One- or two-dimensional organometallic arrays containing PdIr2(μ3-S)2 mixed-metal sulfido cluster units connected via the nicotinamide or isonicotinamide ligands on their Pd sites through hydrogen-bonding interactions

Mixed-metal sulfido cluster [(PdCl₂)(Cp*Ir)₂(μ₃-S)₂] (Cp*=η⁵-C₅Me₅) dissolved in CH₂Cl₂ reacted with two equivalent of L (L=nicotinamide, isonicotinamide, or N-methylnicotinamide) in the presence of AgBF₄ to give the cationic clusters [(PdL₂)(Cp*Ir)₂(μ₃-S)₂][BF₄]₂. The single-crystal X-ray diffraction studies of these products have disclosed that in the solid state the PdIr₂S₂ cores are self-assembled to form one-dimensional chains through the intermolecular hydrogen-bonding between the amide groups for L=nicotinamide or two-dimensional sheets via the hydrogen-bonding between the amide groups and the BF₄ anions for L=isonicotinamide, whereas no organization of the cluster cores is observed for L=N-methylnicotinamide.     

Determination of uncertainty for hardness measurement: proposal of the standard,available software

After the next revision of the ISO-standards for hardness testing (ISO 6506–6508) an estimation of the uncertainty (ISO/IEC 17025, ISO 5725) is mandatory. The two proposed approaches of part one (ISO 6506–6508) of the ISO Standards for hardness are exemplified. The calculation approach implemented in an Excel-based file, which is available via , is announced.Presented at the Metro Trade Workshop on Traceability and Measurement Uncertainty in Testing, 30–31 January 2003, Berlin, Germany     

As, Bi, Sb and Sn determination in atmospheric particulate matter by direct solid sampling-hydride generation-electrothermal atomic absorption spectrometry

A novel, rapid and simple method by hydride generation-electrothermal atomic absorption spectrometry (HG-ETAAS) after direct As, Bi, Sb and Sn hydrides generation from untreated filters of atmospheric particulate matter (PM₁₀ and PM_2.5) was optimised. PM₁₀ and PM_2.5 were not subjected to any pre-treatment: circular portions between 0.28 and 6.28 cm² were directly placed into the reaction vessel of a batch mode generation system. A 2⁸ × 3/64 Plackett–Burman design was used as a multivariate strategy for the evaluation of the effects of several variables affecting the hydride generation, trapping and atomisation efficiencies. Trapping temperature was the most statistically significant variable for As, Bi and Sn. Atomisation temperature was also statistically significant for Sb determination. Optimum values of significant variables were selected by using univariate optimisation approaches. An aqueous calibration method was used throughout. The developed method has been found to be precise with relative standard deviations of 6.2, 5.3, 9.1 and 7.5% for 11 determinations in a filter sample containing 0.7, 1.0, 1.4 and 1.7 μg l⁻¹ for As, Bi, Sb and Sn, respectively. Results obtained by direct solid sampling-HG-ETAAS have been found statistically comparable with those obtained after conventional method based on an acid digestion followed to ICP-MS. Absolute detection limits were 37, 15, 30, and 41 ng l⁻¹ for As, Bi, Sb and Sn, respectively. Detection limits referred to the air volume sampled (in the range of 0.020–0.050 ng m⁻³) were low enough for the determination of several hydride-forming elements from PM₁₀ and PM_2.5 samples collected in a non-polluted suburban area of A Coruña (NW Spain).     

Modeling and numerical simulation of the resistance spot welding of zinc coated steel sheets using rounded tip electrode: Analysis of required conditions

This paper investigates the essential conditions to improve the accuracy of a resistance spot welding computational study of advanced zinc coated steel sheets using rounded tip electrode. An experimental analysis is performed to highlight the required considerations for a suitable simulation. A sequential Electrical-Thermal-Metallurgical and Mechanical (ETMM) finite element analysis with appropriate precautions of the contact conditions enables to accurately simulate the nugget development during the welding. A critical smooth evolution of the contact radius is required. A fine meshing with an interfacial mesh size of at least 0.05 × 10⁻³ m combined with a coupling time step of 0.0025 s between the electrical-thermal-metallurgical and the mechanical analysis allows a regular incrementation of the contact radius, without burdening the time computing. Accurate values of the contact resistance depending on the interfacial pressure and temperature are essential for a good simulation of the nugget size. The ETMM calculation is successfully extended to the simulation of the welding of a typical two sheets assembly.     

Role of compositional changes on thermal,magnetic,and mechanical properties of Fe-P-C-based amorphous alloys

This work aimed to tune the comprehensive properties of Fe-P-C-based amorphous system through investigating the role of microalloying process on the crystallization behavior,glass forming ability(GFA),soft magnetic features,and mechanical properties.Considering minor addition of elements into the system,it was found that the simultaneous microalloying of Ni and Co leads to the highest GFA,which was due to the optimization of compositional heterogeneity and creation of near-eutectic composition.Moreover,the FeCoNiCuPC amorphous alloy exhibited the best anelastic/viscoplastic behavior under the nanoindentation test,which was owing to the intensified structural fluctuations in the system.However,the improved plasticity by the extra Cu addition comes at the expense of magnetic properties,so that the saturation magnetization of this alloying system is significantly decreased compared to the FeCoPC amorphous alloy with the highest soft magnetic properties.In total,the results indicated that a combination of added elemental constitutes,i.e.,Fe69Co5Ni5Cu1P13C7 composition,provides an optimized state for the comprehensive properties in the alloying system.     

Flexible,dicationic imidazolium salts for in situ application in palladium‐catalysed Mizoroki–Heck coupling of acrylates under aerobic conditions

The synthesis, characterization and in situ catalytic performance of new unsymmetric N,N′‐disubstituted imidazolium‐based dicationic salts in Mizoroki–Heck coupling of acrylates with aryl bromides under aerobic conditions are described. A series of flexible dicationic salts with varying steric and electronic properties were synthesized in good to excellent yields. All the salts were well characterized using spectroscopic techniques. X‐ray diffraction analysis of two salts with the same dicationic backbone and different counter anions shows that the ligand adopts two different conformations which are influenced by the nature of the anion. Thus, the ligand is capable of changing its conformation according to the change in environment due to its flexible nature. All the synthesized imidazolium salts were found to be active in in situ palladium‐catalysed Mizoroki–Heck coupling under aerobic conditions. Amongst the salts, the hydroxyl‐functionalized imidazolium salt, incorporating the features of both bidentate chelating O,O ligand and carbene, shows the maximum catalytic activity. A variety of aryl and heteroaryl methyl and ethyl cinnamates were synthesized using these imidazolium salts as preligands. In addition, NMR studies confirm in situ generation of normal N‐heterocyclic carbenes from the C‐2 position of imidazol‐2‐ylidene ring. The mercury poisoning test was also performed to ascertain the nature of catalytically active palladium species. Aerobic conditions, low catalytic loading (0.5 mol%), shorter reaction times, broad functional group tolerance and good to excellent isolated yields are some of the significant features of the novel catalytic systems described here. Copyright © 2016 John Wiley & Sons, Ltd.     

Mixed convection unsteady stagnation point flow over a stretching sheet with heat transfer in the presence of variable free stream

An analysis is performed for the unsteady mixed convection flow of an incompressible viscous fluid about a stagnation point on a stretching sheet in the presence of a variable free stream. The equations of motion and energy are transformed into the ordinary differential equations by using similarity transformations. Homotopy analysis method is used for the solution of the governing problem. The results have been discussed by plots. The present values of the function are shown very close to the previous limiting solutions. Copyright © 2011 John Wiley & Sons, Ltd.     

Application of electromagnetic processing for development of high-performance sintered powder metal parts

Electromagnetic processing was used to study the effects of electro-magneto forming on the dimensional control and thermal stability of sintered powder metal (PM) parts. The investigation was carried out on sinter-hardened, low chromium-molybdenum bainitic steel. The results show an increase in the microhardness of about 14% for the electromagnetic processed parts compared to the as-sintered parts. This was attributed to the 2% increase in the density, 17% and 29% reduction in the volume fraction of porosity and width of the bainitic lath, respectively, due to the electromagnetic processing. Dimensional characterization was carried out using a vertically aligned push-rod dilatometer. After four thermal cycles of heating and cooling, at a controlled rate of 5 °C/min to 1000 °C, the electromagnetic processed parts exhibited reduced dimensional change of about 44% lower than for the as-sintered parts. This is significantly important for applications that demand high dimensional tolerance and performance, especially at elevated temperatures.