Critical Comparison of Four Simple Adaptors for Flow Amperometric and Stripping Voltammetry with Mercury Drop Electrodes in Batch Cells

Electrochemical batch cells with mercury drop electrodes, MDEs, are readily available from a number of producers and widely used in electroanalysis for polarography, voltammetry and stripping voltammetry. To increase sample throughput and reduce reagent and sample consumption, the tendency is to couple the MDE with flow analysis systems (e.g., FIA, SIA or BIA). Many special flow cells for MDEs are described in the literature, but it is easier to convert existing commercial batch cells to flow operation. To assess the performance of such flow adaptors, four models were chosen because they are directly fitted to the glass capillary of any MDE, light enough not to impair the mechanical drop knocker and can be effortlessly built in the laboratory. They were all found adequate for flow amperometry and stripping voltammetry, with differences in sensitivity, flow rate dependence, response time, drop stability, tolerance to bubbles, uncompensated resistance and recontamination of disposed analyte from the electrolytic bath. Two of them, a simple L‐shaped PTFE tube and an upstream nozzle holder made from a disposable pipette tip, gather a larger set of desirable features.     

4-Hydroxy-2-quinolones 120. Synthesis and structure of ethyl 2-hydroxy-4-oxo-4H-pyrido-[1,2-a]pyrimidine-3-carboxylate

An improved method for the preparation and purification of ethyl 2-hydroxy-4-oxo-4H-pyrido[1,2-a]-pyrimidine-3-carboxylates is proposed. According to ¹H and ¹³C NMR spectroscopic data the synthesized compounds exist in DMSO solution in the 2-hydroxy-4-oxo form while in the crystal (at least for the case of the unsubstituted derivative) X-ray analysis shows that it occurs in the bipolar 2,4-dioxo form. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 864–876, June, 2007.     

Comparative study on separation of diastereomers by HPLC

Summary Reversed (RP-HPLC) and normal phase chromatographic (NP-HPLC) separations have been developed for diastereomers ofN-acyl-1-methyl-1,2,3,4-tetrahydo-β-carbolines which are acylated derivatives of simple natural β-carboline alkaloids. Separations of derivatives having different acyl moieties in theO,O-diacyl-tartaric acid ester subtituent differed remarkably. Little or no resolution in either NP-HPLC or RP-HPLC could be achieved with the diacetyl-tartrate derivative. Base-line separation by RP-HPLC but no separation by NP-HPLC was possible with the bulkier and more apolar dipivaloyl derivative. Retention order of the bis-benzoylated diastereomers was reversed and separation time increased dramatically by RP-HPLC. Good separation of the medium polarity, but rigid,N-camphanyl derivative by NP-HPLC has been achieved, whereas RP-HPLC could not be used for separation of these diastereomers. Separability of different diastereomers was highly dependent on polarity and rigidity of the derivatizingN-acyl moieties. Conformational analysis by molecular mechanics and comparison of the lowest energy conformational states of the diastereomers was applied to rationalise separation-retention behaviour of stereoisomers by RP-HPLC. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples

A rapid, simple and rugged procedure without requiring any prior sample treatment was developed for the determination of acetylsalicylic acid (ASA) in tablets formulations by solid-phase fluorescence spectroscopy. The method was carried out on powdered samples, consisting of an active substance dispersed in lactose, maize starch, talc and magnesium stearate. Previous knowledge of the sample bulk composition is needed for proper application of the method. Wavelengths for maximum excitation and emission were 288 and 318 nm, respectively, and the fluorescence intensity was linear with ASA concentration within the 50-170 mg g⁻¹ range. Detection and quantification limits were 2.2 and 7.3 mg g⁻¹, and the analytical frequency was 200 h⁻¹. For a typical sample, the relative standard deviation of results was estimated as 2.3% (n = 10). Accuracy was assessed by comparing the analytical results obtained with the proposed method with those related to a reference method recommended by British Pharmacopoeia: no differences between the methods were found at the 95% confidence level.     

Simultaneous spectrophotometric determination of ethinylestradiol and levonorgestrel by partial least squares and principal component regression multivariate calibration

Two spectrophotometric methods for the determination of Ethinylestradiol (ETE) and Levonorgestrel (LEV) by using the multivariate calibration technique of partial least square (PLS) and principal component regression (PCR) are presented. In this study the PLS and PCR are successfully applied to quantify both hormones using the information contained in the absorption spectra of appropriate solutions. In order to do this, a calibration set of standard samples composed of different mixtures of both compounds has been designed. The results found by application of the PLS and PCR methods to the simultaneous determination of mixtures, containing 4–11 μg ml⁻¹ of ETE and 2–23 μg ml⁻¹ of LEV, are reported. Five different oral contraceptives were analyzed and the results were very similar to that obtained by a reference liquid Chromatographic method.     

Asymmetric synthesis of (R)-S-(1,2,4-triazol-3-yl)cysteines by nucleophilic addition of triazolethiols to a NiII complex with a chiral dehydroalanine Schiff base

An efficient method was developed for the asymmetric synthesis of (R)-S-(1,2,4-triazol-3-yl)cysteines by the addition of 3,4-disubstituted 1,2,4-triazole-5-thiols at the electrophilic C=C bond in a Ni^II complex of a Schiff base of dehydroalanine with (S)-N-(N-benzylprolyl)aminobenzophenone. The stereoselectivity of the formation of diastereomeric complexes with the (S,R) configuration under conditions of thermodynamic control of the nucleophilic addition exceeds 94%. Acid treatment of the reaction mixtures afforded enantiomerically pure (R)-S-hetarylcysteines (ee >98%).     

Biocatalysis and biorecognition in nonaqueous media. Some perspectives in analytical biochemistry

Biocatalysis and, to a lesser extent, biorecognition in non-aqueous media (including organic solvents as well as supercritical fluids and gases) constitute at present an exciting research area which has already demonstrated its biotechnological potential in numerous, varied applications. Less attention, however, has been paid to its analytical possibilities, even though many advantages have been postulated and a wide range of poorly water-soluble analytes are present in samples (or waste materials) from food and drink, petrochemical, pharmaceutical, military and other industries. The main approaches, developed in recent years to exploit the use of enzymes, antibodies or antibody mimics in water-restricted environments for analytical purposes, as well as possible future directions are briefly discussed.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 1. Voltammetric e-tongue for the determination of oxidizable compounds

A sequential injection analysis (SIA) system was developed with the aim of obtaining an automatic and versatile way to prepare standards needed in the study of systems with higher dimensional sensor signals. To illustrate this, different analytical techniques were used in determinations of several analytes. Automated potentiometric calibrations of different potentiometric sensors, with and without interference, were carried out. Useful determinations of selectivity coefficients with two degrees of freedom were obtained. Simultaneous voltammetric determinations have also been done. Firstly, simultaneous determinations of lead and cadmium, using epoxy-graphite composite as the working electrode, have enabled a separate calibration for each metal to be obtained. Next, a voltammetric electronic tongue was designed and applied to the determination of oxidizable species. The use of artificial neural networks has solved the overlapped signal of ascorbic acid, 4-aminophenol and 4-acetamidophenol (paracetamol). A set of 63 data points was prepared automatically and has facilitated the training of an electronic tongue for these three analytes. Accurate predictions of test solutions, in the range of 12–410 μM for ascorbic acid, 17–530 μM for 4-aminophenol and 10–420 μM for paracetamol, have been achieved with RMSEs lower than 0.10 μM.     

Synthesis of non-equilibrium PtxOs1−x Solid solutions. Crystal structure of [Pt(NH3)4][OsCl6]

Several non-equilibrium solid solutions belonging to the platinum-osmium systems Os_0.9Pt_0.1, Os_0.8Pt_0.2, Os_0.5Pt_0.5, Os_0.7Pt_0.3, Os_0.75Pt_0.25 are prepared and studied. The thermal decomposition of [Pt(NH₃)₄][OsCl₆] in the hydrogen and helium atmosphere is investigated. It is found that the Pt_0.5Os_0.5 solid solution develops through the formation of (NH₄)₂[OsCl₆] and a metallic phase based on Pt. The crystal structure of a double complex salt [Pt(NH₃)₄][OsCl₆] is studied (X8-APEX Bruker, 1508 independent reflections, R = 2.04%). Crystal data for PtOsN₄Cl₆H₁₂ are: a = 11.6216(5) Å, b = 11.0016(5) Å, c = 10.3819(5) Å, V = 1327.4(1) ų, space group Cmca, Z = 4, d _x = 3.333 g/cm₃. The coordination polyhedron around Os is octahedral: 〈Os-Cl〉 2.357 Å, ∠Cl-Os-Cl 89.5–90.5°, while around Pt it is square-planar: Pt-N 2.046 Å, ∠ N-Pt-N 89.59° and 90.41°.