FINITE LAYER ANALYSIS FOR SEMI-INFINITE SOILS (Ⅰ)——GENERAL THEORY

In the present paper a finite layer method is studied for the elastodynamics of transverse isotropic bodies. With this method, semi-infinite soils can be considered as an transverse isotropic half-space, its material functions varying with depth. Dividing the half.space into a series of layers in the direction of depth the material fimetioms in each layer are simulated by exponential fumctions Consequently, the fundamental equations to be solved can be simplified if the fouricr transform with repsect to coordinates is used. We have obtained the relationship between the "layer forces" and "layer displacements". This finite layer method, in fact, can also be called a semi-analytical method. It possesses those advantages as the usual semi-analytical methods do, and can be used to analyse the problem of the interaction between soils and structures.     

A NEW METHOD TO DETERMINE THE R-CURVE OF CERAMICS-FRACTURE GRATING METHOD

The etching technique of the single-lined zero-thickness specimen grating is applied tothe surface of the SiC fiber toughening Si_3N_4 ceramic composite specimen.The position of the crackand the crack length during the process of crack extension when the load is applied and gradually in-creased can be determined by recording the output voltage value of the Wheatstone bridge in which theceramic specimen with the fracture grating on is located.The crack-growth-resistance(R-curve) of thismaterialis thus obtained.     

平面弹性介质多孔多裂纹问题的一种数值方法

提出了平面弹性介质中多孔洞多裂纹相互作用问题的一种数值计算方 法. 通过把适于单一裂纹的Bueckner原理扩充到含有多孔洞多裂纹的一般体系，将原问题 分解为承受远处载荷不含裂纹不含孔洞的均匀问题，和在远处不承受载荷但在裂纹面上和孔 洞表面上承受面力的多孔洞多裂纹问题. 于是，以应力强度因子作为参量的问题可以通过考 虑后者(多孔洞多裂纹问题)来解决，而利用提出的杂交位移不连续法，这种多孔 洞多裂纹问题是容易数值求解的. 算例说明该数值方法对分析平面弹性介质中多孔洞多裂纹 相互作用的问题既简单又有效.     

基于局域分析的疲劳短裂纹群体演化随机模型

采用局域裂纹数密度描述金属材料中不同局部区域的疲劳短裂纹群体损伤的发展情况通过考虑在不同局域存在的材料性质的随机涨落及局部损伤对损伤总量发展的影响，建立了局域裂纹数密度演化随机方程对方程数值求解从而模拟了材料的疲劳短裂纹损伤过程结果显示出主裂纹出现的随机性，并讨论了裂纹总数与最大裂纹尺度在统计意义上的演化特征     

三维裂纹问题的高精度数值解法

提出了一种求解三维均质弹性体中任意形状平片裂纹问题超奇异积分方程组的Chebyshev多项式数值解法。数值计算结果表明：文中方法不仅收敛快，而且精度高。     

具有半边裂纹导电薄板放电瞬间的温度场数值模拟

采用数值模拟方法 ,模拟计算了具有半边裂纹的导电薄板在放电瞬间的温度场分布。计算结果表明 :在裂纹尖端附近由于电磁热的集中效应 ,可使材料熔化形成焊口 ,裂纹尖端处的曲率半径显著增大 ,并且焊口的温度分布与形状是不完全对称的。裂纹尖端焊口形状的模拟计算结果与试验结果非常吻合。从温度梯度的分布结果可知 ,裂纹前缘附近在放电过程中将产生很大的压应力 ,可显著减少甚至是消除裂纹前缘处的扩展应力数值 ,抑制了裂纹主干线的形成 ,可达到遏制裂纹扩展的目的     

Molecular dynamics simulation of crack-tip processes in copper

The crack tip processes in copper under mode II loading have been simulated by a molecular dynamics method. The nucleation, emission, dislocation free zone (DFZ) and pile-up of the dislocations are analyzed by using a suitable atom lattice configuration and Finnis & Sinclair potential. The simulated results show that the dislocation emitted always exhibits a dissociated fashion. The stress intensity factor for dislocation nucleation, DFZ and dissociated width of partial dislocations are strongly dependent on the loading rate. The stress distributions are in agreement with the elasticity solution before the dislocation emission, but are not in agreement after the emission. The dislocation can move at subsonic wave speed (less than the shear wave speed) or at transonic speed (greater than the shear wave speed but less than the longitudinal wave speed), but at the longitudinal wave speed the atom lattice breaks down. The project supported by the National Natural Science Foundation of China     

含椭圆孔或裂纹的等参数正交异性板平面问题基本解

应用Ｃａｕｃｈｙ积分的方法，分别给出了含椭圆孔或裂纹的等参数正交异性板在任意面内集中载荷作用下的复应力函数基本解或应力强度因子基本解，这些基本解对于应用边界元法求解此类正交异性板或各向同性板的某些弹性力学和断裂力学问题具有重要的意义。     

穿透短裂纹扩展趋偏现象的模型分析和实验研究

本文揭示了穿透短裂纹疲劳扩展中的一个特性－趋偏扩展特性。这一特性是穿透短裂纹预测和测试中产生偏问题的根本原因。通过对长、短裂纹扩展特性及主要影响因素的分析，提出了进行穿透短裂纹试验时必须注意的若干事项。     

Singular behaviour and asymptotic stress field of a crack terminating at a bimaterial interface

A crack terminating at an interface of two dissimilar elastic materials is investigated. It is found that the asymptotic stress field near the crack tip is in general composed of two parts with each part being characterized by one singularity. The detailed relation of the two singularities with the bimaterial properties is given for some special cases of the crack.