正交各向异性矩形板受迫振动的三维分析

从正交各向异性三维弹性动力学的控制方程出发，在求得四边简支矩形板自由振动频率和位移振型的基础上，构造了受迫振动的位移函数；利用自由振动位移振型的正交性，将控制方程的空间变量和时间变量分离，得到了广义质量、广义力和频率表示的关于时间的2阶常微分方程，从而得到了正交各向异性弹性矩形板在受迫振动下的位移场和应力场．给出了本文方法与薄板理论的算例．     

光纤传感振动检测系统及其实验研究

实际工程结构中的振动检测是十分重要的，也是十分复杂的，常用的结构振动检测传感器易受工程现场恶劣环境的影响．而光纤传感器具有小巧、抗电磁干扰、灵敏度高、适合长期监测等优点。本文建立了基于马赫—曾德(Mech-Zehnder)干涉原理的光纤传感振动检测系统．研制了运用先进的数字信号处理技术采集和处理数据的专用软件，并在典型结构件——钢制悬臂梁结构上进行了外加信号作用下的强迫振动检测和冲击载荷作用下的自由衰减振动检测，测量了该结构件的频率及振幅，其结果与同时进行的成熟的电测结果相近，说明光纤传感器用于结构件的振动测量是可靠的。本文为光纤传感器应用于实际工程的振动检测提供了新的技术装置，具有工程应用前景。     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Partial molal volumes of ions in organic solvents from ultrasonic vibration potential and density measurements. III. Dimethylsulfoxide

The partial molal volumes of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Cl^–, Br^–, I^–, and NO ₃ ^- in DMSO at 25°C have been determined from ultrasonic vibration potential data and density data for solutions of uni-univalent electrolytes. Hepler's semiemprirical equation has been used to split ionic partial molal volumes into geometric and electrostrictive contributions. The results obtained in this work confirm the conclusion of our previous studies, namely, that the contribution of electrostriction is essentially determined by the properties of that layer of atoms, 0.3 to 0.4 nm thick, in contact with the ion and by the degree of steric hindrance of the poles of the dipole of the solvent molecule. On the other hand, the geometric contribution depends on the size of the solvent molecule and also on the arrangement of the solvent molecules about the ions. It is shown that the geometric contribution to the partial molal volume of ions is largely increased when ions cannot come close enough to the poles of the solvent-molecule dipole, owing to steric hindrance.     

次级源和误差传感器布放对带弹性障板的充液直管声振复合有源控制的影响*

针对充液管路系统噪声有源控制问题,研究了次级源和误差传感器布放对带弹性障板的充液直管管路系统有源消声与有源消振复合控制效果的影响。基于声固耦合方法建立了带弹性障板的充液直管管路系统的有限元模型,在声激励下对比了次级声源布放对系统有源消声性能的影响,并在组合激励下分析了次级力源、次级声源和误差传感器布放对系统复合有源控制的影响。结果表明,非对称分布的次级声源容易激起管壁振动,进而带动障板振动,导致有源消声效果不佳;采用对称分布的次级声源可使低频段的降噪量提高10 dB以上。复合有源控制可进一步提升全频段的控制效果。通过增加振动误差传感器数量,可使绝大多数频点的降噪量提高1~20 dB不等。此外,在管壁上布放的两圈次级力源的间距小于管壁振动波长的1/4,且都不位于管壁振动节点附近时控制效果更好。     

振动噪声等高图的电驱动桥噪声预测及优化*

在项目开发前期通过优化电驱动桥扭矩特性的设计,可以规避噪声大问题。根据电驱动桥台架在对应扭矩下的振动噪声特性,提出了一套稳定高效的测试流程和分析方法。首先设计了一套完整的试验流程,制定了精准的数据分析方法。然后绘制出能够全面反映电驱动桥振动噪声特性的等高图。最后利用电驱动桥台架的振动噪声等高图,准确评估电驱动桥加速工况下振动噪声风险,为主机厂和电驱动桥零部件企业提供电驱动桥扭矩特性设计前期指导。利用该方法成功识别到某电驱动桥匀速及加速工况下电机及齿轮的啸叫问题。通过优化电驱动桥扭矩特性设计,电机48阶噪声峰值降低了8.5dB(A),确认该方法准确可靠,具备推广应用价值。     

Three‐dimensional computation for flow‐induced vibrations in in‐line and cross‐flow directions of a circular cylinder

We present numerical results for in‐line and cross‐flow vibrations of a circular cylinder, which is immersed in a uniform flow and is elastically supported by damper‐spring systems to compute vibrations of a rigid cylinder. In the case of a circular cylinder with a low Scruton number, it is well‐known that two types of self‐excited vibrations appear in the in‐line direction in the range of low reduced velocities. On the other hand, a cross‐flow vibration of the circular cylinder can be excited in the range of high reduced velocities. Therefore, we compute the flow‐induced vibrations of the circular cylinder in the wide range of the reduced velocities at low and high Scruton numbers and discuss about excitation mechanisms in the in‐line and cross‐flow directions. Copyright © 2011 John Wiley & Sons, Ltd.     

工作机械相对振动的研究

本文对工作机械的相对振动进行了理论和实验研究。分析了相对振动的激励和合成原理,提出了工件和工具同相振动和异相振动、同相域以及相对振动放大因子等概念。在此基础上指出了减小相对振动的途径,以作为设计和改造工作机械的参考。     

迷宫密封不平衡转子动力系统的稳定性与分岔

研究迷宫密封对不平衡转子系统动力稳定性的影响.存在不平衡量的转子在旋转过程中受到周期激励,低转速时,转子作与激励同频率的周期运动,随着转速的提高,达到一定阈值时周期运动开始失稳.对迷宫密封的气动力采用Muszynska非线性力学模型,用打靶法求解转子运动周期解,并根据Floquet理论分析了周期解的稳定性及失稳后的动力学特性.     

结构动力学方程数值积分的三参数算法

本文提出计算结构动力响应的三参数单步数值积分法,它具有无条件稳定性质,并具有合适的算法阻尼.通过分析及与其他数值积分法比较,说明本文算法的精度有所提高.