Temperature Dependence of the Back-Stress in Shear for Glassy Polycarbonate

Summary: Back-stress is the equilibrium stress and represents conditions under which relaxation events in the material stop and the material can carry an applied load indefinitely without a change in strain. In most models for glassy polymers, back-stress plays a central role since relaxation in materials is closely related to the distance of the current conditions from equilibrium. A number of these models that are commonly used for modeling glassy polymers use a modeling structure similar to large deformation plasticity. The flow rule for the plastic strain in these models are directly connected to the “over-stress,” a properly invariant difference between the stress and the back-stress. The importance of correctly evaluating the back-stress to use in these models is clear. For this class of models, the authors have recently developed a method for directly calculating the back-stress under shear deformations. This method is based on evaluating the slope of the stress-strain response under conditions of similar elastic and plastic strain, but different strain rates. Since plastic flow goes to zero at equilibrium, the back-stress can be found by locating points of zero plastic strain rate. Using the proposed method, the back-stress in glassy polycarbonate has been evaluated under shear in isothermal tests going from room temperature to 120 °C, just below the glass transition temperature for polycarbonate. The proposed method provided a full map of the back-stress for polycarbonate over a large range of shear strain and temperature.     

Influence of hybridization on in-plane shear properties of 2D & 3D thermoplastic composites reinforced with Kevlar/basalt fabrics

This paper investigates the characterization of in-plane shear properties of thermoplastic composites reinforced with Kevlar/basalt fabrics. Different fabrics had architectures of two dimensional plain woven (2D-P) and three dimensional angle-interlock (3D-A). Intralayer hybridization was performed during the weaving of the fabrics with the combination of Kevlar and basalt yarns. Five 2D-P and three 3D-A composite laminates were manufactured with polypropylene (PP) as a matrix, using compression molding. Iosipescu shear tests were carried out to evaluate the in-plane shear properties. The experimental results revealed that the shear properties including shear modulus, shear strength and shear failure strain of homogeneous composites were improved by 6.5–14.9%, 4.3–19.7%, and 3.2–46.7%, respectively. Similarly, change in the fabric architecture from 2D-P to 3D-A also enhanced the shear strength and shear failure strain by 32.0–41.6% and 7.2–22.5%, respectively. Intralayer hybrid composites had better in-plane shear properties than the interlayer hybrid composites. The fracture morphologies of the specimens were examined by scanning electron microscopy (SEM).     

Dynamic Docking and Undocking Processes Addressing Selectively the Outside and Inside of Polymersomes

Increasing complexity and diversity of polymersomes and their compartments is a key issue for mimicking cellular functions and protocells. Thus, new challenges arise in terms of achieving tunable membrane permeability and combining it with control over the membrane diffusion process, and thus enabling a localized and dynamic control of functionality and docking possibilities within or on the surface of polymeric compartments. This study reports the concept of polymersomes with pH‐tunable membrane permeability for controlling sequential docking and undocking processes of small molecules and nanometer‐sized protein mimics selectively on the inside and outside of the polymersome membrane as a further step toward the design of intelligent multifunctional compartments for use in synthetic biology and as protocells. Host–guest interactions between adamantane and β‐cyclodextrin as well as noncovalent interactions between poly(ethylene glycol) tails and β‐cyclodextrin are used to achieve selective and dynamic functionalization of the inner and outer spheres of the polymersome membrane.     

高残炭硼酚醛树脂的制备

酚醛树脂(PF)因其具有良好的耐热性能和机械性能而被广泛应用。但其耐热性能已经满足不了现代航空航天技术的需求,研究发现,采用硼酸对酚醛树脂进行改性,可以制得具有优良耐高温性能的硼酚醛树脂(BPF)。采用硼酸酯法合成硼酚醛树脂,n(苯酚)∶n(甲醛)=1∶1.5时耐热性最佳。热分析结果表明,合成的BPF在1000℃条件下的残炭率为78%,其耐热性能明显优于传统的酚醛树脂。同时讨论了不同硼酸含量对BPF耐热性能的影响,当n(硼酸)∶n(苯酚)0.33∶1时,残炭率趋于稳定。此外,利用差示扫描量热仪(DSC)方法确定BPF预固化温度为160℃,后固化温度为220℃。     

Synthesis of linseed oil based biodegradable homo and copolymers: role as multifunctional greener additives in lube oil

Abstract

Homopolymer of linseed oil and its four copolymers with styrene, 1-decene, isodecyl acrylate and octyl acrylate, respectively, have been synthesized in this present context. The prepared polymers are characterized by NMR and FTIR spectroscopy. The molecular weights have been measured by gel permeation chromatography. Their effectiveness as pour point depressant (PPD), viscosity index improver (VII) and their shear stability in terms of permanent shear stability index have been evaluated in lube oil. The copolymers acted as better PPDs than the homopolymer whereas the homopolymer of linseed oil excelled as VII. Further it was observed that all the prepared polymers were stable enough under severe mechanical shear.     

Surface modification of PBO fibers with 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane in supercritical carbon dioxide for enhancing interfacial strength

PBO fiber is one of the most promising reinforcements in resin matrix composite because of its excellent mechanical properties. However, the inert and smooth surfaces make it the poor interface adhesion with resin matrix, which seriously limits the application in composites. In this article, we report a method to modify the surface of PBO fibers with 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane（BisAPAF）in supercritical CO₂ to enhance interfacial properties. Chemical structures, surface elemental composition and functional groups, and surface morphology were characterized by FT-IR spectrometer, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), respectively. The mechanical properties of the samples were tested by a tensile tester. Static contact angle and microdebonding tests were used to characterize the wetting ability and interfacial shear strength (IFSS) of the fiber and epoxy resin. The results showed that the BisAPAF could be solved in scCO₂ and introduced more groups, –NH₂, –OH, and –CF₃ on the fiber surface, resulting in the mechanical properties and the wettability of PBO fiber slightly improved. Moreover, the fiber surface roughness was also increased obviously. The IFSS between the modified PBO fiber and epoxy resin increased from 8.18 MPa to 31.4 MPa when the treating pressure was 14 MPa. In general, the method to modify PBO fibers surface using BisAPAF in scCO₂ can effectively improve their interfacial properties.     

长链支化聚丙烯的非线性流变行为

通过大幅振荡剪切试验方法, 研究了长链支化聚丙烯的非线性流变学行为, 揭示了长链支化结构与非线性黏弹响应的关系. 利用傅里叶变换流变学方法得到试样的三次倍频相对振幅I_3/1与应变的标度关系, 用于界定线性聚丙烯和长链支化聚丙烯非线性流变行为的差异, 并定义了非线性系数来量度长链支化程度. 在高应变下, I_3/1与应变的变化关系可以进一步描述长链支化在非线性流场下的特性, 并得到了长链支化程度与其非线性响应之间的变化关系. 通过应力波的Lissajous曲线分解, 发现了环内和环间黏弹性的差异, 长链支化结构在大应变流场下的非线性黏弹性响应弱于线性结构, 支化程度越高非线性响应越弱.     

Static Retention of Dynamic Chiral Arrangements for Achiral Shear Thinning Metal–Organic Colloids

Chiral compounds are known to be important not only because they are the fundamental components of living organisms, but also for their unique chiroptical properties. In recent years, scientists have fabricated several chiral organic supramolecular aggregates by using chiral physical fields, such as vortex flow. Herein, the relationship between dynamic chiroptical properties and rheological nature is discussed, suggesting the shear thinning properties of non-Newtonian fluids might help colloidal particles adopt a chiral arrangement in vortices. Furthermore, the storage modulus of colloids could be increased by adding a linking agent, which successfully kept the dynamic chiroptical properties in the static state. Moreover, the salt effect on the host–guest interaction involved in the colloids was studied, the results suggested a significant enhancement of the transferred dynamic circular dichroism for the achiral guest molecule.     

Heterogeneous/homogeneous and inclined magnetic aspect of infinite shear rate viscosity model of Carreau fluid with nanoscale heat transport

The study of the inclined flow along with the heterogeneous/homogeneous reactions in the fluid has been widely used in many industrial and engineering applications, such as petrochemical, pharmaceutical, materials science, heat exchanger design, fluid flow through porous media, etc. The purpose of this study is to present an infinite shear rate viscosity model using the inclined Carreau fluid with nanoscale heat transport. The model considers the effect of inclined angle on the fluid’s viscosity and the transfer of heat at the nanoscale. The result shows that the viscosity of the fluid decreases by increasing the inclination angle and the coefficient of heat transfer also increases with the inclination. The model can be used to predict the viscosity and heat transfer fluid’s behavior in the inclined systems that is widely used in the industrial and engineering applications. The results provide a better understanding of the inclined flow behavior of fluids and the heat transfer at the nanoscale, which can be useful in heat exchanger design, fluid flow through porous media, etc. Greater Infinite shear rate viscosity parameter gives the higher magnitude of Carreau fluid velocity. Moreover, inclined magnetic field reduces the velocity due to Lorentz force. Two numerical schemes are used to solve the model, BVP4C and Shooting.     

一种新的计算Timoshenko梁截面剪切系数的方法

Timoshenko梁理论中考虑了截面剪切变形的影响,推导了一种新的计算剪切系数的方法,首先采用悬臂梁纯弯曲变形条件下截面剪应力分布的精确解,基于能量原理得到了各种梁截面剪切系数新的表达式,然后推导了弯扭耦合变形条件下截面剪应力分布的精确解,进一步获得了该条件下截面的剪切系数.结果表明,悬臂梁端面作用力偏离截面的弯曲中心将使剪切系数变小,通过与Cowper计算结果的对比发现结果偏小,其原因是Cowper没有考虑与外力垂直的剪应力的影响,因此新的计算结果更优越.