中国聚变工程实验堆真空室超压保护系统中爆破片的选型与计算

参照相关标准,对聚变装置真空室超压保护系统(VVPSS)中爆破片进行了选型。结合VVPSS的工作要求,完成了爆破片的设计计算,初步得到爆破片直径为882mm,厚度为1mm。利用有限元分析软件对多种型号爆破片进行结构分析比较,最终选用了反拱环向开缝型爆破片。对最终选定的爆破片进行优化设计,使其达到设计要求。     

Identifying the viscoelastic properties of soft matter from the indentation response of a hard film-soft substrate system

The indentation technique is widely used in measuring the mechanical properties of soft matter at the microscale or nanoscale,but still faces challenges by these unique properties as well as the consequent strong surface adhesion, including the strong nonlinear effect, unclear judgment of the contact point, difficulties in estimating the contact area, and the risk of the indenter piercing the sample. Here we propose a two-step method to solve these problems: lay a hard film on a soft matter, and obtain the viscoelastic properties of this soft matter through the indentation response of this composite structure. We first establish a theoretical indentation model of the hard film-soft substrate system based on the theory of plates, elastic-viscoelastic correspondence principle and Boltzmann superposition principle. To verify the correctness of this method, we measure the mechanical properties of the methyl vinyl silicone rubber(MVSR) covered by a Cu nanofilm. Finally, we test the effectiveness and error sensitivity of this method with the finite element method(FEM). The results show that our method can accurately measure the mechanical properties of soft matter, while effectively circumventing the problems of the traditional indentation technique.     

概率盒框架下混合认知不确定声场的响应预测

针对含概率盒-证据混合认知不确定参数声场的响应预测问题,提出了一种概率盒框架下的改进区间蒙特卡洛方法。该方法首先将混合认知不确定参数转换为纯概率盒形式,然后结合有限元方法推导出混合认知不确定声场的盖根鲍尔多项式代理模型,再采用蒙特卡洛方法求解代理模型得到声压响应。以含概率盒-证据混合认知不确定参数的二维管道声场模型和卡车乘客舱声腔模型为例,计算结果表明混合认知不确定参数影响下的声压响应为概率盒形式,其包括声压响应极值和相应的概率信息,并且所提方法较常规混合离散方法效率更优,较基于一阶摄动法的区间蒙特卡洛方法准确性更高。研究结果表明:所提方法可以有效预测混合认知不确定声场的声压响应,并可进行声学性能的风险和保守估计。     

High efficiency and broad bandwidth terahertz vortex beam generation based on ultra-thin transmission Pancharatnam–Berry metasurfaces

The terahertz(THz) vortex beam generators are designed and theoretically investigated based on single-layer ultra-thin transmission metasurfaces. Noncontinuous phase changes of metasurfaces are obtained by utilizing Pancharatnam–Berry phase elements, which possess different rotation angles and are arranged on two concentric rings centered on the origin.The circularly polarized incident THz beam could be turned into a cross-polarization transmission wave, and the orbital angular momentum(OAM) varies in value by lh. The l values change from ±1 to ±5, and the maximal cross-polarization conversion efficiency that could be achieved is 23%, which nearly reaches the theoretical limit of a single-layer structure.The frequency range of the designed vortex generator is from 1.2 THz to 1.9 THz, and the generated THz vortex beam could keep a high fidelity in the operating bandwidth. The propagation behavior of the emerged THz vortex beam is analyzed in detail. Our work offers a novel way of designing ultra-thin and single-layer vortex beam generators, which have low process complexity, high conversion efficiency and broad bandwidth.     

Effects of Nb and Si on densities of valence electrons in bulk and defects of Fe3Al alloys

Positron lifetime measurements have been performed in binary Fe₃Al and Fe₃Al doping with Nb or Si alloys. The densities of valence electrons of the bulk and microdefects in all tested samples have been calculated by using the positron lifetime parameters. Density of valence electron is low in the bulk of Fe₃Al alloy. It indicates that, the 3d electrons in a Fe atom have strong-localized properties and tend to form covalent bonds with Al atoms, and the bonding nature in Fe₃Al is a mixture of metallic and covalent bonds. The density of valence electron is very low in the defects of Fe₃Al grain boundary, which makes the bonding cohesion in grain boundary quite weak. The addition of Si to Fe₃Al gives rise to the decrease of the densities of valence electrons in the bulk and the grain boundary thus the metallic bonding cohesion. This makes the alloy more brittle. The addition of Nb to Fe₃Al results in the decrease of the ordering energy of the alloy and increases the density of valence electron and the bonding cohesion of the grain boundary. However, since the radius of Nb atom is larger than that of Fe atom, when Nb atoms substitute for Fe atoms, they will distort the lattice and enlarge the volume of the lattice, which decreases the density of valence electron and the cohesion of metallic bond in the bulk of the alloy. Project supported by the National Natural Science Foundation of China (Grant No. 59561001) and the Foundation of Guangxi Education Committee.     

Time-dependent Ginzburg–Landau equations for multi-gap superconductors

We numerically solve the time-dependent Ginzburg–Landau equations for two-gap superconductors using the finite-element technique. The real-time simulation shows that at low magnetic field, the vortices in small-size samples tend to form clusters or other disorder structures. When the sample size is large, stripes appear in the pattern. These results are in good agreement with the previous experimental observations of the intriguing anomalous vortex pattern, providing a reliable theoretical basis for the future applications of multi-gap superconductors.     

二维剪切波面重建的有限元模型

提出了解析二维剪切波面的有限元方法，建立了二维剪切波面重建的有限元模型。计算模拟结果表明，有限元法解析二维剪切波面精度高，对剪切波面具有平均作用，对测量误差不敏感，可适用于实时测量。     

拟线性双曲方程类Wilson非协调元的高精度分析

主要研究类Wilson元对拟线性双曲方程的逼近.首先证明了当问题的解u∈H~3(Ω)或u∈H~4(Ω)时,u与其双线性插值之差的梯度与类Wilson元空间任意元素的梯度,在分片意义下的内积可以达到O(h~2)这一重要结论.其次运用能量模意义下该元的非协调误差可以分别达到O(h~2)/O(h~3),即比插值误差高一阶/二阶这一性质,并利用对时间t的导数转移技巧,结合双线性元的高精度结果及插值后处理技术,获得了O(h~2)阶的超逼近性和整体超收敛性,从而进一步拓广了该元的应用范围.     

干式变压器有限元仿真模型的电磁和振动分析

随着电力需求的逐年增长,干式变压器的数量也在不断增加。干式变压器在运行时存在着振动和噪声的问题,为了对干式变压器振动的规律与特点进行研究,本文建立了干式变压器本体振动的有限元仿真模型,通过电磁分析获得相应的磁场分布,然后利用结构动力学分析得到其本体振动的相关规律。通过对处于运行状态的变压器振动数据进行实测分析,得到变压器振动的特征频率,然后对仿真结果进行对比分析,可以发现振动幅度与频率之间存在的关系。本文的研究结果可对干式变压器的减振降噪研究提供参考。     

宽体液腔Janus-Helmholtz换能器

该文使用有限元方法对宽体液腔Janus-Helmholtz(JH)换能器进行了仿真分析,得出了壳体宽度拓展增量对JH换能器工作性能的影响规律。使用三维建模的方式,分析了连接部分对换能器性能的影响及宽体壳体的模态,证明了三维建模的必要性。依据仿真优化结构设计了一款宽体液腔JH换能器并进行了湖上测试。最终测试结果与仿真结果有很好的一致性,相较直筒JH换能器其谐振频率降低300 Hz,发射电压响应最高可达144 dB。