systems. The synthesized structures could allow for the analysis of structure–activity relations of core–shell catalysts on the way to the simple and controlled synthesis of supported Cu(core)Pt(shell) nanoparticles as oxygen reduction catalysts.     

Synthesis and photocatalytic properties of core–shell TiO~2@ZnIn_2S_4 photocatalyst

A novel core–shell TiO2@ZnIn2S4composite has been synthesized successfully by a simple and flexible hydrothermal route using TiO2as precursors.The as-synthesized samples were characterized by X-ray diffraction,UV–vis diffuse reflectance spectra and transmission electron microscopy.The photocatalytic properties of samples were tested by degradation of aqueous methylene blue（MB）under visible light irradiation.It was found that the as-synthesized TiO2@ZnIn2S4photocatalyst was more effcient than TiO2and ZnIn2S4in the photocatalytic degradation of MB.Moreover,TEM images confrmed the TiO2@ZnIn2S4nanoparticles possessed a well-proportioned core–shell morphology.     

Study of the Phase Transformation of Single Particles of Ga2O3 by UV‐Raman Spectroscopy and High‐Resolution TEM

By taking advantage of UV‐Raman spectroscopy and high‐resolution TEM (HRTEM), combined with the focused ion beam (FIB) technique, the transformation from GaOOH into α‐Ga₂O₃ and then into β‐Ga₂O₃ was followed. We found that the stepwise transformations took place from the surface region before developing into the bulk of single particles without particle agglomeration and growth. During the transformation from GaOOH into α‐Ga₂O₃, the elimination of water vapor through the dehydroxylation of GaOOH resulted in the formation of micropores in the single particles, whilst maintaining their particle size. For the phase transformation from α‐Ga₂O₃ into β‐Ga₂O₃, the nucleation of β‐Ga₂O₃ was found to occur at the surface defects and this process could be retarded by occupying these defects with a small amount of La₂O₃. By finely controlling the process of the phase transformation, the β‐Ga₂O₃ domains gradually developed from the surface into the bulk of the single particles without particle agglomeration. Therefore, the surface structure of the α‐Ga₂O₃ single particles can be easily tuned and a particle with an α@β core–shell phase structure has been obtained.     

Ab‐Initio study of Helium‐small carbon cage systems

The traditional method for opening the electron shells of noble gas atoms involves a strong electronegative atom or group. However, this approach is limited to only heavy noble‐gas atoms, such as Kr and Xe. In this paper, we performed accurate calculations of He@C₈H₈ and He@C10H16 and showed the possibility of opening the electron shell of a light noble‐gas atom. © 2012 Wiley Periodicals, Inc.     

An assessment of pure,hybrid, meta,and hybrid‐meta GGA density functional theory methods for open‐shell systems: The case of the nonheme iron enzyme 8R–LOX

The performance of a range density functional theory functionals combined in a quantum mechanical (QM)/molecular mechanical (MM) approach was investigated in their ability to reliably provide geometries, electronic distributions, and relative energies of a multicentered open‐shell mechanistic intermediate in the mechanism 8R–Lipoxygenase. With the use of large QM/MM active site chemical models, the smallest average differences in geometries between the catalytically relevant quartet and sextet complexes were obtained with the B3LYP^* functional. Moreover, in the case of the relative energies between ⁴II and ⁶II , the use of the B3LYP^* functional provided a difference of 0.0 kcal mol^–1. However, B3LYP^± and B3LYP also predicted differences in energies of less than 1 kcal mol^–1. In the case of describing the electronic distribution (i.e., spin density), the B3LYP^*, B3LYP, or M06‐L functionals appeared to be the most suitable. Overall, the results obtained suggest that for systems with multiple centers having unpaired electrons, the B3LYP^* appears most well rounded to provide reliable geometries, electronic structures, and relative energies. © 2012 Wiley Periodicals, Inc.