Geometric phase within the complex quantum Hamilton-Jacobi formalism

We derive a geometric phase using the quantum kinematic approach within the complex quantum Hamilton-Jacobi formalism. The single valuedness of the wave function implies that the geometric phase along an arbitrary path in the complex plane must be equal to an integer multiple of 2π. The nonzero geometric phase indicates that we travel along the path through the branch cut of the phase function from one Riemann sheet to another.     

Thickness-dependent electrical and optical properties of Ge8Sb2Te11 thin films

The amorphous Ge₈Sb₂Te₁₁thin films with varying thickness are thermally deposited on well-cleaned glass substrate from its polycrystalline bulk. Absence of any sharp peak confirms the amorphous nature of deposited films. Thickness-dependent electrical and optical properties including dc-activation energy, sheet resistivity, optical band gap, band tailing parameter, etc. of Ge₈Sb₂Te₁₁thin films have been studied. The optical parameters have been calculated from transmission, reflection and absorbance data in the spectral range of 200–1100 nm. It has been found that optical band gap and band tailing parameter decreases with the increase in Ge₈Sb₂Te₁₁thin films thickness. The dc-activation energy and sheet resistivity decreases while the crystallization temperature of the amorphous Ge₈Sb₂Te₁₁ films increases with the increase in thickness of the films. The decrease of the sheet resistivity has been substantiated quantitatively using the classical size-effect theory. These results have been explained on the basis of rearrangements of defects and disorders in the amorphous chalcogenide system.     

分布反馈式光纤激光水听器拖曳线列阵实验研究

为了进一步增大光纤拖曳阵的探测距离,研制了缆径为16mm的32元分布反馈式光纤激光水听器拖曳线列阵.阵元在10~2 000Hz频率范围内的平均声压灵敏度为-142.7dB(re 1rad/μPa),波动幅度小于±2dB.基于声光调制器的时分、波分联合复用技术实现了32元光纤激光水听器的多路复用,各个阵元之间以及各个通道之间的串扰均小于-40dB,并完成了静态和动态拖曳湖上实验.实验结果表明,研制的32元分布反馈式光纤激光水听器拖曳线列阵无论是在静态,还是在6~16节的动态拖曳状态,都能对目标形成稳定的波束指向,与GPS轨迹记录完全一致,展现了分布反馈式光纤激光水听器拖曳线列阵在工程上的应用前景.     

铁电-铁磁多铁性脉冲形成线特性

对"多铁性"脉冲形成线输出特性进行了研究。利用镍锌铁氧体-钛酸钡陶瓷复合多铁性材料制作了脉冲形成线。在不同的磁回路条件下得到了不同脉冲宽度的电脉冲方波,其中以高磁导率材料组合成的闭合磁回路得到了脉冲宽度约201 ns的方波输出。推算出脉冲形成线的相对介电常数接近2 000,相对磁导率大于1.4。基于有效磁导率的概念,分析了多铁性脉冲形成线几何构型对脉冲输出特性的影响。分析表明:平板状"多铁性脉冲形成线"的有效磁导率不仅取决于平板介质的磁导率,还取决于周围介质的磁导率,因而有效磁导率通常较小,其输出表现出明显的铁电性而只有"弱"的铁磁性;相比之下,同轴结构的"多铁性脉冲形成线"具有更高的有效磁导率,其输出可同时表现出强的铁电性和铁磁性,即更明显的"多铁性"。"多铁性脉冲形成线"有可能在紧凑型脉冲功率系统中获得应用。     

薄膜介质层绕式Blumlein线理论与实验研究

对薄膜介质层绕式Blumlein线的特性参数进行了理论分析。采用Pspice软件对电路模型进行了计算,分析了开关电感、寄生电阻对负载输出波形的影响。结果表明:开关电感的存在使得负载波形前沿变缓,后延波形扭曲变差,寄生电阻会影响负载的电压输出效率。采用模拟软件对传输线中的电磁场分布进行了计算,结果表明薄电极边缘场畸变以及折叠弯曲部分的场变化是绝缘介质耐压必须考虑的因素。基于此理论分析,设计制作了一种新型薄膜介质Blumlein线,绝缘材料为聚酯薄膜,单层薄膜厚100μm,电极为厚50μm的铜皮,单元模块设计耐压50 kV。进行了三级模块串联叠加实验,充电25 kV,匹配负载输出60 kV,脉冲上升沿80 ns,脉冲宽度200 ns。     

Mechanical Properties of Ni-Coated Single Graphene Sheet and Their Embedded Aluminum Matrix Composites

The effects of Ni coating on the mechanical behaviors of single graphene sheet and their embedded Al matrix composites under axial tensionare investigated using molecular dynamics (MD) simulation method. Theresults show that the Young's moduli and tensile strength of grapheneobviously decrease after Ni coating. The results also show that the mechanical properties of Al matrix can be obviously increased by embedding asingle graphene sheet. From the simulation, we also find that the Young'smodulus and tensile strength of the Ni-coated graphene/Al composite isobviously larger than those of the uncoated graphene/Al composite. Theincreased magnitude of the Young's modulus and tensile strength ofgraphene/Al composite are 52.27 and 32.32 at 0.01 K, respectively,due to Ni coating. By exploring the effects of temperature on the mechanicalproperties of single graphene sheet and their embedded Al matrix composites, it is found that the higher temperature leads to the lower critical strain and tensile strength.     

高功率多脉冲调制器研究

 研制了能产生多脉冲的高功率脉冲调制器,该调制器由初级储能系统、带绕式变压器、水介质Blumlein线和场发射二极管组成。在场发射二极管上获得3个峰值功率大于20 GW,半高脉宽约60 ns,脉冲间隔约15 ms,电压约400 kV的高功率电脉冲。理论计算、模拟计算与实验结果基本一致。分析表明主开关恢复时间是影响调制器输出脉冲时间间隔的主要因素。     

用薄层处理法模拟有源共焦非稳

 采用FFT方法和增益介质近腔镜簿层处理法研究了非稳腔下具有非均匀流动介质的高功率气体激光器的光束特性和光束质量,证实了该方法在小扰动、低放大率、低增益器件的腔型中是适用的。     

Preparation and Characterization of Styrene/Butyl Acrylate Emulsifier-Free Latex with 2-Acrylamido-2-Methyl Propane Sulfonic Acid as a Reactive Emulsifier

A kind of emulsifier-free latex (FL) was successfully synthesized from styrene (St) and butyl acrylate (BA) with 2-acrylamido-2-methyl propane sulfonic acid (AMPS) as a reactive emulsifier. The particle size of latex particles, stability against electrolytes, minimum film forming temperature (MFT) and water contact angle (CA) were evaluated and compared with a conventional latex (CL). Test results show that FL has larger particle size, better stability against electrolytes and lower MFT value compared with CL; higher AMPS content leads to smaller particle size and smaller water CA.     

宽板塑性弯曲成形过程中的板厚变化规律

根据宽板弯曲过程中的变形与应力分布特征，提出了一种计算弯曲过程中板料厚度随弯曲程度变化的新的近似解答方法．该方法基于塑性增量理论，应用塑性成形过程的体积不变假设和弯曲过程的平面假设．作为算例，得到了理想刚塑性材料的板料厚度、变薄系数以及应变中性层内移系数随板料弯曲内表面曲率半径变化的规律，并与实验数据进行了比较，两吻合良好．