On the High Viscosity of Aqueous Solution of Lysozyme Induced by Some Organic Solvents

A remarkably high viscosity has been induced in protein aqueous solutions by the addition of certain structurally related organic solvents. The effect has been observed for lysozyme aqueous solutions containing tetramethylurea (TMU), dimethylsulfoxide (DMSO), dimethylformamide, and hexamethylphosphortriamide. The effect has also been induced in ferrocytochrome c aqueous solutions by TMU. Critical concentrations for both the protein and organic solvent were verified for the onset of the viscosity increase. A common feature of the solvents which were able to induce the effect is a dipolar moiety (C=O, S → O and P → O) and a nonpolar region represented by the methyl groups. The resulting fluids show an extremely restricted flow and a typical non-Newtonian, pseudoplastic behavior. Use was made of¹H nuclear magnetic resonance (NMR) and Raman spectroscopy to characterize protein structural modifications and of¹³C NMR to investigate changes in relaxation times and chemical shifts in the solvent/water solutions. A systematic rheological characterization of the systems was undertaken for some of the solvents, and unusual patterns of viscous effects were identified for the solvent/water systems both with and without protein. The process was found to be at least partially reversible, as concluded from the recovered original solution rheological characteristics and the original protein¹H NMR spectrum, after eliminating the organic solvent by ultrafiltration. The whole process was characterized as consisting of two mutually independent stages. The first involves an extensive conformational transition of the polypeptide backbone, from a predominantly α-helical to increased random coiled and β-sheet structures, with the occurrence of nonorthodox protein secondary structures at regions above the solvent critical point. The second stage consists of short-lived interchain contacts leading to an entanglement of the macromolecular system as a whole. A microphase reversion in the organic solvent/water mixture, supported by¹³C NMR and rheological results, is proposed as the driving force causing the observed behavior.     

Fluorescence study of the solubilization of benzo[a]pyrene: application to its detection in coal washing waters

The solubilization of benzo[a]pyrene by organic solvents (dioxane, toluene and dichloromethane) and a surfactant (Triton X-100) was investigated. These media were successfully used for the determination of benzo[a]pyrene using fluorescence detection, with excellent limits of detection and large linear analytical ranges. Benzo[a]pyrene was detected in coal washing waters using liquid chromatography with fluorescence detection. The stability of this compound in dioxane was also examined.     

Preparation and properties of composites made from rice straw and poly(vinyl chloride) (PVC)

Rice straw was employed for the preparation of lignocellulosic‐poly(vinyl chloride) (PVC) composites. The effect of pretreatment of rice straw, concentration of PVC, pressure as well as pressing temperature on the mechanical properties and water absorption was studied. Also, the effect of lignin as coupling agent on the mechanical properties and water absorption of composite was studied. Composites of rice straw comprising both PVC and a coupling agent offer superior properties compared to those made from only rice straw and PVC. The extent of improvement in the mechanical properties and dimensional stability of composites depended not only on the pretreatment of rice straw, concentration of PVC and lignin but also on pressure and pressing temperature. Copyright © 2004 John Wiley & Sons, Ltd.     

Methyl cellulose-based edible films and coatings I. Effect of plasticizer content on water and 1-octen-3-ol sorption and transport

Edible films were prepared from methyl cellulose with various concentrations of poly(ethylene glycol) 400 (PEG400) used as a plasticizer. Water vapour and 1-octen-3-ol (an aroma compound) were selected as hydrophilic and hydrophobic volatile penetrants respectively. Their solubility and permeability through methyl cellulose-based edible films were studied using gas chromatography methods. Whatever penetrant was used, the flux increased with the PEG400 content. Transfer behaviour, i.e., the order of increased magnitude of the transfer rate, strongly depends on the nature of the volatile compound. However, water sorption only depends on the PEG400 content whereas the aroma compound sorption is affected by both the water and the PEG400 concentrations. Relationships between solubility and permeability can be partially explained by the plasticization phenomenon.     

Determination of Low-Level Ethylenediaminetetraacetic Acid in Water Samples by Ion Chromatography with Ultraviolet Detection

A convenient and sensitive ion chromatographic (IC) method for the analysis of ethylenediaminetetraacetic acid (EDTA) in water samples was proposed. Using a fast reversible reaction of free EDTA and metal–EDTA complexes into Fe(III)–EDTA complex in the presence of Fe(III) ions, sample solutions were applied to an ion-exchange column using a mobile phase (pH 2.3), which was composed of 100 μM Fe(III) chloride and 5 mM methanesulfonic acid. The addition of Fe(III) solution (100 μL) containing 10 mM Fe(III) chloride and 0.5 M methanesulfonic acid to the sample solution (10 mL) permitted the injection of a large volume (400 μL) of sample, which allowed for greater sensitivity. The proposed IC method gave a highly linear (r ² > 0.999) calibration curve ranging 0.005–1.0 μM EDTA and had a limit of detection of 1.5 nM. High repeatability (RSD < 2.1%) and recoveries (88–108%) were also obtained. With this method, total EDTA level in raw and drinking waters were analyzed successfully.     

Ternary surface complexes by theE(%)-pH curve method

A new method for the study of ternary surface complexes at liquid-solid interface, theE(%) -pH curve method, was proposed. Four types ofE(%)-pH curves, namely, phenomenon of left-right shifts of S-shaped curve, V-shaped curve, monodirection shift curve and X-shaped curve, were discovered. Correspondingly, apart from type (I) ternary surface complex and type (II) ternary surface complex , a new type of ternary surface complex was discovered. Project supported by the National Natural Science Foundation of China and the Fund of Doctoral Degree’s Spot.     

Mass transfer to horizontal gas-generating electrodes

Mass transfer to a horizontal electrode during electrolytic evolution of oxygen and hydrogen at current densities of 100 to 10 000 A/m² is studied. The mass transfer intensity is evaluated from the diffusion layer thickness, which varies from 60 to 5 μm at such current densities. Calculations show that the decrease in the diffusion layer thickness is due to bubbles with a stationary interphase surface crossing the diffusion layer. During the hydrogen evolution, the diffusion layer thickness is nearly the same for vertical and horizontal electrodes. During the oxygen evolution, the diffusion layer is much thinner for a horizontal electrode. Additional decrease of the diffusion layer thickness during the evolution of oxygen is associated with the lesser solution density in the near-electrode layer and with its transport away by means of natural convection.     

Two-dimensional catena–polymer [[[bis (µ-aqua)(bis (µ-cpiap-K2O1:O2)sodium(I))] (µ-chlorido) bis(µ-cpiap-K5N1:O1:O2:O3,O3′)dicopper(II)]bis(µ-aqua)(aqua)bis(cpiap-K2O1,O2)copper(II)] hexa hydrate

The new title two-dimensional hetero-tetra nuclear Cu₃–Na coordination polymer {[NaCu₃Cl(cpiap)₂(H₂O)₃]_n·6nH₂O} (1) consists of crystallographically two-independent copper(II) centers, each bridged by a sodium cation through carboxylate-oxygen of the deprotonated H₃cpiap ligand (H₃cpiap = 2-(carboxyphenyl)iminoaceticpropanoic acid) to Cu^II (2) and Cu^II (2⁻) cations, and through water molecules to Cu^II (1) cation. Cu^II (2) and Cu^II (1) cations are bridged by carboxylate-oxygen atoms of the ligand in a syn-anti mode which, alternate regularly within the chain being bridged by a tetra coordinated sodium cation. Each Cu^II (2) and Cu^II (2⁻) cation in (1) is in an octahedral environment formed by four carboxylate-oxygens from two cpiap³⁻ ligands, one nitrogen atom and a bridging chloride atom. Cu^II (1) cation is in a square pyramidal environment formed by three water molecules and two carboxylate-oxygens from two cpiap³⁻ ligands. The ligand acts simultaneously as monodentate and tridentate toward Cu^II (1) and Cu^II (2) cations respectively. The lattice water molecules involved in OH···O hydrogen bonding are situated in the void spaces between layers. The zigzag chains, which run along the b-axes further construct three-dimensional metal-organic framework via hydrogen bonding and weak face-to-face π-π interactions. Weak CH···O interactions are also present.     

A novel method of the separation/preconcentration and determination of trace molybdenum(VI) in water samples using microcrystalline triphenylmethane loaded with salicyl fluorone

It is the first time that triphenylmethane was used as an adsorbent to preconcentrate and separate trace amount of molybdenum in water samples. The effects of different parameters, such as acidity, stirring time and various metal ions, the amounts of triphenylmethane and salicyl fluorine, etc. on the enrichment yield of molybdenum have been studied to optimize the experimental conditions. Under the optimum conditions, molybdenum can be adsorbed on the surface of microcrystalline triphenylmethane loaded with salicyl fluorone by the intermolecular action strength. The possible reaction mechanism for the enrichment of molybdenum was discussed in detail in this paper. Mo(VI) can be completely separated from Pb(II), Co(II), Cu(II), Cr(III), Ni(II), Hg(II), Zn(II), Cd(II), Fe(III) and Al(III) in the solution. The proposed method was successfully applied to the determination of trace amount of molybdenum in various water samples by spectrophotometry after preconcentration using microcrystalline triphenylmethane. The preconcentration factor is from 83 (500 ml water sample was enriched to 6.0 ml) to 166 (1000 ml water sample was enriched to 6.0 ml). The detection limit is 1.3 × 10⁻⁵ mg l⁻¹ and the linearity is maintained in the concentration range 3.8 × 10⁻³ to 0.36 mg l⁻¹ with a correlation coefficient of 0.9998. The recoveries are in the range of 93.5-104%. The relative standard deviation is 1.8-2.9%. Analytical results obtained with this novel method are very satisfactory.