等离子体湍流能量传输的尺度相关性

对于空间环境中近乎无碰撞的等离子体,可采用Vlasov方程进行理论描述,基于Vlasov方程,讨论了等离子体湍流能量传输和耗散的过程:由亚格子应力引起的尺度间的能量传输,电场做功,压强张量做功(压强张量与速度梯度张量的相互作用).通过混合Vlasov-Maxwell(HVM)数值模拟,进一步研究了能量传输通道之间的联系...     

A Fault Detection Method for Electrohydraulic Switch Machine Based on Oil-Pressure-Signal-Sectionalized Feature Extraction

A turnout switch machine is key equipment in a railway, and its fault condition has an enormous impact on the safety of train operation. Electrohydraulic switch machines are increasingly used in high-speed railways, and how to extract effective fault features from their working condition monitoring signal is a difficult problem. This paper focuses on the sectionalized feature extraction method of the oil pressure signal of the electrohydraulic switch machine and realizes the fault detection of the switch machine based on this method. First, the oil pressure signal is divided into three stages according to the working principle and action process of the switch machine, and multiple features of each stage are extracted. Then the max-relevance and min-redundancy (mRMR) algorithm is applied to select the effective features. Finally, the mini batch k-means method is used to achieve unsupervised fault diagnosis. Through experimental verification, this method can not only derive the best sectionalization mode and feature types of the oil pressure signal, but also achieve the fault diagnosis and the prediction of the status of the electrohydraulic switch machine.     

三维跨音速叶栅自动气动优化设计

应用三维叶栅自动设计参数化方法,选择E3约束的条件下进行了自动气动优化设计.优化后,最优叶栅的总压恢复系数比参考叶栅提高了0.8%,流量和出口气流角都在约束范围内.对优化结果的详细气动分析表明,叶栅性能有显著的改善,表明该算法具有良好的优化性能.     

超临界水在倾斜光管中的传热不均匀特性研究

对超(超)临界压力下水在倾斜光管内的传热特性进行了比较系统的实验研究.实验段管径为φ32×3mm,倾角α=20°;试验压力P=23~34MPa,内壁热负荷q=300~500kW/m2,管内质量流速G=300~2000kg/m2s.得到了不同工况下倾斜光管内壁温和管内换热系数的周向分布及其变化规律,考察了压力、质量流速及热负荷对倾斜光管内壁温度的周向分布的影响,重点分析了管内上下母线处内壁温度差随工质焓值变化的特性及机理,讨论了大比热区水的物性变化对倾斜光管内传热不均匀性的影响,并与亚临界压力下的对应实验结果进行了比较.     

一例含阴离子水簇的钴配合物的合成、结构及理论研究

金属配合物中的水簇研究为研究宏观意义上的水以及与蛋白质分子有关的水分子提供了有效途径。本文合成了一个含有阴离子水簇的带状超分子配合物[Co(2,2-bipy)₂(N₃)₂](N₃)_0.5Cl_0.5·2H₂O(1,2, 2-bipy=2, 2-联吡啶)。单晶结构解析表明,配合物属于三斜晶系,P-1空间群,晶胞参数为:a=0.822 54(7) nm,b=1.175 58(9) nm,c=1.237 06(10) nm,α=91.379 0(10)°,β=92.151 0(10)°,γ=108.119 0(10)°,V=1.135 27(16) nm³,由一个单核[Co(2,2-bipy)₂(N₃)₂]⁺配合物阳离子、两个非配位水分子、0.5个游离的叠氮离子和0.5个氯离子组成,叠氮离子和氯离子位置无序,占有率各为50%。两个客体水分子通过强烈的分子间氢键作用形成了环状水四聚体,且与无序的N^-₃和Cl^-通过氢键作用形成了一个[(H₂O)₄(N₃)Cl]^2- 阴离子水簇。此外,本文基于密度泛函理论(DFT)对配合物[Co(2,2-bipy)₂(N₃)₂]⁺阳离子进行了量子化学计算,分析了其单点能和原子电荷,并计算了中心金属离子的氧化态,计算结果与实验相吻合。     

工作气压对磁控溅射ITO薄膜性能的影响

工作气压在ITO薄膜的制备过程中是一个重要的工艺参数,直接决定着薄膜的性能.本文利用射频磁控溅射方法,采用氧化铟锡陶瓷靶材,在衬底温度为175℃,工作气压范围为0.45～1.0 Pa条件下,制备了氧化铟锡透明导电薄膜.研究了工作气压对其微观结构、表面形貌和光电特性的影响.在衬底温度为175℃、纯氩气中制备的氧化铟锡薄膜电阻率为3.04 ×10-4 Ω·cm、可见光波段(400～800 nm)透过率为91.9;,适合用作异质结太阳电池的前电极和减反射膜.     

坝前淤泥土与新填坝体接触面抗剪强度试验研究及工程应用

坝前淤泥面与新填筑坝体接触面是"坝前淤泥面加坝"技术的薄弱环节.为了探究不同工况下淤泥坝基、新填筑坝体,以及淤泥土-新填土接触面的剪切强度特性,以宁夏南部山区西吉县南川水库坝前淤泥面加坝工程为研究对象,通过常规应变式直剪仪、改进常规应变式直剪仪分别进行剪切试验,分析了淤泥土含水率和压实度变化时,淤泥土、新填土、淤泥土-...     

Optimized Selection of Water Resource Allocation Schemes Based on Improved Connection Entropy in Beijing’s Southern Plain

Increased urbanization has caused problems such as increasing water consumption and the continuous deterioration of the groundwater environment. It is necessary to consider the groundwater quality in the water resource optimization system and increase the rate of reclaimed water development to reduce the amount of groundwater exploitation and achieve sustainable development of water resources. This study used the Daxing District, a region of Beijing’s southern plain, as an example to evaluate water quality by analyzing water quality data of surface and groundwater from 2012 to 2016 and actual water-use schemes from 2006 to 2016. Three groundwater extraction modes were set up based on NO₃–N concentrations, water resources were optimized under three extraction modes, and water resource optimization schemes were determined based on the improved connection entropy. The results show that (1) the surface water quality was poor, and the proportion of V₄ type water in the indexes of NH₃–N and chemical oxygen demand (COD) was the largest. The surface water can only be used for agricultural irrigation. The pollution sources contributing most to NH₃–N and COD were domestic and agricultural pollution sources. (2) The groundwater quality was good. The NO₃–N index was primarily type I–III water, accounting for 95.20% of the total samples. Severe NH₃–N pollution areas were mainly in the northern region, and most regional groundwater can be used for various purposes. (3) Taking 2016 as an example, three groundwater exploitation modes were set to optimize water resource allocation, and the results showed that the rate of groundwater development and NO₃–N pollution decreased significantly after optimization. (4) Connection entropy is an evaluation method that combines connection numbers and entropy, including identify, difference, and opposition entropy. As connection entropy being a kind of complete entropy, which can reflect the difference of the system in different states, based on the improved connection entropy, the connection entropies of optimal water resource allocation and actual water-use schemes were calculated. The connection entropy of groundwater exploitation mode 3 was less than that of groundwater exploitation modes 1 and 2 and actual water-use schemes from 2006 to 2016. Therefore, exploitation mode 3’s water resource optimization scheme was recommended. In the paper, satisfactory results have been obtained. As a kind of complete entropy, connection entropy has great research value in dealing with complex hydrological problems. This study’s research methods and outcomes can provide methodological and theoretical lessons for water management in freshwater-deficient areas.     

Water Status and Predictive Models of Moisture Content during Drying of Soybean Dregs Based on LF-NMR

To explore the drying characteristics of soybean dregs and a nondestructive moisture content test method, in this study, soybean dregs were dried with hot air (80 °C), the moisture content was measured using the drying method, water status was analyzed using low-field nuclear magnetic resonance (LF-NMR) and the moisture content prediction models were built and validated. The results revealed that the moisture contents of the soybean dregs were 0.57 and 0.01 g/g(w.b.), respectively, after drying for 5 and 7 h. The effective moisture diffusivity increased with the decrease in moisture content; it ranged from 5.27 × 10⁻⁹ to 6.96 × 10⁻⁸ m²·s⁻¹. Soybean dregs contained bound water (T₂₁), immobilized water (T₂₂) and free water (T₂₃ and T₂₃’). With the proceeding of drying, all of the relaxation peaks shifted left until a new peak (T₂₃’) appeared; then, the structure of soybean dregs changed, and the relaxation peaks reformed, and the peak shifted left again. The peak area may predict the moisture content of soybean dregs, and the gray values of images predict the moisture contents mainly composed of free water or immobilized water. The results may provide a reference for drying of soybean dregs and a new moisture detection method.     

Biological Risk Assessment of Three Dental Composite Materials following Gas Plasma Exposure

Gas plasma is an approved technology that generates a plethora of reactive oxygen species, which are actively applied for chronic wound healing. Its particular antimicrobial action has spurred interest in other medical fields, such as periodontitis in dentistry. Recent work has indicated the possibility of performing gas plasma-mediated biofilm removal on teeth. Teeth frequently contain restoration materials for filling cavities, e.g., resin-based composites. However, it is unknown if such materials are altered upon gas plasma exposure. To this end, we generated a new in-house workflow for three commonly used resin-based composites following gas plasma treatment and incubated the material with human HaCaT keratinocytes in vitro. Cytotoxicity was investigated by metabolic activity analysis, flow cytometry, and quantitative high-content fluorescence imaging. The inflammatory consequences were assessed using quantitative analysis of 13 different chemokines and cytokines in the culture supernatants. Hydrogen peroxide served as the control condition. A modest but significant cytotoxic effect was observed in the metabolic activity and viability after plasma treatment for all three composites. This was only partially treatment time-dependent and the composites alone affected the cells to some extent, as evident by differential secretion profiles of VEGF, for example. Gas plasma composite modification markedly elevated the secretion of IL6, IL8, IL18, and CCL2, with the latter showing the highest correlation with treatment time (Pearson’s r > 0.95). Cell culture media incubated with gas plasma-treated composite chips and added to cells thereafter could not replicate the effects, pointing to the potential that surface modifications elicited the findings. In conclusion, our data suggest that gas plasma treatment modifies composite material surfaces to a certain extent, leading to measurable but overall modest biological effects.