Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

A saxpy formulation for plane rotations

An algorithm for pre- or post-multiplication of a matrix by a plane rotation, using only three vector saxpy operations instead of the four vector operations usually considered necessary, is described. No auxiliary storage for overwriting is required. The method is shown to be numerically stable.     

Statistical approach to light scattering from deformed textured heterogeneous polymer materials

A statistical theory of light scattering from deformed isotropic and textured heterogeneous polymer materials is formulated. Two types of textured structures are analyzed: assemblies of optically isotropic and anisotropic rods and a spatially anisotropic distribution of isotropic spherical inclusion centers. The small-angle H_v light-scattering patterns are calculated. The appearance of scattering from isotropic rods and spheres in deformed materials has been demonstrated. The changes of the H_v scattering patterns as a function of elongation and strucuture parameters are discussed. © 1993 John Wiley & Sons, Inc.     

Orientation and relaxation of polymer–clay solutions studied by rheology and small-angle neutron scattering

The influence of shear on viscoelastic solutions of poly(ethylene oxide) (PEO) and clay [montmorillonite, i.e., Cloisite NA+ (CNA)] was investigated with rheology and small-angle neutron scattering (SANS). The steady-state viscosity and SANS were used to measure the shear-induced orientation and relaxation of the polymer and clay platelets. Anisotropic scattering patterns developed at much lower shear rates than in pure clay solutions. The scattering anisotropy saturated at low shear rates, and the CNA clay platelets aligned with the flow, with the surface normal parallel to the gradient direction. The cessation of shear led to partial and slow randomization of the CNA platelets, whereas extremely fast relaxation was observed for laponite (LRD) platelets. These PEO–CNA networklike solutions were compared with previously reported PEO–LRD networks, and the differences and similarities, with respect to the shear orientation, relaxation, and polymer–clay interactions, were examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3102–3112, 2004     

Evaluation of the Kushida Method of short-term earthquake prediction

Kushida and Kushida found that FM radio waves from stations at distances over-the-horizon are received before earthquakes. Based on this finding, since the mid-1990’s, the Kushidas have been practicing “Earthquake Precursor Detection Experiment”. The performance of the Kushida method during 2000–2003 has been evaluated by checking their predictions against the actual seismicity. During the period, there were 92 Kushida predictions mentioning the possibility of M ≥ 5.5 event, whereas there were 49 M ≥ 5.5 earthquakes in the Japanese region. If the criteria for successful prediction are set as: the errors in date is less than one day, epicentral position is roughly within specified area, and error in M is less than 0.5, the success rate was 20% and the alarm rate was 12%. If we relax the criteria to: the errors in dates within 10 days, epicenter within additional 100 km of specified area and the magnitude error less than 1.0, the success rate was 40% and the alarm rate was 27%. These rates may look insufficient for a practical prediction method. Considering, however, the fact that no other short-term prediction has ever been made in Japan so far it is a significant achievement. Moreover, it was found that in almost all failed predictions, meaningful signals were detected although the interpretations were incorrect. This indicates that the method is promising provided further investigation is carried out. The same evaluation at the M ≥ 6.0 level showed that the general performance was similar to the M ≥ 5.5 level, except that both success rate and alarm rate were lower at the M ≥ 6.0 level. If this unexpected finding is real, it might be inherent to the methodology using scattering of short-wave length radio waves as suggested by M. Hayakawa and may contain important information in understanding the earthquake physics and LAI-coupling. The results of the present study indicate strongly that the earthquake prediction research using anomalous transmission of VHF FM radio waves should be enhanced in parallel with complementary research in other frequency ranges.     

Study on the dispersion characteristic of the plasma-loaded relativistic BWO

The dispersion characteristic of the plasma-loaded relativistic backward wave oscillator has been analyzed. The theoretical model has been established and the numerical calculations accord with the experimental results, which provides some useful suggestions on the designing of slow-wave structure of BWO.     

THE BLOW-UP PROPERLIES OF SOLUTIONS TO SEMILINEAR HEAT EQUATIONS WITH NEUMANN BOUNDARY CONDITIONS

1IntroductionInthispaper,weconsidertheinitial-boundaryvalueproblem,where"o(x)isnon-negativesmoothfunctionsatisfying"o.(0)=0,"o.(1)=1'Whenconsideringtheblow-upofsolution,thefollowingproblemarisenaturally:Doesblow-upoccur?Howdoesthesolutionapproachtheblow-uptime'!Andwilersisthehotspotlocated(blow-upset)?WelookattheheatequationwithanonlillearboundaryconditiollHerefiisaboundeddomaininR",p>1isarealnumber.IthasbeenknownforalongtimethattheDroblelil(1.1).(1.2)withAL(~,0)--'no(x)doesnothaveaglobals…     

Thermal stability of shear-induced precursor structures in isotactic polypropylene by rheo-X-ray techniques with couette flow geometry

Combined in situ rheo-SAXS (small-angle X-ray scattering) and -WAXD (wide-angle X-ray diffraction) studies using couette flow geometry were carried out to probe thermal stabilty of shear-induced oriented precursor structure in isotactic polypropylene (iPP) at around its normal melting point (162 °C). Although SAXS results corroborated the emerging consensus about the formation of “long-living” metastable mesomorphic precursor structures in sheared iPP melts, these are the first quantitative measures of the limiting temperature at which no oriented structures survive. At the applied shear, rate = 60 s⁻¹ and duration t_s = 5 s, the oriented iPP structures survived a temperature of 185 °C for 1 h after shear, while no stable structures were detected at and above 195 °C. Following Keller's concepts of chain orientation in flow, it is proposed that the chains with highly oriented high molecular weight fraction are primarily responsible for their stability at high temperatures. Furthermore, the effects of flow condition, specifically the shear temperature, on the distributions of oriented and unoriented crystals were determined from rheo-WAXD results. As expected, at a constant flow intensity (i.e., rate = 30 s⁻¹ and duration, t_s = 5 s), the oriented crystal fraction decreased with the increase in temperature above 155 °C, below which the oriented fraction decreased with the decrease in temperature. As a result, a crystallinty “phase” diagram, i.e., temperature versus crystal fraction ratio, exhibited a peculiar “hourglass” shape, similar to that found in many two-phase polymer–polymer blends. This can be explained by the competition between the oriented and unoriented crystals in the available crystallizable species. Below the shear temperature (155 °C), the unoriented crystals crystallized so rapidly that they overwhelmed the crystallization of the oriented crystals, thus depleting a major portion of the crystallizable species and increasing their contribution in the final total crystalline phase. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3553–3570, 2006     

Acrylic acid level and adhesive performance and peel master‐curves of acrylic pressure‐sensitive adhesives

Three series of pressure‐sensitive adhesives were prepared with constant glass‐transition temperature, using emulsion polymerization. The monomers chosen were butyl acrylate, 2‐ethylhexyl acrylate (EHA), methyl methacrylate (MMA), and acrylic acid (AA). Within each polymer series, the proportion of AA monomer was held constant for each polymer preparation but acrylic ester monomer levels were varied. Adhesion performance was assessed by measurement of loop tack, static shear resistance, and through the construction of peel master‐curves. Peel master‐curves were generated through peel tests conducted over a range of temperatures and peel rates and through application of the time–temperature superposition principle. Bulk effects dominated by polymer zero shear viscosity change as AA and EHA levels were varied were attributed to the observed effect on static shear resistance and the horizontal displacements of peel master‐curves. Static shear resistance was found to strongly correlate with log(a_C), a parameter introduced to horizontally shift peel master‐curves to form a superposed, “super master‐curve”. An interfacial interaction was proposed to account for deviations observed when loop tack was correlated with log(a_C). Surface rearrangements via hydrogen bonding with the test substrate were suggested as responsible for the interfacial interaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1237–1252, 2006