Identification of micro-scale calorimetric devices II

The miniaturized calorimetric devices furnish a reduced working flat surface and permits measurements with extremely low-mass quantities. The experimental sensitivity shows relevant position dependence with x-y surface coordinates and with z-distance. The device identification is realized via a 2-D model based in Fourier general equation. Using the Marquardt method the experimental flat surface device can be identified and the fitted parameters used to simulate the behavior of the experimental system. From the model, the effects of several dissipation configurations can be evaluated. Also, via the RC-analogy, a way to 3-D experimental devices is roughly described. This revised version was published online in July 2006 with corrections to the Cover Date.     

Time-marching numerical schemes for the electric field integral equation on a straight thin wire

We derive and analyse four algorithms for computing the current induced on a thin straight wire by a transient electric field. They all involve solving the thin wire electric field integral equations (EFIEs) and consist of a very accurate differential equations solver together with various schemes to approximate the vector potential integral equation. We carry out a rigorous numerical stability analysis of each of these methods. This has not previously been done for solution schemes for the thin wire EFIEs. Each scheme is shown to be stable and convergent provided the radius of the wire is small enough for the thin wire equations to be a valid model.     

强激光场下的双光子自电离理论

本文研究了包括二阶离化过程的强激光场下的双光子自电离。导出了光电子谱的解析表达式,并对一些特殊情况下的光电子谱进行了分析。     

Implementation of some higher-order convection schemes on non-uniform grids

A generalized formulation is applied to implement the quadratic upstream interpolation (QUICK) scheme, the second-order upwind (SOU) scheme and the second-order hybrid scheme (SHYBRID) on non-uniform grids. The implementation method is simple. The accuracy and efficiency of these higher-order schemes on non-uniform grids are assessed. Three well-known bench mark convection-diffusion problems and a fluid flow problem are revisited using non-uniform grids. These are: (1) transport of a scalar tracer by a uniform velocity field; (2) heat transport in a recirculating flow; (3) two-dimensional non-linear Burgers equations; and (4) a two-dimensional incompressible Navier-Stokes flow which is similar to the classical lid-driven cavity flow. The known exact solutions of the last three problems make it possible to thoroughly evaluate accuracies of various uniform and non-uniform grids. Higher accuracy is obtained for fewer grid points on non-uniform grids. The order of accuracy of the examined schemes is maintained for some tested problems if the distribution of non-uniform grid points is properly chosen.     

On the convergence rate and optimization of a numerical method with splitting of boundary conditions for the stokes system in a spherical layer in the axisymmetric case: Modification for thick layers

The convergence rate of a fast-converging second-order accurate iterative method with splitting of boundary conditions constructed by the authors for solving an axisymmetric Dirichlet boundary value problem for the Stokes system in a spherical gap is studied numerically. For R/r exceeding about 30, where r and R are the radii of the inner and outer boundary spheres, it is established that the convergence rate of the method is lower (and considerably lower for large R/r) than the convergence rate of its differential version. For this reason, a really simpler, more slowly converging modification of the original method is constructed on the differential level and a finite-element implementation of this modification is built. Numerical experiments have revealed that this modification has the same convergence rate as its differential counterpart for R/r of up to 5 × 10³. When the multigrid method is used to solve the split and auxiliary boundary value problems arising at iterations, the modification is more efficient than the original method starting from R/r ～ 30 and is considerably more efficient for large values of R/r. It is also established that the convergence rates of both methods depend little on the stretching coefficient η of circularly rectangular mesh cells in a range of η that is well sufficient for effective use of the multigrid method for arbitrary values of R/r smaller than ～ 5 × 10³.     

一类二阶两点边值问题的单调迭代方法

通过改进经典的单调迭代方法对于一类二阶两点边值的问题的正解建立了单调迭代程序。这些迭代程序都是从常值函数开始的，因而是可行并且有效的。     

Banach空间二阶非线性脉冲微分-积分方程的极值解

通过建立一个新的比较定理研究了B anach空间二阶非线性混合型脉冲微分-积分方程初值问题的极值解,所得结果推广和改进了现有文献的主要结果.     

超大规模集成电路光学光刻技术的现状与展望

光学光刻是目前超大规模集成电路(VLSI)制备中主要的微米和亚微米的图形加工技术,这一技术将继续保持其主导地位成为90年代VLSI发展的关键。本文综述了近年来光学光刻工艺的发展,主要介绍了G线(436nm)、Ⅰ线(365nm)和准分子激光光刻的现状,并对实现高的光学光刻分辨率所必须解决的透镜设计、套准精度和像场面积等问题作了详细描述。最后展望了发展方向、     

HIGH ACCURACY FINITE VOLUME ELEMENT METHOD FOR TWO-POINT BOUNDARY VALUE PROBLEM OF SECOND ORDER ORDINARY DIFFERENTIAL EQUATIONS

1　ＩｎｔｒｏｄｕｃｔｉｏｎＦｉｎｉｔｅｖｏｌｕｍｅｅｌｅｍｅｎｔｍｅｔｈｏｄｏｒＦＶＥＭｕｓｅｓａｖｏｌｕｍｅｉｎｔｅｇｒａｌｆｏｒｍｕｌａｔｉｏｎｏｆｔｈｅｄｉｆ ｆｅｒｅｎｔｉａｌｅｑｕａｔｉｏｎｗｉｔｈａｆｉｎｉｔｅｐａｒｔｉｔｉｏｎｉｎｇｓｅｔｏｆｖｏｌｕｍｅｔｏｄｉｓｃｒｅｔｉｚｅｔｈｅｅｑｕａｔｉｏｎ ,ｔｈｅｎｒｅ ｓｔｒｉｃｔｓｔｈｅａｄｍｉｓｓｉｂｌｅｆｕｎｃｔｉｏｎｓｔｏａｌｉｎｅａｒｆｉｎｉｔｅｅｌｅｍｅｎｔｓｐａｃｅｔｏｄｉｓｃｒｅｔｉｚｅｔｈｅｓｏｌｕｔｉｏｎ ([1 -4 ] ) .…