水泥混凝土路面裂缝成因与质量控制

水泥混凝土路面普遍存在板块裂缝问题.结合常见的几种裂缝形式,分析了产生裂缝的原因,提出了加强多方面综合控制的方法和处理措施.     

某型工程车系统可靠性分析

本应用失效树分析法,以某型工程车进行了可靠性分析,建立了该系统的失效树,在此基础上用最小割集法和系统失效树的可靠性仿真法计算了该系统的可靠性参数,并对一些结果进行了比较。     

土木工程投标报价模型研究(英文)

本文主要研究单一不可分土木工程的n人投标报价模型.报价高低不是是否中标的唯一决定性因素,施工方案和工程报价为赢得工程施工合同共同发挥组合效应,并且在一定条件下,通过工程竟标,中标价会趋于Nash平衡.     

生物转化生产1,3-丙二醇的研究进展

综述了近几年生物转化生产1,3－丙二醇的研究进展,介绍了1,3－丙二醇工业生产的现状、生物转化的菌种及其生产能力、生物转化1,3－丙二醇的代谢途径、甘油的同底物发酵及基因工程对菌种的改造,展望了今后研究的发展方向。     

具有频率和振型概率约束的工程结构动力优化设计

对随机参数结构建立了具有频率、频率禁区和振型位置概率约束的结构动力优化设计数学模型;利用一次二阶矩法对概率约束进行了等价化处理,推导了频率、振型节点位置和可靠性指标对设计变量的灵敏度表达式;利用子空间迭代法和混合罚函数法求解,通过梁和板两个结构算例证明文中模型的合理性和求解方法的有效性。     

Mathematical Modeling of Atom‐Transfer Radical Polymerization Using Bifunctional Initiators

Summary: Bifunctional initiators can produce polymers with higher molecular weight at higher initiator concentrations than monofunctional initiators. In this study, we developed a mathematical model for ATRP with bifunctional initiators. The most important reactions in ATRP were included in the model. The method of moments was used to predict monomer conversion, average molecular weights and polydispersity index as a function of polymerization time in batch reactors. The model was used to understand the mechanism of ATRP and to quantify how polymerization conditions affect monomer conversion and polymer properties by examining the effect of several rate constants (activation, deactivation, propagation and chain termination) and of catalyst and initiator concentration on polymerization kinetics and polymer properties. When compared to monofunctional initiators, bifunctional initiators not only produce polymers with higher molecular weight averages at higher polymerization rates, but also control their molecular weight distributions more effectively.

Effect of initial catalyst concentration on polydispersity index as a function of time.     

Clinical Application of Resorbable Polymers in Guided Bone Regeneration

Summary : Guided bone regeneration was shown to be successful in vitro and in vivo using resorbable or nonresorbable materials. Resorbable material has the advantage of progressive substitution by bone. Resorbable polymers of ∝-hydroxy acids like polylactide or polyglycolide are commonly used for tissue engineering and in guided bone regeneration. In clinical studies, guided bone regeneration was successful in non-weight bearing bone, e.g. in dental surgery and craniofacial surgery. This paper reports the preliminary result of using resorbable poly(L/DL-lactide) 80/20% scaffolds in weight bearing bone with infected large segmental defects as well as in small bony defects of hand due to benign tumour, bone graft donor sites and as an adjunct for joint fusion. Resorbable polylactide implants were used in the form of membranes, large 3-D sponges, chips or as injectable paste. Implants were impregnated with marrow blood to add an osteoinductive component. Long-term follow up revealed that these implants are promising candidates for bone graft substitutes.     

Biodegradable Polyesters for Tissue Engineering

Summary: Paper describes basic characteristics of synthesis and properties of aliphatic polyesters used for tissue engineering. Described is also synthesis of polyester containing block copolymers suitable for surface modification. Described are methods used for scaffold fabrication with required porosity. In particular, presented are methods according to which scaffolds are made from prefabricated polyester micro- and nanoparticles.     

Dynamic Monte Carlo Simulation of Olefin Polymerization in Stopped-Flow Reactors

Stopped-flow reactors are very useful to estimate olefin polymerization rate constants and to investigate particle morphology development. Because the residence time in these reactors is comparable to the life time of the polymer chains, very narrow molecular weight distributions are obtained and the number average molecular weight is proportional to reactor residence time. In this case, traditional models for olefin polymerization in industrial reactors can not be applied. In this contribution, we derived analytical solutions and performed Monte Carlo simulations to describe the time evolution of the molecular weight distribution of polyolefins made with single- and multiple-site catalysts in stopped-flow reactors.     

溶液喷丝法制备组织工程无纺布支架

在高压氮气作用下用溶液喷丝制备了组织工程支架.聚乙二醇/聚对苯二甲酸丁二醇酯(PEGT/PBT)共聚物的氯仿溶液经高压氮气流喷丝,继而沉积成无纺布.为了提高支架的生物相容性,将透明质酸水溶液喷涂到PEGT/PBT丝表面.结果表明,所制备的支架材料的生物相容性良好,细胞外基质透明酸能显著提高无纺布支架的生物相容性.