Consistency of surface mechanical properties of spread protein layers at the liquid–air interface at different spreading conditions

Π/A isotherms of spread β-lactoglobulin and β-casein at the air–water interface are measured under different spreading conditions. While the isotherms do not show drastic effects of the spreading concentration and the compression rate the interfacial shear rheological behaviour is significantly influenced. In particular, the shear viscosity of β-lactoglobulin layers depend directly on the spreading concentration. Significant viscosity increase is obtained at larger surface pressures when the spreading concentration is increased. In contrast the shear rheology of the spread β-casein layers can be normalised by plotting the viscosities as a function of the surface pressure Π. The different behaviour is discussed in terms of denaturation of the β-lactoglobulin during the monolayer formation process by adsorption from the spread thin protein solution layer.     

Mechanical properties of jammed packings of frictionless spheres under an applied shear stress

By minimizing a thermodynamic-like potential, we unbiasedly sample the potential energy landscape of soft and frictionless spheres under a constant shear stress. We obtain zero-temperature jammed states under desired shear stresses and investigate their mechanical properties as a function of the shear stress. As a comparison, we also obtain the jammed states from the quasistatic-shear sampling in which the shear stress is not well-controlled. Although the yield stresses determined by both samplings show the same power-law scaling with the compression from the jamming transition point J at zero temperature and shear stress, for finite size systems the quasistatic-shear sampling leads to a lower yield stress and a higher critical volume fraction at point J. The shear modulus of the jammed solids decreases with increasing shear stress. However, the shear modulus does not decay to zero at yielding. This discontinuous change of the shear modulus implies the discontinuous nature of the unjamming transition under nonzero shear stress, which is further verified by the observation of a discontinuous jump in the pressure from the jammed solids to the shear flows. The pressure jump decreases upon decompression and approaches zero at the critical-like point J, in analogy with the well-known phase transitions under an external field. The analysis of the force networks in the jammed solids reveals that the force distribution is more sensitive to the increase of the shear stress near point J. The force network anisotropy increases with increasing shear stress. The weak particle contacts near the average force and under large shear stresses it exhibit an asymmetric angle distribution.     

激光冲击强化“残余应力洞”的形成机制

利用ABAQUS有限元软件进行了单个圆形高斯光斑的激光冲击强化数值模拟,分析材料表面光斑中心区域形成的"残余应力洞"现象,并通过分析材料的动态力学响应特征揭示了"残余应力洞"的形成机制。结果表明:在冲击波加载时,光斑边界处会产生很强的剪切应力,形成向四周传播的表面稀疏波和向材料内部传播的剪切波。当稀疏波同时传播到光斑中心,发生相遇、汇聚,使材料产生急剧的上下位移过程,造成冲击波加载塑性变形后的二次塑性变形。二次塑性变形中形成了较大的剪切塑性应变,并降低了冲击波加载阶段产生的轴向和径向塑性应变,使残余压应力降低,从而形成"残余应力洞"。     

Computer Simulation of Non-Newtonian Flow and Mass Transport Through Coronary Arterial Stenosis

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｍｏｓｔｏｂｖｉｏｕｓｃｈａｒａｃｔｅｒｏｆａｔｈｅｒｏｓｃｌｅｒｏｓｉｓｉｓｔｈｅｌｏｃａｌｉｎｔｉｍａｌａｃｃｕｍｕｌａｔｉｏｎｏｆｌｏｗ＿ｄｅｎｓｉｔｙｌｉｐｏｐｒｏｔｅｉｎ(ＬＤＬ) ,ｔｈｅｉｎｃｒｅａｓｅｏｆｔｈｅｆｉｂｅｒａｌｔｉｓｓｕｅａｎｄｔｈｅｓｔｅｎｏｓｉｓ.Ｏｎｏｎｅｈａｎｄ ,ｉｔｉｓｆｏｕｎｄｔｈａｔｔｈｅｄｉｓｅａｓｅｏｆｔｅｎｏｃｃｕｒｓａｔｔｈｅｃｏｍｐｌｅｘｇｅｏｍｅｔｒｙｒｅｇｉｏｎ ,ｓｕｃｈａｓｂｉｆｕｒｃａｔｉｏｎｚｏｎｅ,ｃｕｒｅ…     

动态载荷下剪切变形局部化、微结构演化与剪切断裂研究进展

总结和评述了近年来金属与合金变形局部化的形成、微结构演化与剪切断裂方面作者和相关的研究工作成果. 材料包括低碳钢, SS304不锈钢, Fe-15%Ni-15%Cr单晶, Al-Li合金,α-Ti和Ti-6Al-4V, Al/SiCp复合材料等.综述内容主要包括:采用改进的Hopkinson扭杆装置,对剪切变形局部化形成、发展和演化过程进行了实验观察与数值模拟;采用"侧剖"与"对接"等定点方法制备电子显微镜薄膜试样,对剪切带内相变与再结晶、非晶转变、旋涡结构等动态变形现象,以及与宏观动态力学行为对应的位错胞的形成、发展和坍塌等微结构特征进行了观测;提出了应变和应变率同时作为剪切带形成的两个必要条件的直接实验证据;在剪切带内发现了α'$-马氏体相变现象,以及相变产物与母体之间的晶体学关系;通过位错单滑移或交滑移等微观剪切最后发展成为宏观剪切的机制;对剪切带内再结晶结构的观测和对再结晶动力学本构关系的定量描述;对剪切带特别是``白色'腐蚀带(或相变带)的形成机制的分析和新的解释,指出 ``白色'是带内亚结构取向趋于一致,其在光学或扫描显微镜下很难辨认这些亚结构的取向差所致,并非表明剪切带内一定发生了相变;通过截断实验和实时跟踪观测发现,剪切带内微裂纹的萌生与聚合是材料承载能力骤然下降并导致最后断裂的主控因素.此外,本文对近年来在准静态和循环加载下材料的局部化形变与剪切断裂的实验结果予以简要评述,指出其微观机制与动态载荷下的截然不同, 是由位错的平面滑移所控制的,与热效应无关的等温变形.      

Stress concentration around a circular hole in a transversely isotropic spherical shell

Analytical expressions for the stresses near a circular hole in a transversely isotropic shallow spherical shell under uniform pressure are derived. The form of the solution depends on the range of change in the compliance to transverse shear. The influence of the relative radius of the hole and the compliance to transverse shear on the stress concentration is analyzed.__________Translated from Prikladnaya Mekhanika, Vol. 40, No. 12, pp. 99–106, December 2004.     

大型反倾库岸岩体变形过程及破坏机制数值模拟

随着边坡地质结构、地层岩性和诱发因素的不同,反倾岩体的主控变形破坏模式都会发生改变。金沙江龙蟠边坡岩体主要为反倾向千板岩和砂岩互层状结构,坡脚河床深厚覆盖层构成了边坡的软弱支座。本文运用离散单元法模拟了大型反倾库岸岩体在漫长的地质历史时期中的变形演化过程,并基于反倾岩体变形的时效性观点,引入强度折减法分析边坡在不同阶段的剪切屈服区扩展情况及相应的稳定性状态。结论表明龙蟠边坡变形岩体是重力弯曲蠕变为主导的成因机制,并归纳提出了软基效应和互层效应共同作用下的大规模反倾岩体的累进性剪切破坏模式,俗称“龙蟠模式”。     

超声速流动中非线性EASM湍流模式应用研究

针对超声速复杂流动区域精确模拟的需要,发展了基于k-ω可压缩修正形式的非线性显式代数雷诺应力模式（EASM）,提高了该模式对超声速复杂流动的数值模拟精度。通过对二维超声速凹槽和三维双椭球的数值计算表明,与SA和SST常规线性涡黏性湍流模式比较,非线性的EASM模式对大分离以及剪切层流动结构的刻画能力更精细,对剪切层再附区的压力及摩擦系数分布模拟更加精确;EASM模式能够准确地模拟二次激波引起的压强和热流分布情况。     

Viscous and dielectric properties of α-tocopherol and α-tocopherol acetate

This article presents the results of the shear viscosity and the dielectric relaxation measurements performed for α-tocopherol and α-tocopherol acetate, two principal compounds from the vitamin E group. The temperature dependence of the viscosity and dielectric relaxation time of the compounds can be very well reproduced with the Vogel–Fulcher–Tammann equation. It was found that for both tocopherols, the viscosity and the relaxation time attain their infinite high value (solid-like state) at the temperature of ～60 K below the transition to the glass state.     

TC4钛合金自然破片的引燃机理分析

对两种热处理条件不同的ＴＣ４钛合金圆筒在内部爆轰加载下的自然破片形成过程作了研究，并对破片的宏观断裂特征和细观断裂机理进行了分析。研究结果表明，一些引燃战斗部采用钛合金壳体的根本原因在于利用壳体破裂时形成的高温绝热剪切带和钛元素本身在高温下的剧烈氧化性。