低振幅中心对称光折变暗和灰空间孤子的时间特性

为了研究中心对称光折变晶体中低振幅暗和灰空间孤子的时间特性,推导出了含时间参量的空间电荷场和光波的动态演化方程.采用数值方法,得到了中心对称光折变晶体中低振幅空间暗和灰孤子强度包络和强度半峰全宽的时间演化特性.结果表明,初始阶段形成的宽度较宽的孤子,其宽度随时间单调递减到一个最小值直至稳态孤子的形成;在相同的演化时间内...     

介孔材料MCM-41的导热研究

文章根据二氧化硅介孔材料MCM-41纳米孔结构特点,首先建立和验证了纳米结构单元模型,然后使用平衡分子动力学方法模拟了孔壁热导率;接着耦合孔隙内气体导热,开展了一维传热分析,最终提炼出MCM-41的有效热导率表达式;并对壁厚、孔径和孔隙率对热导率的影响进行了分析.研究结果表明,MCM-41具有良好的绝热性能,其有效热导率随孔隙率增大近似呈线性减小,且表现出各向异性;导热性能沿孔道长度方向表现出准一维特性. 关键词： 有效热导率 介孔材料 MCM-41 平衡分子动力学     

结构参量对左手材料通带位置影响的研究

基于金属短板对和连续金属线(short-slab pair and continuous wires)复合结构,从理论上系统地研究了在THz波段结构参量对左手材料通带位置的影响.数值模拟结果表明,改变金属板宽度或厚度、连续金属线的长度或厚度都会引起左手材料通带位置向较高频段偏移. 关键词： 负折射 左手材料 结构参量 通带     

电子俘获材料的研究现状及在红外检测方面的应用

电子俘获材料在辐射剂量测定、光信息处理、光存储、红外光检测等许多技术领域具有广泛的应用。本文详细介绍了电子俘获材料的发光原理、材料种类、制备方法以及研究现状,并针对该材料在红外光检测方面的应用,提出了在室温下该材料存在红外光检测上限的观点。针对电子俘获材料存在性质不稳定及在制备过程中需用到硫化类材料易造成污染等问题,建议进一步改进材料制备方法。最后,文中指出玻璃陶瓷类电子俘获材料会有很好的发展前景,并对该种材料未来的发展前景进行了展望。     

Analysis of coir fiber acoustical characteristics

Coir fiber from coconut husk is an important agricultural waste in Malaysia. Acoustic absorption coefficient of the fiber as a porous material is studied in this paper. Two types of fiber are investigated, fresh from wet market and industrial prepared mixed with binder. Moreover two analytical models, namely; Delany–Bazley and Biot–Allard are used for analysis. Experimental measurements in impedance tube are conducted to validate the analytical outcomes. Results show that fresh coir fiber has an average absorption coefficient of 0.8 at f > 1360 Hz and 20 mm thickness. Increasing the thickness is improved the sound absorption in lower frequencies, having the same average at f > 578 Hz and 45 mm thickness. Delany–Bazley technique can be used for both types of fiber while Biot–Allard method is compensated for the industrial prepared fiber considering the binder additive. This form generally shows poor acoustical absorption in low frequencies. Inevitably, fiber has to be mixed with additives in commercial use to enhance its characteristics such as stiffness, unti-fungus and flammability. Hence other approaches such as adding air gap or perforated plate should be used to improve the acoustical properties of industrial treated coir fiber.     

Optimization of the locations of the loudspeaker and absorption material in a small room

The sound field both in the loudspeaker box and in the room is calculated by an analytical solution of three-dimensional wave equation. It is shown in theory that the amplitude response in small rooms is affected by the following positions: driver position on the front panel of the box, box position in the room, absorption material position in the box and absorption material position on the interior walls of the room. Both our computer prediction and experiments prove that the optimum positions are beneficial to the amplitude response.     

符合计数在钚的属性测量中的应用研究

中子符合计数在核材料认证和管理中有着广泛的应用．系统阐述了中子符合计数的基本原理,对“点模型”公式作了推导．利用MCNP4B程序实现了中子符合计数的数值模拟.Neutron coincidence counting is widely used in the authentication and management of nuclear material. The basic principles of coincidence counting and the derivation of "point model" formulae of "point model" are introduced in this paper. The numerical simulation of the coincidence counting is implemented by use of the MCNP4B package.     

Advanced muon radiography with compact accelerator system

By using a well-defined mono-energetic, pencil-like, high-energy and intense muon beam, one can realize, via simultaneous measurements of energy-loss and multiple-scattering, a quick and element-selective radiography to detect e.g. a few kg of U which is shielded in a thick Fe container or hidden within 2–3 m of low-Z material. A source of such an ideal beam of muons can be realized in transportable form via truck trailers, by combining a compact 400 MeV electron accelerator for photo π/μ production, a superconducting solenoid for full-solid-angle π/μ capture and transport, a stopping in hot tungsten metal for cooling of energetic μ⁺ to sub-eV μ⁺, and finally a compact linear accelerator for rapid acceleration to 600 MeV. Principle and some details are described.     

三维有序二氧化锰大孔材料的模板技术合成及表征

以单分散SiO2 胶态晶体球形成的三维有序结构为模板 ,利用胶体晶模板技术合成了三维长程有序的二氧化锰大孔材料 .通过X射线粉末衍射 (XRD)和扫描电子显微镜 (SEM)对产物进行了表征 .其中XRD数据显示所得产物为纯四方相二氧化锰 .SEM结果表明 ,所合成的二氧化锰大孔材料孔大小均匀 ,空间排列高度有序 ,很好地复制了SiO2 胶态晶体球的自组装方式 .此外 ,对三维有序二氧化锰大孔材料的合成过程进行了分析 ,研究了前体填充次数对产物孔结构的完整性和有序性的影响 ,还发现产物孔径的收缩存在异常现象 .     

X-ray damage characterization in BaLiF3,KMgF3 and LiCaAlF6 complex fluorides

Two-inch sized KMgF₃,BaLiF₃ and LiCaAlF₆ (LiCAF) single crystals were grown by the Czochralski method under a CF₄ atmosphere. X-ray irradiation was used to carry out a comparative study of induced optical absorption phenomena and colour centre creation in the ultra-violet and visible spectral regions. The integral of the induced absorption spectra is significantly lower in LiCAF with respect to the other studied materials. It is found that the amplitude of the F-absorption band is suppressed more than a factor of 3 by Mg-doping. For Mg-doped crystals, the optimum doping concentration is about 0.2 mol% of Mg²⁺.