对“四舍六入五留双”修约规则的商榷*

数值修约是分析化学教学的重要内容。目前,主流分析化学教材均采用 “四舍六入五留双”数值修约规则。详细剖析了该规则中尾数与进舍条件的关系,指出“四舍六入五留双”修约规则中应采用“尾数的首位”而不是“尾数”设置进舍条件,否则存在逻辑错误。对比分析表明,“四舍六入五留双”以数字4、5和6为比较值设置的修约规则等价于GBT8170—2008国家标准中以数字5为比较值设置的进舍规则,但GBT8170—2008国家标准的进舍规则的逻辑、表述等优于“四舍六入五留双”规则。因此,建议分析化学教材采用GBT8170—2008国家标准规定的数值修约相关内容。     

Hydrogen Bonding in the Dimer and Monohydrate of 2-Adamantanol: A Test Case for Dispersion-Corrected Density Functional Methods

Weakly-bound intermolecular clusters constitute reductionist physical models for non-covalent interactions. Here we report the observation of the monomer, the dimer and the monohydrate of 2-adamantanol, a secondary alcohol with a bulky ten-carbon aliphatic skeleton. The molecular species were generated in a supersonic jet expansion and characterized using broadband chirped-pulse microwave spectroscopy in the 2–8 GHz frequency region. Two different gauche-gauche O-H···O hydrogen-bonded isomers were observed for the dimer of 2-adamantanol, while a single isomer was observed for the monomer and the monohydrate. The experimental rotational parameters were compared with molecular orbital calculations using density functional theory (B3LYP-D3(BJ), B2PLYP-D3(BJ), CAM-B3LYP-D3(BJ), ωB97XD), additionally providing energetic and electron density characterization. The shallow potential energy surface makes the dimer an interesting case study to benchmark dispersion-corrected computational methods and conformational search procedures.     

Laser Spectroscopy and Lifetime Measurements of the S1 State of Tetracyanoquinodimethane (TCNQ) in a Cold Gas-Phase Free-Jet

The S₁ electronic state of 7,7,8,8-Tetracyanoquinodimethane (TCNQ) has been investigated by laser induced fluorescence (LIF), dispersed fluorescence (DF) spectroscopy, and lifetime measurements under jet-cooled conditions in the gas-phase. The LIF spectrum showed a weak origin band at 412.13 nm (24262 cm⁻¹) with prominent progression and combination bands involving vibrations of 327, 1098, and 2430 cm⁻¹. In addition, very strong bands appeared at ∼363.6 nm (3300 cm⁻¹ above the origin). Both the LIF and DF spectra indicate considerable geometric change in the S₁ state. The fluorescence lifetime of S₁ at zero-point level was obtained to be 220 ns. This lifetime is 40 times longer than the radiative lifetime estimated from the S₁−S₀ oscillator strength. Furthermore, the lifetimes of the vibronic bands exhibited drastic energy dependence, indicating a strong mixing with the triplet (T₁) or intramolecular charge-transfer (CT) state. This study is thought to disclose intrinsic nature of TCNQ, which has been well known as a component of organic semiconductors and a versatile p-type dopant.     

Supersonic jet spectroscopy of naphthalene–fluorene bichromophoric cluster

We have investigated the supersonic jet spectroscopy and photophysics of 1-methylnaphthalene–fluorene (1MN–FL) cluster, and looked for indications of intramolecular electronic energy transfer (Intra-EET) from the FL (donor, D) to 1MN (acceptor, A). The clusters were identified by their time of flight (TOF) mass spectra. We observed clusters bands in the LIF spectrum near the region of 1MN origin. We have also observed cluster TOF–resonance enhanced multi-photon ionization (REMPI) spectrum near the electronic origin of the fluorene moiety. However, this spectrum was almost independent of the excitation wavelength, and was not observed in the LIF spectrum. This is probably due to fast Intra-EET resulting in lifetime broadening of the donor chromophore cluster spectrum, similar to that observed previously for the naphthalene–anthracene bichromophoric system.     

Trace level analysis of volatile and semi-volatile organic compounds in water using a membrane/jet separator interfaced to an ion trap mass spectrometer

An ion trap mass spectrometer, equipped with a membrane/jet separator interface, is used for the direct detection of volatile and semi-volatile organic compounds in aqueous solutions. Aqueous sample is passed through a capillary membrane, the outside surface of which is continuously purged by helium. The permeate is pneumatically transported to the mass spectrometer via a jet separator which acts as an additional enrichment device. The performance and response characteristics of non-porous silicone and microporous polytetrafluoroethylene (PTFE) membranes are studied. The microporous membrane allows sufficient water to pass for it to be used as a reagent gas for chemical ionization. Both types of membranes provide detection limits in the parts per trillion (pptr) to parts per billion (ppb) range with a linear dynamic range of 3 orders of magnitude for some volatile organic compounds. Results show that there is no detectable matrix effect on response in the selected cases examined. The use of microporous membranes to analyze more polar compounds, such as 5-hydroxymethyl furfuraldehyde and lactic acid, is also demonstrated. The effects of other experimental parameters, such as membrane temperature and length, on sensitivity are also investigated.     

Ink‐Jet Microdispensing for the Formation of Gradients of Immobilised Enzyme Activity

Summary: The integration of gradients of enzyme activity in microstructured biosensor arrays enables intrinsic on‐line quality control of biosensor performance. Multiple sensor elements with different compositions and hence varying responses for the same analyte are evaluated as a basis for improving data reliability. The formation of glucose oxidase/polymer microstructures using a piezo microdispenser and their examination by scanning electrochemical microscopy (SECM) are used to demonstrate the feasibility of this approach.

Optical microscope image of grids obtained by dispensing of 1 mg/mL GOx and 2 mg/mL Vinnapas® mixture.     

Kinetics of the surface tension of micellar solutions: Comparison of different experimental techniques

The kinetics of the surface tension of micellar solutions of nonionic surfactant Triton X-100 is measured experimentally by means of three different techniques: oscillating jet, maximum bubble pressure and inclined plate. They allow to study the micellization kinetics at various time scales (from a few milliseconds to a few seconds) in fairly large concentration region up to 50 times CMC. The experimental data are satisfactorily explained by a theoretical model accounting for the kinetics of micellization, diffusion of surfactant species and expansion of the bubble interface. By this model are computed the characteristic times of diffusion and micellization, which are of comparable magnitude (about 5 to 200 ms), and the Gibbs' elasticity. The micellization time constant corresponds to the slow relaxation process known to coincide with the disintegration of micelles. Comparing our data with other data from literature one can conclude that more realistic information for the micellization kinetics is obtained by the maximum bubble pressure and the oscillating jet method. The inclined plate seems too slow to measure the relaxation processes in micellar solutions of this surfactant.     

Extension rate of the straight jet in electrospinning of poly(N‐isopropyl acrylamide) solutions in dimethylformamide: Influences of flow rate and applied voltage

In the electrospinning process, the measurement of extension rate of the straight jet is not an easy task. In this study, the diameter profile of the tapering straight jet is determined with a laser light‐scattering technique. Afterwards, the jet extension rate () is derived and used to compare with the solution‐intrinsic rates, for example, the terminal relaxation rate and the Rouse relaxation rate. The extension rate of the straight jet depends on position: it is highest near the cone apex (region I) and decays to a constant value in the major jet (region II) until approaching the jet end (region III), at which the extension rate abruptly drops to nearly zero, that is, _I >_II ≫_III ∼ 0. The jet diameter in region III is independent of solution concentration and applied voltage, but is scaled to the flow rate with an exponent of ∼0.37. The derived exponent is consistent with a simple prediction based on the counterbalance between the stretching electric force and the compressive force induced by the air drag force. Provided that air friction becomes overwhelming at the straight jet end, the long electrified jet is likely to buckle, thereby triggering the instability of jet whipping. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 319–329     

喷气燃料裂解产物中芳烃的全二维气相色谱-质谱分析

采用全二维气相色谱-质谱联用仪(GC×GC-MS),通过优化程序升温和调制周期,建立了喷气燃料裂解产物中芳烃的定性定量分析方法。该方法对多环芳烃(PAH)同分异构体具有良好的分离能力。利用MS检测器谱库检索结果、芳烃标准品及相关的文献报道,对喷气燃料裂解产物中常见的单环芳烃、二环芳烃、三环芳烃及四环芳烃等共27种芳烃进行了准确定性,并利用外标GC×GC-FID法对其进行定量。定量结果表明,芳烃含量均随着裂解产气率的增加而增大,当裂解产气率达到22%时,二环芳烃开始产生,且其含量随着裂解产气率的增加呈指数形式增加。该方法与传统的气相色谱-质谱相比,具有更好的分离及定性能力,可应用于复杂样品的分离及其定性定量分析。