叠层连续开口圆柱壳的精确解

抛弃任何有关位移和应力模式的假设，引入δ-函数，对正变异性连续开口圆柱壳建立状态方程．给出薄的、中厚的和强厚的叠层连续开口圆柱壳静力问题的统一的精确解．数值结果和SAPS解进行了对比．     

MEASUREMENTS OF Fe AND Cu K-Shell IONIZATION CROSS SECTIONS BY SLOW ELECTRON IMPACT

ＭＥＡＳＵＲＥＭＥＮＴＳＯＦＦｅＡＮＤＣｕＫ－ＳｈｅｌＩＯＮＩＺＡＴＩＯＮＣＲＯＳＳＳＥＣＴＩＯＮＳＢＹＳＬＯＷＥＬＥＣＴＲＯＮＩＭＰＡＣＴＬｉＴａｉｈｕａＡｎＺｈｕＬｕｏＺｈｅｎｇｍｉｎｇＣｅｎｔｅｒｆｏｒＲａｄｉａｔｉｏｎＰｈｙｓｉｃｓ，Ｉｎｓ...     

复合载荷下圆底扁球壳非线性稳定性

本文采用半解析方法研究在中心分布载荷及中心集中力联合作用下,圆底扁球壳的非线性稳定性问题.避免了求近似解析解时繁重的人工计算,而p-W_m特征关系仍可由显式表达.     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

SD对壳模型: 偶偶Pt核低激发态性质

利用SD对壳模型讨论了偶偶Pt核低激发态的集体性质. 结果发现在该模型下, 利用一个仅含有3个参数的哈密顿量, 可以很好地再现偶偶Pt核低激发谱的集体性质.     

Study on pyrolysis kinetics of walnut shell

Slow pyrolysis of walnut shell which is a cheap and abundantly available solid waste was carried out using thermogravimetric analysis. The effects of raw material heating rate on the pyrolysis properties and kinetic parameters were investigated. A two-step consecutive reaction model were used to simulate the pyrolysis process. The kinetic parameters were established by using the pattern search method. Comparison between experimental data and the model prediction indicated that the two-step consecutive reaction model can better describe the slow pyrolysis of walnut shell as the formation of an intermediate during the pyrolysis process was taken into account.     

Dependence of the rate constants on the treatment of internal rotation modes: the reaction OH + CH3SH --> CH3S + H2O as an example

The title reaction has been used as an example to test the importance of using a hindered rotor treatment instead of a harmonic oscillator model for calculating vibrational partition functions corresponding to low-frequency internal rotation modes. First, a normal-mode analysis according to the Ayala and Schlegel's algorithm has been used to identify the internal rotation modes of methanethiol and the transition state structure. Then, after calculation of the energy barrier for each internal rotation, the corresponding hindered rotor partition functions have been calculated following the CW scheme of Chuang and Truhlar. The results show that the anharmonic treatment produces a rather modest improvement of the rate constants at room temperature or below.     

核／壳结构增韧剂对环氧树脂的抗冲改性

核／壳结构增韧剂对环氧树脂的抗冲改性张明耀，张会轩，杨海东，冯之榴（吉林工学院化学工程系长春１３００１２）（中国科学院长春应用化学研究所长春）关键词核／壳结构，增韧剂，环氧树脂，共混核／壳结构增韧剂是用分步乳液聚合技术制造的一种复合乳胶粒子，其核为橡...     

Preparation, characterization, and application of multistimuli-responsive microspheres with fluorescence-labeled magnetic cores and thermoresponsive shells

Novel functional microspheres with multistimuli-responsive properties have been prepared and characterized. The as-prepared microspheres respond to an external magnetic field, environmental temperature, and ultraviolet radiation. The in vitro drug-loading efficiency and drug-release behavior of these microspheres demonstrated that they could be used as drug carriers for drug controlled release. The results of in vivo distribution investigations of these microspheres showed that they exhibit a high magnetic-targeting effect, which holds promise for applications in various fields such as magnetic drug targeting and tissue labeling, among others.