Ionic liquid salt bridge based on tributyl(2-methoxyethyl)phosphonium bis(pentafluoroethanesulfonyl)amide for stable liquid junction potentials in highly diluted aqueous electrolyte solutions

A moderately hydrophobic ionic liquid, tributyl(2-methoxyethyl)phosphonium bis(pentafluoroethanesulfonyl)amide ([TBMOEP⁺][C₂C₂N⁻]), shows a very stable liquid junction potential upon contact with an aqueous solution whose ionic strength is as low as 1 μmol dm⁻³. The stability with the maximum excursion of the potential within ±0.5 mV for 30 min is very promising for accurate determination of pH and other single ion activities potentiometrically.     

Approach to thermal properties and electronic polarizability from average single bond strength in ZnOBi2O3B2O3 glasses

The glass transition temperature (T_g), density, refractive index, Raman scattering spectra, and X-ray photoelectron spectra (XPS) for xZnO-yBi₂O₃-zB₂O₃ glasses (x=10-65, y=10-50, z=25-60 mol%) are measured to clarify the bonding and structure features of the glasses with large amounts of ZnO. The average electronic polarizability of oxide ions (α_O2−) and optical basicity (Λ) of the glasses estimated using Lorentz-Lorenz equation increase with increasing ZnO or Bi₂O₃ content, giving the values of α_O2−=1.963 Å³ and Λ=0.819 for 60ZnO-10Bi₂O₃-30B₂O₃ glass. The formation of BOBi and BOZn bridging bonds in the glass structure is suggested from Raman and XPS spectra. The average single bond strength (B_MO) proposed by Dimitrov and Komatsu is applied to the glasses and is calculated using single bond strengths of 150.6 kJ/mol for ZnO bonds in ZnO₄ groups, 102.5 kJ/mol for BiO bonds in BiO₆ groups, 498 kJ/mol for BO bonds in BO₃ groups, and 373 kJ/mol for BO bonds in BO₄ groups. Good correlations are observed between T_g and B_MO, Λ and B_MO, and T_g and Λ, proposing that the average single bond strength is a good parameter for understanding thermal and optical properties of ZnOBi₂O₃B₂O₃ glasses.     

Correlation between C and O chemical shifts and torsional strain in spiroacetals

The relationship between the ¹³C and ¹⁷O NMR chemical shifts and the dihedral energies (non-bonding interactions) of 1,4-dioxaspiro[4.4]nonane, 1,4-dioxa- and 6,10-dioxaspiro[4.5]decane, 1,4-dioxa- and 6,11-dioxaspiro[4.6]undecane, 1,5-dioxaspiro[5.5]undecane, 1,5-dioxa and 7,12-dioxaspiro[5.6]dodecane and 1,6-dioxaspiro[6.6]tridecane were analyzed. These data showed correlation of the non-bonding interactions with the chemical shift of the spiranic carbon, as well as a linear relationship between ¹³C and ¹⁷O.     

Chemometric analysis of disubstituent effects on the 13C chemical shifts of the carboxyl carbons (deltaCO) of benzoic acids. A comparative study of the substituent effects on the strength of benzoic acids in apolar aprotic media

The results of measurements of substituent induced chemical shifts of carboxyl carbons (deltaCO) of dichloro- and difluorobenzoic acids, including the monosubstituted ones with substituents at meta- and/or ortho- positions, in chloroform-d and strengths of these acids (log K) in chlorobenzene show an anomalous reverse trend between deltaCO and log K, while the electron density at carboxyl carbons should influence similarly both deltaCO and log K. A detailed chemometric analysis of comparison of disubstituent effects between deltaCO and log K on the basis of Fujita-Nishioka's multiparameter approach and assumption of additivity of substituent effects shows a dominance of the localized pi-polarization mechanism relative to simple electrostatic effects upon deltaCO. Further, steric factors play a significant role in determining deltaCO whereas with respect to log K they were insignificant. The overall anomaly has been rationalized keeping in mind that, while log K is a gross measure of energy differences between the ionized and unionized forms of the acids, deltaCO is a very sensitive probe for determining changes in electron density at the carboxyl carbon of the unionized acid.     

聚乙烯醇硫酸钾水凝胶电机械化学行为研究

通过将交联聚乙烯醇硫酸酯化的方法制备了一种新型电刺激响应性聚乙烯醇硫酸钾(PVSK)智能水凝胶,并探讨了溶液离子强度和pH对PVSK水凝胶的溶胀吸水率、机械性能以及电机械化学行为的影响.结果表明,制备的PVSK水凝胶的平衡溶胀比随NaCl溶液离子强度的增大而减小,在pH2.39～10.83范围内基本不受溶液pH的影响;经不同离子强度和pH的NaCl溶液充分溶胀的PVSK水凝胶具有良好的机械性能,在非接触的直流电场作用下,该水凝胶向电场负极弯曲,凝胶的弯曲速度和弯曲偏转量随外加电场强度的增加而增大,随NaCl溶液离子强度的增大出现临界最大值,但不随溶液pH(2.08～10.53)的改变而改变;在循环电场作用下,PVSK水凝胶的电机械化学行为具有良好的可逆性.     

Cation identity dependence of crown ether photonic crystal Pb<Superscript>2+</Superscript> sensing

We quantitatively modeled the volume phase transition of a hydrogel containing a crystalline colloidal array with a crown ether ligand which binds Pb²⁺. The hydrogel volume response and the wavelength diffracted depend on the Pb²⁺ concentration and on both the ionic strength and the valence of the nonbinding ionic species. We successfully modeled the response of this hydrogel Pb²⁺ sensor to ionic strength and the cation valence of the added salts. Figure Cation identity dependence of crown ether photonic crystal Pb⁺ sensing     

Monitoring the traceability of the pH of a primary tetraborate buffer: comparison of results from primary and secondary apparatus

This paper reports evaluation of the behaviour of different combined glass electrodes applied to measurement of the pH of a primary, 0.01 mol kg⁻¹, tetraborate buffer. Measurements were first performed by use of a primary Harned cell (at 15, 25, and 37 °C); these results were then compared with those obtained for the same solution by use of three combined glass electrodes (25 °C) with different membranes and liquid-junction designs, calibrated by use of commercial pH-metric buffers. The pH of the same solution was also measured in terms of the molal concentration of hydrogen ions, using acid–base titration to evaluate the formal potential difference K of each cell at fixed ionic strength, I, adjusted by addition of KCl or Et₄NI (tetraethylammonium iodide). The reference value from primary measurement, paH = 9.171, was slightly closer to the mean value obtained by determination of concentration, rather than that obtained by direct measurement of activity; the differences were smaller than the extended uncertainty characteristics of the secondary measurements. The importance of evaluation of the ionic strength of the solution under study is emphasised. We verified that for tetraborate buffer slight modification of the value of I used to calculate γ _i (the activity coefficient of a single ion) in the calculation of paH from the acidity function at zero molality of chloride can significantly affect the reference value of the calibrator tool. This is true, in general, for low values of the ionic strength, such as those considered in this work; an approximate value of I can then cause distortions along the pH traceability chain. Application of the concepts of thermodynamics to this traceability chain is discussed.     

Degree of hydration in cement paste and C<Subscript>3</Subscript>A-sodium carbonate-water systems

This research provides a fundamental understanding of the early stage hydration of Portland cement paste, tricalcium aluminate (C₃A) paste at water to cement ratio of 0.5 and C₃A suspension at water to cement ratio of 5.0 modified by 2 or 4 mass% of sodium carbonate. A high conversion of unreacted clinker minerals to gel-like hydration products in the cement-Na₂CO₃ pastes takes place rapidly between 1^st to 24^th h. Contrary the Ca(OH)₂ formation within the same time interval is retarded in the excess of CO₃²⁻ ions due to intensive rise and growth of CaCO₃ crystals in hydrated cement. Later, the conversion of clinker minerals to the hydrate phase is reduced and higher contents of calcite and vaterite relative to that of Ca(OH)₂ in comparison with those found in the Portland cement paste are observed. As a consequence a decrease in strength and an increase in porosity between hardened Portland cement paste without sodium carbonate and those modified by Na₂CO₃ are observed. C₃A hydrates very quickly with sodium carbonate between 1^st and 24^th h forming hydration products rich in bound water and characterized also by complex salts of (x)C₃A·(y)CO₂·(zH₂O type, whereas C₃A-H₂O system offers C₃AH₆ as the main hydration product. Higher content of the formed calcium aluminate hydrates in C₃A-Na₂CO₃-H₂O system also contributes to early strength increase of Portland cement paste.     

Relationships among Preparative Technique,Phase Composition and Bending Strength of Bauxite Porcelain

1 INTRODUCTION Bauxite porcelain is a novel “K2O–Al2O3–SiO2” system ceramic by using sintered bauxite, clay and potash feldspar and albite as the main raw materials with the Al2O3’s content of 50%～60(massfraction). Compared to the traditional“K2O–Al2O3–SiO2” feldspar porcelain by using quartz, bolus alb and potash feldspar and albite as the main raw materials, the bauxite porcelain possesses such advantages as high mechanical strength, excellent electrical insula- tion prop…     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.