CURING KINETICS AND PROPERTIES OF ACRYLIC RESIN CURED WITH AZIRIDINE CROSSLINKER

A kind of aziridine crosslinkers was synthesized and used to crosslink acrylate copolymers. The crosslinkingproperties and curing kinetics of the resin were studied. It was found that with the increase of the content of crosslinker in theemulsion, the mechanical properties and solvent resistance of the resin will be apparently improved, but its glass transitiontemperature (T_g) is very low. The lowest amount of crosslinker used in the acrylic resin emulsion is 0.25%. Curing kineticsstudied by DSC show that this curing reaction occurs readily because the apparent activation energy of the reaction is low(65.1 kJ/mol). These results demonstrate that the aziridine crosslinker is indeed a low temperature crosslinking agent and canbe used at room temperature.     

超高感彩卷乳剂微晶体电镜研究

应用物理和化学相结合的方法，将超高感彩卷分层剥离，离心沉降，水洗除胶，电镜观测各层乳剂的微晶体结构。揭示了超高感彩卷各乳剂层的结构情况，披露了超高感彩剂制造技术。     

四苯基卟啉铜分子的扫描隧道显微镜成像

本文首次以ＬＢ技术将四苯基卟啉铜（ＣｕＴＰＰ）分子沉积到高定向热解石墨上，并用ＳＴＭ研究其表面形貌，得到了原子级分辨的ＣｕＴＰＰ分子的表面形貌图，结果表明，ＣｕＴＰＰ分子具有近似圆状平面结构，分子直径为１．０ｎｍ，与理论结果十分吻合，结合ＳＴＭ原理，讨论了有机大分子ＳＴＭ成像的条件。     

电子显微技术应用于生物纳米材料表征与测试的研究进展

该文简述了电子显微技术的发展历程,并介绍了现代电子显微镜的新功能。针对生物纳米材料理化性能与功能应用的特殊性,结合研究实例,重点阐述运用电子显微结构表征与原位分析测试技术指导构建新颖纳米结构、揭示材料与细胞/组织相互作用并发挥功能的机制。并在此基础上,展望了电子显微技术在生物纳米材料研究领域的发展方向(大尺寸图像拼接、三维重构、动态原位实时成像)。     

DSC study of cold and heat denaturation processes of β-lactoglobulin A with guanidine hydrochloride

The cold and heat denaturations of bovine P-lactoglobulin A ((β-lg A) has been studied in solutions of guanidine hydrochloride (GuHCI) by differential scanning calorimetry (DSC). The experimental results are presented and discussed. It is shown that the number of protons bound by the monomeric molecules of β-lg A was unchanged before and after its heat denaturation below pH 3, and that the activation energy of the heat denaturation was depressed owing to the presence of GuHCI. In the solutions with 2.50 and 3.06 mol/L of GuHCI, both the cold and heat denaturations of P-lg A were observed. In comparison with the heat denaturation, the activation energy of cold denaturation was far lower and the number of GuHCl molecules bound by the unfolded polypeptide chains after culd denaturation increased a lot. The absolute value of the enthalpy of cold denaturation was larger than that of heat denaturation. It was found by the analysis that the contribution to the total denaturational enthalpy of conformational change itself of the monomeric molecules of β-lg A was the lowest among the globulins, according to the average of the number of heavy atoms. Project supported by the National Natural Science Foundation of China, and by the fund for excellent items under Director of the Institute of Chemistry.     

Chemical Liquid Phase Deposition of Thin Aluminum Oxide Films

Introduction Inorganic oxide films have attracted a lot of interest in the last several decades. Among them, silicon dioxide films are widely used in modern microelectronics, optics and mechanics. This material has been grown by various methods including thermal oxidation, chemical vapor phase deposition, plasma-enhanced chemical vapor phase deposition, and so on.1,2 Recently, Nagayama et al.3 have reported that SiO2 thin films could be produced by a new chemical method of liquid phase depos…     

Differential scanning calorimetry as an analytical tool in the study of drug-cyclodextrin interactions

The interactions of trimethoprim, sulphadiazine and sulphamethoxazole with natural (a- b-, g- ) and amorphous (RAMEB) or crystalline (DIMEB) methylated b-cyclodextrins were investigated both in aqueous solution (using phase-solubility analysis) and in the solid state (using DSC supported by X-ray analysis). In particular, DSC studies enabled determination of the relative degree of crystallinity of each drug in its physical and ground mixtures with the different cyclodextrins on the basis of the variation of its heat of fusion in comparison with that of the pure drug. In all cases, the host cavity size was a prevalent factor for the inclusion complexation in liquid state. On the contrary, it had a negligible effect on solid-state interactions in terms of drug amorphization. DIMEB and RAMEB exhibited similar performances in aqueous solution, showing that the presence of methyl-groups improved the complexing and solubilizing properties of b-cyclodextrin. However, DSC studies revealed that RAMEB was clearly more active in performing solid-state interactions, i.e. drug amorphization, and as stabilizing agent for the amorphous state brought forth. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determining the wax content of crude oils by using differential scanning calorimetry

By the use of differential scanning calorimetry (DSC), a new method to measure the wax content of crude oil has been developed. In this paper, the wax content of a crude oil is proposed and proved to be the Q (total thermal effect of wax precipitation in sample) ratio of the crude oil and its corresponding wax obtained by using standard acetone method, i.e. Q_oil/Q_wax. For the 14 studied crude oils with the wax content ranging from 1 to 27 wt.%, the wax contents determined by the presented method are in good agreement with those determined by standard acetone method, with an absolute average deviation of only 0.82 wt.%. This method has an advantage over reported DSC methods in which the exact dissolution or precipitation enthalpy of wax is a must. It is also found that the wax contents determined by either of the two methods show good linear relationship with the total thermal effect Q_oil, with the correlation coefficients over 0.96. According to the empirical correlations, the wax content of a crude oil can be easily determined by using the DSC total thermal effect Q_oil. In addition and more significantly, the new method can be applied to improve the accuracy in determining the amount of precipitated wax in a waxy crude oil at different temperatures.     

Preparation and Characterization of N-4-Nitrophenyl-L-prolinol Nanocrystals in Sol-Gel Matrices

Organic nanocrystals of N-4-nitrophenyl-l-prolinol (NPP) have been grown in sol-gel matrices prepared from silicon alkoxide precursors. Our process is based on the control of the nucleation and growth kinetics of the dye in the pores of dense gels. Nanocomposites gel-glasses are obtained with a high optical quality due to the small size of the nanocrystals (10-20 nm). Differential scanning calorimetry experiments evidenced clearly the melting point of NPP nanocrystals, which is registered 51°C above that of NPP powder. Micro-Raman and solid state NMR spectroscopies allowed us to demonstrate that our nanocrystallization process does not chemically modify NPP molecules. We specified also the nature of interactions existing between the NPP nanocrystals and the xerogels. These strong interactions, which explain the important increase of the melting point of the nanocrystals in comparison to the NPP powder, are hydrogen bonds between nitro groups of NPP and uncondensed silanol functions of the silicate network.     

Study on the anodic reaction of Ni in an alkaline solution by transient pH detection based on scanning electrochemical microscopy (SECM)

The anodic reaction of Ni in an alkaline solution was studied by the tip–substrate voltammetry mode of scanning electrochemical microscopy (SECM) and cyclic voltammetry (CV). A platinum microdisc electrode was selected as the tip electrode, which functioned as a pH sensor with transient response capability. The pH value of the solution near the Ni electrode surface varied while the Ni substrate oxidation reaction occurred, and the pH variation could be detected by the tip faradic current. The cyclic voltammogram results showed that two types of hydroxides: i.e. α‐Ni(OH)₂ and β‐Ni(OH)₂ were formed during Ni oxidation in the lower potential region. In the proceedings of α‐Ni(OH)₂ → γ‐NiOOH and β‐Ni(OH)₂ → β‐NiOOH, the process of OH^? concentration decrease in the solution was ahead and behind of electron transfer in the solid phase, respectively. These results indicate that the OH^? adsorption process occurs as an elementary step in the former reaction and the H⁺ diffusion process from the inner to the outer layer of the solid phase occurs as a subsequent step in the latter reaction. The results also revealed that the oxide film on the Ni surface has a two‐layer structure. The real potential of the oxygen evolution reaction (OER) on the Ni surface with different cycles is also analyzed in the paper. Copyright © 2007 John Wiley & Sons, Ltd.