Effects of Charged Surfactants on Interfacial Water Structure and Macroscopic Properties of the Air-Water Interface

Surfactants are used to control the macroscopic properties of the air-water interface. However, the link between the surfactant molecular structure and the macroscopic properties remains unclear. Using sum-frequency generation spectroscopy and molecular dynamics simulations, two ionic surfactants (dodecyl trimethylammonium bromide, DTAB, and sodium dodecyl sulphate, SDS) with the same carbon chain lengths and charge magnitude (but different signs) of head groups interact and reorient interfacial water molecules differently. DTAB forms a thicker but sparser interfacial layer than SDS. It is due to the deep penetration into the adsorption zone of Br⁻ counterions compared to smaller Na⁺ ones, and also due to the flip-flop orientation of water molecules. SDS alters two distinctive interfacial water layers into a layer where H⁺ points to the air, forming strong hydrogen bonding with the sulphate headgroup. In contrast, only weaker dipole-dipole interactions with the DTAB headgroup are formed as they reorient water molecules with H⁺ point down to the aqueous phase. Hence, with more molecules adsorbed at the interface, SDS builds up a higher interfacial pressure than DTAB, producing lower surface tension and higher foam stability at a similar bulk concentration. Our findings offer improved knowledge for understanding various processes in the industry and nature.     

Efficient One-Step Passivation of Polyurethane Using Transurethanization

The uncontrolled accumulation of biological materials on the surface of medical devices through protein adsorption or cell adhesion causes adverse biological reactions in the living host system, leading to complications. In this study, poly(ethylene glycol) (PEG) is successfully grafted onto polyurethane (PU) surfaces by using a new strategy through a simple and efficient transurethanization reaction. The PEG hydroxyl group is deprotonated and then reacted with the PU surface to provide antiadhesive hydrophilic surfaces in a single step. Surface analysis techniques proved the grafting to be efficient and the formation of a hydrophilic polymeric layer at the surface of PU. Biological assays showed that the surface modification induced lower protein adsorption, cell, platelet, and bacterial adhesion than untreated surfaces, showing a potential for biomedical applications.     

刚棒-线团分子的自组装研究进展

超分子化学领域的自组装研究是近年来研究的热点,对这种由一种或多种结构单元自发聚集而成具有一定尺寸和结构的过程研究已经取得了重大进展.以亲水基团和亲脂基团为主要构成单元的两亲性分子在自组装领域中的表现优异于其他分子,其亲水的刚性棒状基团和疏水的柔性线团基团通过不同方法共同构成了各种类型的刚柔两亲性分子,而在水溶液中自组装...     

还原氧化石墨烯@泡沫镍载CoO纳米花电极制备及催化CO2性能

本文以氧化石墨烯包覆泡沫镍电极(GO@NF)作为基底,采用水热法在GO@NF基底上原位生长CoO纳米花,同时GO在水热过程中被同步热还原为还原氧化石墨烯(RGO),从而一步制得还原氧化石墨烯包覆泡沫镍负载CoO纳米花电极(CoO/RGO@NF)。使用XRD和SEM对CoO/RGO@NF电极进行表征,发现CoO纳米花均匀生长在泡沫镍三维网络结构上,CoO纳米花为大量针状纳米棒围绕一个中心而成的花状结构,纳米棒的长度约为10 ~ 15 μm,直径约为100 ~ 200 nm。使用循环伏安和线性扫描法测试了CoO/RGO@NF电极电催化CO₂的还原性能,在-0.76 V（vs. SHE）电位下,CoO/RGO@NF电极电催化CO₂还原的电流效率达到70.9%,产甲酸法拉第效率达到65.2%,甲酸产率为59.8 μmol·h^-1·cm^-2,且电极可持续稳定电催化还原CO₂ 4 h,表明CoO/RGO@NF电极对CO₂电还原有着优良的催化活性、选择性和稳定性。     

高性能NiCoP基超级电容器电化学性能

采用水热和低温磷化反应两步法,在无添加沉淀剂条件下成功在泡沫镍上合成纳米花状镍钴磷化物(NiCoP/NF).研究结果表明,镍/钴元素物质的量之比为1∶1时,在1A·g-1电流密度下,Ni1/2Co1/2P/NF的比容量高达1276.36 F·g-1,在10A·g-1电流密度下充放电循环3000次后,比容量保持率为78....     

Ni(OH)2修饰的三聚氰胺泡沫用于可压缩超级电容器电极

通过化学镀和电化学镀的方法制备了一种Ni(OH)₂电化学活性材料修饰三聚氰胺泡沫(MF)可压缩骨架的超级电容器电极材料MF/Ni(OH)₂。MF/Ni(OH)₂可压缩电极材料表现出最佳的电容性能,例如循环稳定性(即使在40 mA/cm^-3的电流密度下经过2000次充放电循环后,可压缩电极仍能保持90.63%的初始电容)和可压缩稳定性(即使在压缩率为50%时,仍具有97.88%的电容保持率)。层状可压缩超级电容器由MF/Ni(OH)₂弹性材料作为阳极,镍/碳(Ni/C)为阴极以及实验室中常用的滤纸作隔膜材料组成。这种超级电容器装置在不同的压缩下表现出良好的电化学性能和优异的压缩稳定性。最后,使用可压缩的超级电容器来点亮LED灯,以展示其在柔性电子设备中的应用。这些优化的电化学和机械性能表明MF/Ni(OH)₂可作为可压缩超级电容器的应用中的候选电极。     

TPU增韧MABS的研究

利用双螺杆挤出机制备聚氨酯和甲基丙烯酸甲酯—丙烯腈-丁二烯-苯乙烯树脂熔融共混物(合金).研究TPU的类型以及含量对TPU/MABS合金的透光率、力学性能和缺口冲击强度影响.结果表明:TPU/MABS合金可以保持较好透明性,随TPU含量的增加,合金材料的拉伸强度和弯曲模量逐渐降低,但是合金材料的冲击强度得到明显提高.扫...     

聚偏氟乙烯/聚醚型热塑性聚氨酯弹性体共混物的相互作用及增容机理

采用流延成膜法制备了4种增容改性的聚偏氟乙烯（PVDF）与聚醚型热塑性聚氨酯弹性体（TPU）固体共混物（PVDF/TPU）.结合分子动力学模拟研究了PVDF/TPU的相互作用,并探讨了其增容机理.研究结果表明,与PVDF/TPU-1,PVDF/TPU-2及PVDF/TPU-3相比,加入γ-缩水甘油醚氧丙基三甲氧基硅烷-端氨基丁腈橡胶（GPTMS-ATBN）后,PVDF/TPU-4的2个玻璃化转变温度（T_g）相互靠近,两相界面存在分布梯度,构成了双相连续的微观结构,表明GPTMS-ATBN增容PVDF/TPU共混物具有显著效果.同时,PVDF/TPU-4的共混结合能大幅减小,二面角扭转能、键角弯转能等明显增大,表明PVDF及TPU与GPTMS-ATBN之间发生相互作用.傅里叶红外光谱（FTIR）及X射线光电子能谱（XPS）证实了GPTMS-ATBN增容PVDF/TPU的机理为GPTMS-ATBN中ATBN链段与PVDF彼此缠绕,相互混溶,而水解后两端GPTMS中大量羟基与TPU分子链中氨基甲酸酯键及醚键相互吸附,从而生成了氢键.     

A novel method to prepare microcellular poly(vinyl alcohol) foam based on thermal processing and supercritical fluid

Combining the thermal processing and supercritical fluid technology develops a novel preparation method of microcellular poly(vinyl alcohol) (PVA). Water, as the plasticizer in system, can form the hydrogen bonding with pendant hydroxyl of PVA and weaken its strong intermolecular and intramolecular forces to realize the thermal processing. Supercritical carbon dioxide (sc‐CO₂) can easily dissolve into water‐plasticized PVA (WPVA) because of the destruction of crystal region caused by water, and the enhanced sc‐CO₂ solubility can greatly improve the foamability of WPVA. The porous structure generates through the saturation of sc‐CO₂ in WPVA sample and followed by pressure drop‐induced phase separation. The foaming behavior of WPVA was studied as a function of saturation pressure, foaming temperature, and saturation time. The cell density, cell size, and distribution of the obtained foam can be controlled by tuning processing conditions. The results revealed that the cell size decreased, and its distribution narrowed with saturation pressure increasing, or decrease of foaming temperature. But excessively increasing the saturation time generated a negative effect on the foaming behavior owing to the deteriorated plasticization effect resulted from the loss of water. Copyright © 2016 John Wiley & Sons, Ltd.     

Transient deformation and heat generation of solid polyurethane under impact compression

This investigation examines the transient deformation and heat generation of a solid polyurethane subjected to dynamic compression. A special method is presented to prepare the solid polyurethane from raw materials which are commonly used to make polyurethane foams. Testing methods including infrared spectrum, differential scanning calorimetry, quasi-static and dynamic compression were applied to study the basic physical properties of the solid polyurethane. High-speed optical and infrared imaging systems are used to obtain visual and thermo-graphic images during impact tests. Under quasi-static compression, the solid polyurethane presents a good performance in toughness. This is confirmed by its Poisson's ratio. Under impact compression, the adiabatic heat generation are identified statistically. Temperature distribution confirms the fact of transient heat generation in specimens. Adiabatic self-heating mechanism provides a consideration to understand the negative strain-rate effect and post-yield softening effect found in the solid polyurethane. Mechanical properties including quasi-static and dynamic responses are related with the composition of molecular and structure of polymer.