Experimental investigation on the effects of the standoff distance and the initial radius on the dynamics of a single bubble near a rigid wall in an ultrasonic field

Bubble behaviors near a boundary in an ultrasonic field are the fundamental forms of acoustic cavitation and of substantial importance in various applications, such as industry cleaning, chemical engineering and food processing. The effects of two important factors that strongly affect the dynamics of a single acoustic cavitation bubble, namely, the initial bubble radius and the standoff distance, were investigated in this work. The temporal evolution of the bubble was recorded using high speed microphotography. Meanwhile, the time of bubble collapse and the characteristics of the liquid jets were analyzed. The results demonstrate that the intensity of the acoustic cavitation, which is characterized by the time of bubble collapse and the liquid jet speed, reaches the optimum level under suitable values of the initial bubble radius and the normalized standoff distance. As the initial bubble radius and the normalized standoff distance increase or decrease from the optimal values, the time of the bubble collapse increases, and the first liquid jet’s speed decreases substantially, whereas the speeds of the second and third liquid jets exhibit no substantial changes. These results on bubble dynamics in an ultrasonic field are important for identifying or correcting the mechanisms of acoustic cavitation and for facilitating its optimization and application.     

Comparison of two cold atmospheric pressure plasma jet configurations in argon

The present study compares the operation of two cold atmospheric plasma jet (CAPJ) configurations: needle-to-cylinder electrode configuration (CAPJ I) and single high-voltage cylinder electrode around the quartz tube (CAPJ II). The CAPJs were operated in argon flowing through a quartz capillary with 0.5-mm inner diameter into the ambient air, and the plasma was generated by sinusoidal kHz frequency AC power supplies. The main emphasis of the study was on the mechanism of the initiation of ionization waves for these two configurations. For both CAPJs, there appeared several ionization waves during one half-period of the applied voltage waveform, and the number of ionization waves increased at higher voltage amplitudes. However, we discovered marked differences in the initiation of the ionization waves for two different CAPJ configuration. The applied voltage controlled the initiation of consecutive ionization waves, which propagated from the grounded electrode towards the tube orifice in CAPJ I. In the case of CAPJ II, certain time had to pass for the initiation of a new ionization wave, and subsequent ionization waves within the same half-period started at the tube orifice. In addition to the differences in the initiation of the ionization waves, we observed that the CAPJ I was ignited and sustained at lower voltages, while CAPJ II produced a longer plasma jet. The observed advantages and deficiencies of investigated CAPJ configurations point out their potential in different applications.     

Detection of water in jet fuel using layer-by-layer thin film coated long period grating sensor

The quantitative measurement of jet fuel additives in the field is of interest to the Air Force. The “smart nozzle” project was designed as a state-of-the-art diagnostics package attached to a single-point refueling nozzle for assessing key fuel properties as the fuel is dispensed. The objective of the work was to show proof of concept that a layer-by-layer thin film and long period grating fibers could be used to detect the presence of water in jet fuel. The data for the nafion/PDMA film and a long period grating fiber is a combination capable of quantitative measurement of water in kerosene. The average response (spectral loss wavelength shift) to the kerosene sample ranged from −6.0 for 15 ppm to −126.5 for 60 ppm water. The average calculated value for the check standard was 21.71 and ranged from 21.25 to 22.00 with a true value of 22.5 ppm water. Potential interferences were observed and are judged to be insignificant in real samples.     

Hydrogen Bonding in the Dimer and Monohydrate of 2-Adamantanol: A Test Case for Dispersion-Corrected Density Functional Methods

Weakly-bound intermolecular clusters constitute reductionist physical models for non-covalent interactions. Here we report the observation of the monomer, the dimer and the monohydrate of 2-adamantanol, a secondary alcohol with a bulky ten-carbon aliphatic skeleton. The molecular species were generated in a supersonic jet expansion and characterized using broadband chirped-pulse microwave spectroscopy in the 2–8 GHz frequency region. Two different gauche-gauche O-H···O hydrogen-bonded isomers were observed for the dimer of 2-adamantanol, while a single isomer was observed for the monomer and the monohydrate. The experimental rotational parameters were compared with molecular orbital calculations using density functional theory (B3LYP-D3(BJ), B2PLYP-D3(BJ), CAM-B3LYP-D3(BJ), ωB97XD), additionally providing energetic and electron density characterization. The shallow potential energy surface makes the dimer an interesting case study to benchmark dispersion-corrected computational methods and conformational search procedures.     

垂直均匀射流下CPU散热器换热性能的数值分析

对垂直射流下CPU散热器的流场及温度场进行了数值模拟,得到了CPU散热器流场及温度场的分布规律,指出近底面肋片间存在回流区,明显影响传热。分析了CPU散热器在射流时不同情况下的散热性能,计算所得数据有助于CPU散热器的设计与改进。     

液态金属熔池中气泡-液体两相湍流的数值模拟研究

应用欧拉-欧拉双流体模型,以及分别描述气泡和液体湍流的两相湍流模型,描述液态金属中气体射流发泡过程的两相流动及气泡分布。与实验结果的对比表明,本模型的预测能力优于前人未考虑气相湍流的模型。考查了液体物性和气泡尺寸对流场特性的影响,结果发现,液体密度越低,气泡尺寸越小,气泡分布就越均匀。     

射流温度场与拟序结构间相互作用的大涡模拟

本文分别对常温空气和高温空气的平面自由射流进行了大涡模拟,采用分步投影法求解动量方程,亚格子项采用标准Ｓｍａｇｏｒｉｎｓｋｙ亚格子模式模拟,并同时求解了标志物输运方程以实现数值流场显示。模拟结果给出了湍流的瞬态发展过程以及流动中拟序结构的发展演变过程,通过对常温射流和高温射流瞬态流场的比较揭示了射流中温度场与拟序结构间相互作用的细节过程。     

环形光栅的菲涅耳衍射

在圆孔的菲涅耳衍射的基础上 ,讨论环形光栅的菲涅耳衍射 ,并给出了计算机仿真结果     

可压缩轴对称射流流场近区的数值模拟

采用高精度差分方法对二维轴对称可压缩射流流场进行了数值模拟,研究了大尺度涡结构的形成和发展过程及其在射流雪展过程中的作用,计算结果显示了射流失稳后首先出现Ｋｅｌｖｉｎ－Ｈｅｌｍｈｏｌｔｚ非稳定特征,之后向下游发展的过程中, 一笥效应的增长导致涡的配对和对并;指出射流场中压力波动的分布是大尺度涡结构分布的直接结果。     

Disjoint Paths in Decomposable Digraphs

The k‐linkage problem is as follows: given a digraph and a collection of k terminal pairs such that all these vertices are distinct; decide whether D has a collection of vertex disjoint paths such that is from to for . A digraph is k‐linked if it has a k‐linkage for every choice of 2k distinct vertices and every choice of k pairs as above. The k‐linkage problem is NP‐complete already for [11] and there exists no function such that every ‐strong digraph has a k‐linkage for every choice of 2k distinct vertices of D [17]. Recently, Chudnovsky et al. [9] gave a polynomial algorithm for the k‐linkage problem for any fixed k in (a generalization of) semicomplete multipartite digraphs. In this article, we use their result as well as the classical polynomial algorithm for the case of acyclic digraphs by Fortune et al. [11] to develop polynomial algorithms for the k‐linkage problem in locally semicomplete digraphs and several classes of decomposable digraphs, including quasi‐transitive digraphs and directed cographs. We also prove that the necessary condition of being ‐strong is also sufficient for round‐decomposable digraphs to be k‐linked, obtaining thus a best possible bound that improves a previous one of . Finally we settle a conjecture from [3] by proving that every 5‐strong locally semicomplete digraph is 2‐linked. This bound is also best possible (already for tournaments) [1].