Structure,Chirality, and Formation of Giant Icosahedral Fullerenes and Spherical Graphitic Onions

We describe the topology, structure, and stability of giant fullerenes exhibiting various symmetries (I, I _h , D _2h , T). Our results demonstrate that it is possible to create two new families of nested chiral icosahedral (I) fullerenes namely C₂₆₀@C₅₆₀@C₉₈₀@C₁₅₂₀@, ...,and C₁₄₀@C₃₈₀@C₇₄₀@C₁₂₂₀@ ..., which exhibit interlayer separations of ca. 3.4 Å. These chiral fullerenes are thought to possess metalliclike conduction properties. We discuss in detail the transformation of polyhedral graphitic particles into quasispherical nested giant fullerenes by reorganization of carbon atoms, which result in the formation of additional pentagonal and heptagonal carbon rings. These spherical structures are metastable and we believe they could be formed under extreme conditions, such as those produced by high-energy electron irradiation. There is circumstantial experimental evidence for the presence of heptagonal rings within these spherical fullerenes.     

掺碳球形Ni(OH)2的特性

电子导电剂;充放电特性;掺碳球形Ni(OH)2的特性     

液相还原法制备超细球形镍粉

本文论述了液相还原法直接制备高振实密度球形镍粉的新工艺。采用NiSO_4·5H_2O为原料,利用NaOH调节溶液的pH值并形成Ni(OH)_2,还原剂采用N_2H_4·H_2O,还原过程中加入晶核引发剂及表面活性剂。采用正交实验表安排实验,对影响镍粉振实密度及粒径的因素进行了极差分析。实验数据表明,溶液中镍的初始浓度对产品质量的影响最大,较优工艺组合条件为:初始Ni~(2+)的浓度1.5mol·L~(-1),NaOH用量为理论量的1.1倍,反应温度80℃,表面活性剂用量为每克镍5mg,晶种添加量为还原剂理论用量的0.1％。新工艺可制备振实密度高达3.0以上、质量中位径为1μm的球形镍粉。     

Colloidal liquid crystal type assemblies of spheroidal polystyrene core/polyglycidol‐rich shell particles (P[S/PGL]) formed at the liquid‐silicon‐air interface by a directed dewetting process

A method for the preparation of stripe‐like monolayers of microspheroids is described. The particles were obtained from polystyrene core/polyglycidol‐rich shell microspheres by stretching poly (vinyl alcohol) films that contain embedded particles. The stretching was performed under controlled conditions at temperatures above the T_g of the films and particles. The elongated films were dissolved in water, and the microspheroids were subsequently removed and purified from the poly (vinyl alcohol). The aspect ratio (AR) of the particles, which denotes the ratio of the lengths of the longer to shorter particle axes, was determined by the film elongation. The AR values were in the range of 2.9‐7.7. Spheroidal particles with various ARs were deposited onto silicon wafers from an ethanol (EtOH) suspension. The particle concentration and volume of the suspension were the same in each experiment. Evaporation of the EtOH yielded stripes of spherical particles packed into nematic‐type colloidal crystals and assembled into monolayers. The orientation of the stripes after ethanol evaporation was perpendicular to the triphasic (silicon‐ethanol‐air) interface along the silicon substrate. The adsorbed stripes on the wafers were characterized in terms of their interstripe distance (ID), stripe width, and crystal domain size. Nematic‐type spheroid arrangements in the stripes were the dominant structure, which enabled denser packing of the particles into colloidal crystals than that allowed by the smectic‐type arrangements. Furthermore, the number of spheroids adsorbed per surface unit of the silicon wafers was similar for all ARs, but the width and frequency of the spheroid stripes adsorbed on the wafers were different.     

烷基苯磺酸盐表面活性剂对水合硅酸钙形貌和结构的影响

利用十二烷基苯磺酸钠(SDBS)为模板剂, 研究了SDBS的浓度、 Ca ²⁺和Si {\mathrm{O}}_3^{2-} 离子的浓度、 是否搅拌和反应时间等条件对水合硅酸钙(CSH)形貌特征和分散性能的影响, 并提出了不同CSH球壳形貌特征的形成机理. 结果显示, 溶液中Na₂SiO₃·9H₂O浓度增大、 SDBS浓度增大及反应时间延长均会使CSH的结晶度变好, 聚合度增大, Q ²结构的相对含量增加, 其中Na₂SiO₃·9H₂O和SDBS浓度是主要控制因素. SDBS在溶液中形成的球形胶束具有极强的模板作用, 能有效改变CSH的结晶生长方式; 通过调节SDBS浓度和钙硅比例, 并适当延长CSH的生长时间, 能够获得球壳完整、 分散性好且稳定性强的CSH.     

Hierarchical FeCo2S4@FeNi2S4 Core/Shell Nanostructures on Ni Foam for High-Performance Supercapacitors

The design of electrode materials with rational core/shell structures is promising for improving the electrochemical properties of supercapacitors. Hence, hierarchical FeCo₂S₄@FeNi₂S₄ core/shell nanostructures on Ni foam were fabricated by a simple hydrothermal method. Owing to their structure and synergistic effect, they deliver an excellent specific capacitance of 2393 F g⁻¹ at 1 A g⁻¹ and long cycle lifespan as positive electrode materials. An asymmetric supercapacitor device with FeCo₂S₄@FeNi₂S₄ as positive electrode and graphene as negative electrode exhibited a specific capacitance of 133.2 F g⁻¹ at 1 A g⁻¹ and a high energy density of 47.37 W h kg⁻¹ at a power density of 800 W kg⁻¹. Moreover, the device showed remarkable cycling stability with 87.0 % specific-capacitance retention after 5000 cycles at 2 A g⁻¹. These results demonstrate that the hierarchical FeCo₂S₄@FeNi₂S₄ core/shell structures have great potential in the field of electrochemical energy storage.     

High Refractive-Index Microspheres as Optical Cavity Structure

Microspheres of refractive index of n_D > 2.0 have been investigated. The organic-inorganic hybrid microspheres of n_D = 1.72 were prepared by the vibrating orifice technique using titanium-tetra-n-butoxide (TTBu) and diphenyldimethoxysilane (DPhDMS). For lasing demonstration, Eu³⁺-doped microspheres were prepared using europium (III) thenoyltrifluoroacetonate [Eu(TTFA)₃] as the dopant. The particles have good spherical shape, smooth surface and high optical transparency. The diameters of the particles could be controlled to within 0.1 m. Subsequent heating of the microspheres at 550°C under oxygen atmosphere resulted in an increase in the refractive index up to n_D = 2.6 with retention of the spherical shape. Resonant emission was confirmed from Eu^{3 +}-doped microspheres after heating at 400–550°C, by pumping with the 514.5 nm line of a CW- Ar⁺laser.     

Rapid simultaneous determination of isoflavones in Radix puerariae using high-performance liquid chromatography-triple quadrupole mass spectrometry with novel shell-type column

A high-performance liquid chromatography (HPLC) coupled with triple quadrupole mass spectrometry (MS/MS) method was developed for rapid determination of 13 isoflavones in Radix puerariae. A novel shell-type column, namely Kinetex core-shell C(18) column (50 mm×2.1 mm id, 2.6 μm), and gradient elution were used during the analysis. The chromatographic peaks of 13 investigated compounds were identified by comparing their retention time and MS data with the related reference compounds. Multiple-reaction monitoring (MRM) was employed for the quantitative analysis with negative ionization mode. All calibration curves showed good linearity (r(2)>0.9990) within test ranges. The LOD and LOQ were lower than 0.017 and 0.873 μg/mL on column, respectively. The intra- and inter-day precisions for 13 analytes were <1.17 and 2.17%, respectively, and the recoveries were 93.1-104.4%. The validated method was applied for quantitative analysis of 13 isoflavones in 7 species of Radix puerariae. The result demonstrated that HPLC-MS/MS system with Kinetex column could be a promising analytical tool for the determination of isoflavones in traditional Chinese medicines, which is helpful for comprehensive evaluation of quality of R. puerariae.     

Electronic structure and thermochemical properties of silicon-doped lithium clusters Li(n)Si0/+, n = 1-8: new insights on their stability

A theoretical investigation on small silicon-doped lithium clusters Li(n)Si with n = 1-8, in both neutral and cationic states is performed using the high accuracy CCSD(T)/complete basis set (CBS) method. Location of the global minima is carried out using a stochastic search method and the growth pattern of the clusters emerges as follows: (i) the species Li(n)Si with n ≤ 6 are formed by directly binding one Li to a Si of the smaller cluster Li(n-1)Si, (ii) the structures tend to have an as high as possible symmetry and to maximize the coordination number of silicon. The first three-dimensional global minimum is found for Li(4)Si, and (iii) for Li(7)Si and Li(8)Si, the global minima are formed by capping Li atoms on triangular faces of Li(6)Si (O(h)). A maximum coordination number of silicon is found to be 6 for the global minima, and structures with higher coordination of silicon exist but are less stable. Heats of formation at 0 K (Δ(f)H(0)) and 298 K (Δ(f)H(298)), average binding energies (E(b)), adiabatic (AIE) and vertical (VIE) ionization energies, dissociation energies (D(e)), and second-order difference in total energy (Δ(2)E) of the clusters in both neutral and cationic states are calculated from the CCSD(T)/CBS energies and used to evaluate the relative stability of clusters. The species Li(4)Si, Li(6)Si, and Li(5)Si(+) are the more stable systems with large HOMO-LUMO gaps, E(b), and Δ(2)E. Their enhanced stability can be rationalized using a modified phenomenological shell model, which includes the effects of additional factors such as geometrical symmetry and coordination number of the dopant. The new model is subsequently applied with consistency to other impure clusters Li(n)X with X = B, Al, C, Si, Ge, and Sn.